![](/html/b3/b3ed/b3ed91123736443a8489edb44edc42f954baf0454e54d5a4664dc4124feb6842/bg1.png)
–LIGHTING LH HEADLAMP ASSY
REPLACEMENT
HINT:
COMPONENTS: See page 65–12
1. REMOVE RADIATOR GRILLE SUB–ASSY(See page 76–2 )
2. REMOVE FRONT BUMPER COVER(See page 76–2)
3. REMOVE LH HEADLAMP ASSY
65–13
650GS–01
Claw
E60619
E60621
(a) Remove the 3
bolts.
(b) Pull out the headlight assy LH forward, then disconnect
the bracket of body side.
(c) Release the claws and disconnect the connectors as
shown in the illustration, and remove the headlight assy
LH.
4. INSTALL RETAINER, HEADLAMP PROTECTOR, UPR
LH
HINT:
When only the installation part of the headlight assy LH is damaged, it can be repaired inexpensively by using a headlight protector retainer UPR LH. In this case, however, the headlight
assy LH itself should not be damaged.
2004 COROLLA (RM1037U)
(a) Cut off the part shaded in the illustration and sand smooth
with sandpaper.
NOTICE:
After cutting off the part roughly, place the headlight protector retainer UPR LH against the bosses and gradually
file any interfering part until the proper condition for installation is made.
E60463
1690Author: Date:
![](/html/b3/b3ed/b3ed91123736443a8489edb44edc42f954baf0454e54d5a4664dc4124feb6842/bg2.png)
65–14
2mm
–LIGHTING LH HEADLAMP ASSY
(b) Install the headlight protector retainer UPR LH with 2
screws.
E60464
5. INSTALL RETAINER, HEADLAMP PROTECTOR, LWR
LH
(a) Cut off the part shaded in the illustration and sand smooth
with sandpaper.
NOTICE:
After cutting off the part roughly, place the headlight protector retainer LWR LH against the bosses and gradually
file any interfering part until the proper condition for installation is made.
E60465
(b) Install the headlight protector retainer LWR LH with a
screw.
E60466
6. PUT VEHICLE THESE CONDITIONS(See page 65–18 )
7. ADJUST FOG LIGHT AIM(See page 65–18)
8. HEADLIGHT AIM ONLY(See page 65–15)
2004 COROLLA (RM1037U)
1691Author: Date: