76–2
REPLACEMENT
HINT:
Installation is in the reverse order of the removal.
1. REMOVE RADIATOR GRILLE SUB–ASSY
(a) Remove the 2 bolts and clip.
(b) Using a screwdriver, remove the radiator grille.
HINT:
Tape the screwdriver tip before use.
B59104
2. REMOVE FRONT BUMPER COVER
Hook
(a) Remove the 6 screws and 2 clips.
(b) Disengage the hook, and remove the front bumper cover .
(c) w/ Fog light:
3. REMOVE FRONT BUMPER ENERGY ABSORBER
–EXTERIOR/INTERIOR TRIM FRONT BUMPER
760HY–02
But the installation is indicated only when it has a point.
Disconnect the fog light connectors.
B59105
4. REMOVE FRONT BUMPER REINFORCEMENT
(a) Disconnect the wire harness clamp.
(b) Remove the 4 nuts and front bumper reinforcement.
B59112
5. REMOVE FRONT BUMPER SIDE MOUNTING BRACKET LH
6. REMOVE FRONT BUMPER SIDE MOUNTING BRACKET RH
7. REMOVE FRONT LH SPOILER SUB–ASSY (W/ FRONT SPOILER)
(a) Remove the screw and 4 retainers.
(b) Disengage the clip and front LH spoiler.
(c) Employ the same manner described above to the other side.
8. REMOVE FRONT RH SPOILER SUB–ASSY (W/ FRONT SPOILER)
9. REMOVE FOG LIGHT UNIT LH (W/ FOG LIGHT)
(a) Remove the nut and fog light unit.
(b) Employ the same manner described above to the other side.
10. REMOVE FOG LIGHT UNIT RH (W/ FOG LIGHT)
11. REMOVE FRONT BUMPER HOLE COVER LH (W/O FOG LIGHT)
12. REMOVE FRONT BUMPER HOLE COVER RH (W/O FOG LIGHT)
2004 COROLLA (RM1037U)
1857Author: Date:
B59112
76–3
–EXTERIOR/INTERIOR TRIM FRONT BUMPER
13. INSTALL FRONT BUMPER REINFORCEMENT
(a) Install the front bumper reinforcement with the 4 nuts.
Torque: 36 N⋅m (367 kgf⋅cm, 27 ft⋅lbf)
14. INSTALL RADIATOR GRILLE SUB–ASSY
(a) Install the radiator grille with the 2 bolts and clip.
Torque: 5.0 N⋅m (51 kgf⋅cm, 44 in.⋅lbf)
B59244
2004 COROLLA (RM1037U)
1858Author: Date: