Toyota Corolla 2004 Repair Manual - FRONT DIFFERENTIAL OIL SEAL

40–28
AUTOMA TIC TRANSMISSION / TRANS FRONT DIFFERENTIAL OIL SEAL (ATM)
REPLACEMENT
1. REMOVE FRONT WHEELS
2. REMOVE ENGINE UNDER COVER RH
3. REMOVE ENGINE UNDER COVER LH
4. DRAIN AUTOMATIC TRANSAXLE FLUID
(a) Remove the drain plug, gasket and drain ATF. (b) Install a new gasket and drain plug.
Torque: 17.5 Nm (178 kgfcm, 13 ft⋅lbf)
5. REMOVE FRONT DRIVE SHAFT ASSY RH (See page 30–6)
6. REMOVE FRONT DRIVE SHAFT ASSY LH (See page 30–6)
400LP–02
SST
SST
SST
7. REMOVE TRANSAXLE HOUSING OIL SEAL(RH)
(a) Using SST, pull out the oil seal.
SST 09308–00010
D25133
8. REMOVE TRANSAXLE CASE OIL SEAL(LH)
(a) Using SST, pull out the oil seal.
SST 09308–00010
Z02840
9. INSTALL TRANSAXLE HOUSING OIL SEAL(RH)
(a) Using SST and a hammer, drive in a new oil seal.
SST 09350–32014 (09351–32130, 09351–32150)
Oil seal drive in depth:
2.0 0.5 mm (0.079 0.020 in.)
(b) Coat the lip of the oil seal with MP grease.
2004 COROLLA (RM1037U)
D25134
1378Author: Date:
AUTOMATIC TRANSMISSION / TRANS FRONT DIFFERENTIAL OIL SEAL (ATM)
10. INSTALL TRANSAXLE CASE OIL SEAL(LH)
(a) Using SST and a hammer, drive in a new oil seal.
SST 09350–32014 (09351–32111, 09351–32130)
Oil seal drive in depth:
5.3 0.5 mm (0.209 0.020 in.)
SST
Z02841
(b) Coat the lip of the oil seal with MP grease.
11. INSTALL FRONT DRIVE SHAFT ASSY LH (See page 30–6)
12. INSTALL FRONT DRIVE SHAFT ASSY RH (See page 30–6)
13. INSTALL ENGINE UNDER COVER LH
14. INSTALL ENGINE UNDER COVER RH
15. INSTALL FRONT WHEELS
Torque: 103 Nm (1050 kgfcm, 76 ft⋅lbf)
16. ADD AUTOMATIC TRANSAXLE FLUID
17. INSPECT AUTOMATIC TRANSAXLE FLUID (See page 40–2 )
18. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT (See page 26–5)
19. CHECK ABS SPEED SENSOR SIGNAL (W/ ABS) (See page 05–297)
40–29
2004 COROLLA (RM1037U)
1379Author: Date:
Loading...