Toyota Corolla 2004 Repair Manual - INSTRUMENT PANEL SUB–ASSY LOWER

71–10

–INSTRUMENT PANEL/METER INSTRUMENT PANEL SUB–ASSY LOWER

7108J–02

REPLACEMENT

HINT:
COMPONENTS: See page 71–7

1. TABLE OF BOLT, SCREW AND NUT
NOTICE:
Be sure to tape the tip of the screwdriver when using it to disengage the meshing of the clips and
claws.

HINT:
Indicate the bolts, screws and nuts, which are necessary for installation and removal of the instrument panel,
in the illustration and the text with alphabets.

mm (in.) (L = Length)

Code Shape

φ=6
(0.24)
L=30

(1.18)

φ=8
(0.32)
L=18
(0.71)

φ=6
(0.24)
L=20

(0.79)

Code Shape Code Shape

φ=7

(0.28)

L=30
(1.18)

φ=6
(0.24)
L=16

(0.63)

φ=7
(0.28)
L=20

(0.79)

φ=6
(0.24)
L=20

(0.79)

φ=6
(0.24)
L=25

(0.98)

φ=5
(0.20)
L=14

(0.55)

φ=5
(0.20)
L=14

(0.55)

φ=5
(0.20)
L=16

(0.63)

2. PRECAUTION

3. SEPARATE BATTERY NEGATIVE TERMINAL(See page 60–1 )

4. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

5. REMOVE HORN BUTTON ASSY(See page 60–13 )

6. REMOVE STEERING WHEEL ASSY(See page 50–8)

SST 09950–50013 (09951–05010, 09952–05010, 09953–05020, 09954–05021)

2004 COROLLA (RM1037U)

φ=5
(0.20)

L=18
(0.71)

B59370

1776Author: Date:

71–11

–INSTRUMENT PANEL/METER INSTRUMENT PANEL SUB–ASSY LOWER

7. REMOVE METER HOOD SUB–ASSY

(a) Remove the clip.
(b) Using a screwdriver, disengage the 7 claws, then remove

the meter hood sub–assy.
HINT:
Tape the screwdriver tip before use.

7 Claws

B59341

8. REMOVE COMBINATION METER ASSY

(a) Remove the screw<L>.
(b) Disengage the 2 claws as shown in the illustration.
(c) Disconnect the connector, then remove the combination

meter assy.

B59342

9. REMOVE INSTRUMENT PANEL REGISTER ASSY

NO.1

(a) Using a moulding remover, disengage the 4 claws, then

remove the instrument panel register assy No.1.

: 4 Claws

B59344

10. REMOVE INSTRUMENT PANEL REGISTER ASSY NO.3

11. REMOVE FLOOR SHIFT SHIFT LEVER KNOB SUB–ASSY (M/T TRANSAXLE)

2004 COROLLA (RM1037U)

1777Author: Date:

71–12

–INSTRUMENT PANEL/METER INSTRUMENT PANEL SUB–ASSY LOWER

12. REMOVE CONSOLE PANEL UPPER

(a) Using a screwdriver, disengage the 6 claws.
HINT:
Tape the screwdriver tip before use.
(b) Disconnect the connector , then remove the console panel

upper.

6 Claws

B59343

13. REMOVE HEATER CONTROL KNOB

4 Clips
4 Claws

B59771

14. REMOVE INSTRUMENT CLUSTER FINISH PANEL

(a) Remove the screw<J>.
(b) Using a screwdriver, disengage the 4 clips and 4 claws,

then remove the instrument cluster finish panel.
HINT:
Tape the screwdriver tip before use.
(c) Disconnect the connectors.

NOTICE:
Do not pull the lid of auxiliary box.

4 Claws

2 Clips

: Stoppers

2004 COROLLA (RM1037U)

I32292

B59350

15. REMOVE INSTRUMENT CLUSTER FINISH PANEL

SUB–ASSY CENTER

(a) Remove the 4 screws<K>.
(b) Using a screwdriver, disengage the 2 clips and 4 claws,

then remove the instrument cluster finish panel sub–assy

center with radio receiver assy.
HINT:
Tape the screwdriver tip before use.
(c) Disconnect the connectors.

16. REMOVE GLOVE COMPARTMENT DOOR ASSY

(a) Remove the screw<I> from the glove compartment door

stopper sub–assy.
(b) Deform the upper part of the glove compartment door

assy to release the stoppers.
(c) Pull the glove compartment door assy upward to remove

it.

1778Author: Date: