Toyota Corolla 2004 Repair Manual - PARKING BRAKE LEVER SUB–ASSY

33–4

–PARKING BRAKE PARKING BRAKE LEVER SUB–ASSY

REPLACEMENT

1. REMOVE CONSOLE BOX SUB–ASSY REAR (See page 71–10)

2. REMOVE PARKING BRAKE LEVER SUB–ASSY

(a) Disconnect the parking brake switch connector from the

parking brake switch.

(b) Remove the lock nut and adjusting nut from the parking

brake cable assy No.1.

F41837

(c) Remove the 2 bolts.

3307E–01

F41838

F42264

F41840

(d) Using a screwdriver, raise the pick on the parking brake

lever, and remove the parking brake cable assy No.1 from
the parking brake lever.

(e) Remove the parking brake lever from the body.

3. REMOVE PARKING BRAKE SWITCH ASSY

(a) Remove the screw and parking brake switch assy.

2004 COROLLA (RM1037U)

1342Author: Date:

F41840

33–5

–PARKING BRAKE PARKING BRAKE LEVER SUB–ASSY

4. INSTALL PARKING BRAKE SWITCH ASSY

(a) Install the parking brake switch to the parking brake lever

sub–assy with the screw.

5. INSTALL PARKING BRAKE LEVER SUB–ASSY

(a) Install the parking brake cable assy No.1 to the parking

brake lever, temporarily tighten the adjusting nut and lock
nut.

(b) Using a screwdriver, fix the parking brake cable No.1 to

the pick.

F41841

F41838

F41837

(c) Install the parking brake lever with the 2 bolts.

Torque: 12.5 N⋅m (130 kgf⋅cm, 9 ft⋅lbf)

(d) Connect the parking brake switch connector to the park-

ing brake switch.

6. INSPECT PARKING BRAKE LEVER TRAVEL (See page 33–2)

7. ADJUST PARKING BRAKE LEVER TRAVEL (See page 33–2 )

8. INSTALL CONSOLE BOX SUB–ASSY REAR

2004 COROLLA (RM1037U)

1343Author: Date: