Toyota Corolla 2004 Repair Manual - AIR BAG SENSOR ASSY CENTER

60–38

–SUPPLEMENTAL RESTRAINT SYSTEM AIR BAG SENSOR ASSY CENTER

REPLACEMENT

HINT:
COMPONENTS: See page 60–37

1. PRECAUTION (See page 60–1)

2. DISCONNECT BATTERY NEGATIVE TERMINAL (See page 60–1 )

3. REMOVE PARKING BRAKE HOLE COVER SUB–ASSY (See page 71–10)

4. REMOVE FLOOR SHIFT SHIFT LEVER KNOB SUB–ASSY (M/T TRANSAXLE)
(See page 71–10)

5. REMOVE SHIFTING HOLE COVER SUB–ASSY (M/T TRANSAXLE) (See page 71–10)

6. REMOVE CONSOLE PANEL UPPER (See page 71–10)

7. REMOVE CONSOLE BOX CARPET (See page 71–10)

8. REMOVE RR CONSOLE BOX (See page 71–10)

9. REMOVE AIR BAG SENSOR ASSY CENTER

(a) Disconnect the 3 connectors from the airbag sensor assy

center.

(b) Remove the 3 bolts and airbag sensor assy center.

6007R–03

C91457

10. INSPECT AIR BAG SENSOR ASSY CENTER (See page 60–8)

11. INSTALL AIR BAG SENSOR ASSY CENTER

(a) Check that the ignition switch is turned to OFF.
(b) Check that the battery negative terminal is disconnected.

NOTICE:
Do not start the operation for 90 seconds after removing the terminal.

(c) Temporarily install the airbag sensor assy center with the 3 bolts.
(d) Tighten the 3 bolts to the specified torque.

Torque: 17.5 N⋅m (178 kgf⋅cm, 13 ft⋅lbf)

(e) Connect the connector to the airbag sensor assy center.
(f) Check that no play is identified.

12. INSPECT SRS WARNING LIGHT (See page 05–424)

2004 COROLLA (RM1037U)

1652Author: Date: