67–9
–AUDIO & VISUAL SYSTEM ANTENNA CORD SUB–ASSY
ANTENNA CORD SUB–ASSY
670E3–01
REPLACEMENT
HINT:
COMPONENTS: See page 67–1
1. REMOVE INSTRUMENT PANEL SUB–ASSY UPPER(See page 71–10)
HINT:
Refer to the procedure until the step, ”REMOVE INSTRUMENT PANEL SUB–ASSY UPPER” of
INSTRUMENT PANEL SUB–ASSY LOWER.
Remove the related parts as long as the antenna cord sub–assy can be removed.
2. REMOVE VISOR HOLDER(See page 76–21)
HINT:
Refer to the procedure until the step, ”REMOVE VISOR HOLDER” of ROOF HEADLINING ASSY.
Remove the parts related to the roof headlining assy in the range that antenna cord can be cut off.
3. REMOVE SUN ROOF OPENING TRIM MOULDING (W/ SLIDING ROOF)
2 Clamps
4. DISCONNECT ANTENNA CORD SUB–ASSY
(a) REAR SIDE:
Disconnect the connector and antenna cord plug.
(b) REAR SIDE:
Remove the 2 clamps.
I32297
2004 COROLLA (RM1037U)
1721Author: Date:
67–10
–AUDIO & VISUAL SYSTEM ANTENNA CORD SUB–ASSY
(c) FRONT SIDE:
Remove the 9 clamps.
5. REMOVE ROOF HEADLINING ASSY(See page 76–21)
NOTICE:
Do not bend the roof headlining assy.
6. REMOVE ANTENNA CORD SUB–ASSY
(a) Remove the antenna cord sub–assy from the roof headlining.
9 Clamps
I32300
2004 COROLLA (RM1037U)
1722Author: Date: