66–6
–WIPER & WASHER WINDSHIELD WIPER MOTOR ASSY
WINDSHIELD WIPER MOTOR ASSY
REPLACEMENT
1. REMOVE WINDSHIELD WIPER ARM COVER
2. REMOVE FR WIPER ARM RH
(a) Operate the wiper and stop the windshield wiper motor assy at the automatic stop position.
(b) Remove a nut and FR wiper arm RH.
3. REMOVE FR WIPER ARM LH
(a) Remove a nut and FR wiper arm LH.
4. REMOVE HOOD TO COWL TOP SEAL
(a) Using a clipremover, disengage the meshing of 8 clips
and remove the hood to cowl top seal.
66071–01
Claws
Claws
E60623
5. REMOVE COWL TOP VENTILATOR LOUVER RH
(a) Remove a clip and release the 5 claws, and remove the
cowl top ventilator louver RH.
E60624
6. REMOVE COWL TOP VENTILATOR LOUVER LH
(a) Remove a clip and release the 5 claws, and remove the
cowl top ventilator louver LH.
E60625
2004 COROLLA (RM1037U)
1706Author: Date:
E60708
66–7
–WIPER & WASHER WINDSHIELD WIPER MOTOR ASSY
7. REMOVE WIPER LINK ASSY
(a) Disconnect the connector.
(b) Remove the 2 bolts.
(c) Slide the wiper link assy to vehicle’s passengers side. Dis-
engage the meshing of the rubber pin and remove the
wiper link assy.
8. REMOVE WINDSHIELD WIPER MOTOR ASSY
(a) Using a screwdriver and disengage the meshing of 2 rods
at the clank arm pivot of the windshield wiper motor assy.
HINT:
Tape the screwdriver tip before use.
E50396
E50397
E50398
(b) Remove 2 torx bolts and windshield wiper motor assy.
2004 COROLLA (RM1037U)
1707Author: Date: