73–10
–THEFT DETERRENT & DOOR LOCK TRANSMITTER BATTERY
TRANSMITTER BATTERY
730B2–01
REPLACEMENT
1. REPLACE TRANSMITTER BATTERY
NOTICE:
Special caution should be taken for handling each component as they are precision electronic components.
(a) Using a screwdriver, pry out the transmitter case.
NOTICE:
Do not forcibly pry out the case.
HINT:
Tape the screwdriver tip before use.
Tape
B59380
B59371
(b) Remove the battery (lithium battery).
NOTICE:
Do not push the terminals with your finger.
Prying up the battery (lithium battery) to forcibly re-
move it will cause deformation of the terminals.
Do not touch the battery with wet hands. Water may
cause unexpected rust.
Do not touch or move any components inside the
transmitter as it may interfere with proper operation.
2. INSTALL TRANSMITTER BATTERY
(a) Install a new battery (lithium battery) with the positive (+)
side up, as shown in the illustration.
NOTICE:
Be sure that the positive side and the negative side of
the transmitter battery are matched–up correctly.
Be careful not to bend the electrode of the transmitter
battery insertion.
Be careful that dust or oil does not adhere to the trans-
mitter case.
(b) Install the case securely.
2004 COROLLA (RM1037U)
1802Author: Date: