Toyota Corolla 2004 Repair Manual - FRONT DOOR BELT MOULDING ASSY LH

76–12

–EXTERIOR/INTERIOR TRIM FRONT DOOR BELT MOULDING ASSY LH

FRONT DOOR BELT MOULDING ASSY LH

REPLACEMENT

HINT:

 The installation procedures are the removal procedures in reverse order.
 Use the same procedures for the RH side and LH side.

1. REMOVE FRONT ARMREST ASSY LH (See page 75–7)

2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSY (W/ POWER WINDOW)
(See page 75–7)

3. REMOVE FRONT ARMREST BASE PANEL UPPER LH (W/O POWER WINDOW)
(See page 75–7)

4. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSY (W/O POWER WINDOW)
(See page 75–7)

5. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH (See page 75–7)

6. REMOVE FRONT DOOR TRIM BOARD SUB–ASSY LH (See page 75–7)

7. REMOVE FRONT DOOR BELT MOULDING ASSY LH

(a) Put protective tape under the weatherstrip.
(b) Using a moulding remover, pry out the weatherstrip as

shown in the illustration.
HINT:
Tape the moulding remover tip before use.

760I8–02

Tape

Tape

Moulding Remover

B72676

2004 COROLLA (RM1037U)

1867Author: Date: