Toyota Corolla 2004 Repair Manual - REAR SEAT ASSY

72–6

–SEAT REAR SEAT (SEDAN WITH SEPARATE TYPE)

OVERHAUL

1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSY

(a) Disengage the 2 clamps, and then remove the seat cush-

ion.

2. REMOVE SEPARATE TYPE REAR SEAT BACK ASSY

(a) Lean the seat back forward.
(b) Remove the 2 clips.
(c) Remove the 2 bolts and seat back LH.
(d) Employ the same manner described above to the other

B51101

3. REMOVE BENCH TYPE REAR SEAT CUSHION COVER

(a) Remove the hog rings and seat cushion cover.

4. REMOVE SEPARATE TYPE REAR SEAT BACK COVER

(a) Remove the hog rings, and then turn up the seat back cover LH.
(b) Remove the headrest supports, seat back cover LH and seat back pad LH.
(c) Employ the same manner described above to the other side.

5. INSTALL SEPARATE TYPE REAR SEAT BACK COVER

(a) Install the seat back pad LH to the seat back frame LH.
(b) Cover the top of the seat back with the seat back cover LH.
(c) Install the headrest supports.
(d) Using hog ring pliers, fully install the seat back cover LH with new hog rings.
(e) Employ the same manner described above the other side.

6. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

(a) Using hog ring pliers, install the seat cushion cover with new hog rings.

7. INSTALL SEPARATE TYPE REAR SEAT BACK ASSY

(a) Install the seat back LH with the 2 bolts and 2 clips.

Torque: 18 N⋅m (185 kgf⋅cm, 13 ft⋅lbf)

(b) Employ the same manner described above to the other side.

8. INSTALL BENCH TYPE REAR SEAT CUSHION ASSY

(a) Insert the seat cushion under the seat back.
(b) Engage the 2 clamps.

side.

720A0–01

2004 COROLLA (RM1037U)

1790Author: Date: