41–6
–MANUAL TRANSMISSION/TRANSAXLE FLOOR SHIFT SHIFT LEVER ASSY
REPLACEMENT
HINT:
COMPONENTS: See page 41–5
1. REMOVE FLOOR SHIFT SHIFT LEVER KNOB SUB–ASSY
2. REMOVE CONSOLE PANEL UPPER (See page 71–10)
3. REMOVE PARKING BRAKE HOLE COVER SUB–ASSY (See page 71–10)
4. REMOVE CONSOLE BOX SUB–ASSY REAR (See page 71–10)
5. SEPARATE FLOOR SHIFT CABLE TRANSMISSION
CONTROL SHIFT
(a) Separate the end of the shift cable from the shift lever
assy.
4107B–01
Cable Outer
Spring
D26974
(b) Using a screwdriver, release the cable outer spring.
(c) Turn the lock, separate the shift cable from the shift lever
retainer.
Lock
D26973
6. SEPARATE FLOOR SHIFT CABLE TRANSMISSION
CONTROL SELECT
(a) Separate the end of the select cable from the shift lever
assy.
D26976
2004 COROLLA (RM1037U)
(b) Using a screwdriver, release the cable outer spring.
(c) Turn the lock, separate the select cable from the shift le-
ver retainer.
Cable Outer
spring
Lock
D26975
1406Author: Date:
D26889
41–7
–MANUAL TRANSMISSION/TRANSAXLE FLOOR SHIFT SHIFT LEVER ASSY
7. REMOVE FLOOR SHIFT SHIFT LEVER ASSY
(a) Remove the 4 bolts and shift lever assy.
8. INSTALL FLOOR SHIFT SHIFT LEVER ASSY
(a) Install the shift lever assy with the 4 bolts.
Torque: 12 N⋅m (120 kgf⋅cm, 9 ft⋅lbf)
Cable Outer
spring
Lock
D26889
D26915
9. CONNECT FLOOR SHIFT CABLE TRANSMISSION
CONTROL SHIFT
(a) Connect the shift cable to the retainer of shift lever assy,
turn the lock.
NOTICE:
The projecting part of the lock should face upward when
the shift cable is installed.
(b) Install the cable outer spring to the lock.
NOTICE:
Make sure that after installation the cable outer spring is
moved to the place shown in the illustration.
(c) Connect the end of the shift cable to the shift lever assy.
2004 COROLLA (RM1037U)
D26974
1407Author: Date: