Toyota Corolla 2004 Repair Manual - FRONT SEAT AIRBAG ASSY RH
60–32
–SUPPLEMENTAL RESTRAINT SYSTEM FRONT SEAT AIRBAG ASSY RH
FRONT SEAT AIRBAG ASSY RH
6007P–03
DISPOSAL
HINT:
When scrapping vehicles equipped with an SRS or disposing of the front seat airbag assy always first
deploy the airbag in accordance with the procedure described below. If any abnormality occurs with
the airbag deployment, contact the SERVICE DEPT. of TOYOTA MOTOR SALES, U.S.A., INC.
When disposing of a front seat airbag assy with an airbag deployed in a collision, follow the same pro-
cedure given in step 1–(e) in ”DISPOSAL”.
CAUTION:
Never dispose of a front seat airbag assy which has
an undeployed airbag.
The airbag produces a sizeable exploding sound
when it deploys, so perform the operation out of
doors and where it will not create a nuisance to
nearby residents.
SST
SST
Battery
H40004
When deploying the airbag, always use the specified
SST (SRS Airbag Deployment Tool), perform the
operation in a place away from electrical noise.
When deploying an airbag, perform the operation at
least 10 m (33 ft) away from the airbag assy.
The front seat airbag assy is very hot when the airbag
is deployed, so leave it alone for at least 30 minutes
after deployment.
Use gloves and safety glasses when handling front
seat airbag assy with the deployed airbag.
Always wash your hands with water after completing
the operation.
Do not apply water, etc. to a front seat airbag assy
with the deployed airbag.
1. DISPOSE FRONT SEAT AIRBAG ASSY RH (WHEN
SCRAPPING VEHICLE DEPLOYMENT METHOD)
HINT:
Prepare a battery for the power source to deploy the airbag.
(a) Check the function of SST (See step 1–(a) on page
60–14).
2004 COROLLA (RM1037U)
H40005
1646Author: Date:
Battery
60–33
–SUPPLEMENTAL RESTRAINT SYSTEM FRONT SEAT AIRBAG ASSY RH
(b) Disconnect the front seat airbag assy connector.
NOTICE:
When handling the airbag connector, take care not to
damage the airbag wire harness.
H41647
(c) Set SST.
(1) Connect the connectors of the 2 SST to the front
seat airbag assy connector.
SST 09082–00700, 09082–00750
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
SST
10 m (33 ft) or more
2004 COROLLA (RM1037U)
H41648
H40007
(2) Move the SST at least 10 m (33 ft) away from the
front of the vehicle.
(3) Close all the doors and windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(4) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(–) terminal.
(d) Deploy the airbag.
(1) Check that no one is inside the vehicle or within 10
m (33 ft) area around the vehicle.
(2) Press the SST activation switch and deploy the air-
bag.
HINT:
The airbag deploys simultaneously when the LED of SST activation switch lights up.
(e) Dispose of the front seat airbag assy.
CAUTION:
The front seat airbag assy is very hot when the airbag
is deployed, so leave it for at least 30 minutes after deployment.
Use gloves and safety glasses when handling a front
seat airbag assy with the deployed airbag.
Do not apply water, etc. to a front seat airbag assy
with the deployed airbag.
Always wash your hands with water after completing
the operation.
HINT:
When scrapping a vehicle, deploy the airbag and scrap the vehicle with the front seat airbag assy being installed.
1647Author: Date:
Loading...