Toyota Corolla 2004 Repair Manual - FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT

41–12
MANUAL TRANSMISSION/TRANSAXLE FLOOR SHIFT CABLE TRANSMISSION CONTROL
FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT
41079–02
REPLACEMENT
HINT: COMPONENTS: See page 41–5
1. REMOVE AIR CONDITIONER UNIT ASSY (See page 55–17)
HINT: Refer to the instructions for removal of the air conditioner unit assy.
2. SEPARATE AIR BAG SENSOR ASSY CENTER
(a) Remove the 3 bolts, separate the airbag sensor assy center.
3. REMOVE EXHAUST PIPE ASSY (See page 15–2)
4. REMOVE FRONT FLOOR HEAT INSULATOR NO.1
(a) Remove the 3 nuts and heat insulator No.1.
5. REMOVE FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT
(a) Remove the clip and washer, separate the top of the se-
lect cable from the transaxle.
(b) Remove the clip, separate the select cable from the con-
trol cable bracket.
Cable Outer Spring
Lock
D26968
(c) Remove the 2 nuts and clamp.
B53753
(d) Using a screwdriver, release the cable outer spring. (e) Turn the lock, separate the select cable from the shift le-
ver retainer.
D26975
2004 COROLLA (RM1037U)
1412Author: Date:
D26976
MANUAL TRANSMISSION/TRANSAXLE FLOOR SHIFT CABLE TRANSMISSION CONTROL
41–13
(f) Separate the end of the select cable from the shift lever
assy.
(g) Remove the 2 bolts and retainer from the floor. (h) Pull out the control cable assy from the floor.
D26966
B53750
B53750
(i) Remove the retainer from the grommet. (j) Remove the select cable from the grommet.
6. INSTALL FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT
(a) Install the select cable to the grommet. (b) Install the retainer to the grommet.
NOTICE: Fit 4 projections of the grommet into 4 holes of the retainer.
2004 COROLLA (RM1037U)
(c) Install the control cable assy with the 2 bolts.
Torque: 5.0 Nm (51 kgfcm, 44 in.⋅lbf)
D26966
1413Author: Date:
Loading...
+ 1 hidden pages