Toyota Corolla 2004 Repair Manual - RADIO RECEIVER ASSY

67–3

–AUDIO & VISUAL SYSTEM RADIO RECEIVER ASSY

RADIO RECEIVER ASSY

670DY–01

REPLACEMENT

HINT:
COMPONENTS: See page 67–1

1. REMOVE FLOOR SHIFT SHIFT LEVER KNOB SUB–ASSY (M/T TRANSAXLE)(See page 71–10)

2. REMOVE CONSOLE PANEL UPPER(See page 71–10 )

3. REMOVE HEATER CONTROL KNOB(See page 71–10)

4. REMOVE INSTRUMENT CLUSTER FINISH PANEL(See page 71–10)

5. REMOVE INSTRUMENT CLUSTER FINISH PANEL
SUB–ASSY CENTER

(a) Remove the 4 screws.
(b) Using a screwdriver, disengage the 2 clips and 4 claws,

then remove the instrument cluster finish panel sub–assy
center with radio receiver assy.

HINT:

4 Claws

2 Clips

I32292

Tape the screwdriver tip before use.
(c) Disconnect the connectors.

Pin

4 Claws

6. REMOVE RADIO RECEIVER ASSY

(a) Disengage the 4 claws and 6 pins.
(b) Remove the radio receiver assy from the instrument clus-

ter finish panel sub–assy center.

Pin

I32293

7. REMOVE RADIO BRACKET NO.1

(a) Remove the 4 screws and radio bracket No. 1.

2004 COROLLA (RM1037U)

I32294

1715Author: Date:

67–4

Pin

–AUDIO & VISUAL SYSTEM RADIO RECEIVER ASSY

8. REMOVE RADIO BRACKET NO.2

(a) Remove the 4 screws and radio bracket No. 2.

I32295

9. INSTALL INSTRUMENT CLUSTER FINISH PANEL
SUB–ASSY CENTER

(a) Place the radio receiver assy temporarily on the instru-

ment panel sub–assy upper. (*1)

(b) Under the condition of (*1), engage the 6 pins and 4 claws

of the radio receiver assy with the instrument cluster finish
panel sub–assy center. (*2)

(c) Under the condition of (*2), slide the instrument cluster

finish panel sub–assy center and the radio receiver assy
forward of the vehicle.

4 Claws

4 Claws

2 Clips

Pin

I32293

(d) Connect the connectors and install the 2 clips and 4

claws.

(e) Install the 4 screws and instrument cluster finish panel

sub–assy center with radio receiver assy.

I32292

2004 COROLLA (RM1037U)

1716Author: Date: