Toyota Corolla 2004 Repair Manual - PARKING BRAKE CABLE ASSY NO.1

–PARKING BRAKE PARKING BRAKE CABLE ASSY NO.1

REPLACEMENT

1. REMOVE CONSOLE BOX SUB–ASSY REAR (See page 71–10)

2. REMOVE PARKING BRAKE LEVER SUB–ASSY (See page 33–4)

3. REMOVE EXHAUST PIPE ASSY FRONT (See page 15–2)

4. REMOVE FRONT FLOOR HEAT INSULATOR NO.1

(a) Remove the 3 nuts and front floor insulator No.1.

F42140

5. REMOVE FRONT FLOOR HEAT INSULATOR NO.2

(a) Remove the 2 nuts and front floor insulator No.2.

33–7

3307G–01

F42141

6. REMOVE PARKING BRAKE CABLE ASSY NO.1

(a) Disconnect the parking brake cable assy No.1 from the equalizer and remove the parking brake cable

assy No.1.

7. INSTALL PARKING BRAKE CABLE ASSY NO.1

(a) Connect the parking brake cable assy No.1 to the equalizer and install the parking brake cable assy

No.1.

8. INSTALL FRONT FLOOR HEAT INSULATOR NO.2

(a) Install the front floor insulator No.2 with the 2 nuts.

Torque: 5.5 N⋅m (55 kgf⋅cm, 48 in.⋅lbf)

F42141

2004 COROLLA (RM1037U)

1345Author: Date:

33–8

–PARKING BRAKE PARKING BRAKE CABLE ASSY NO.1

9. INSTALL FRONT FLOOR HEAT INSULATOR NO.1

(a) Install the front floor insulator No.1 with the 3 nuts.

Torque: 5.5 N⋅m (55 kgf⋅cm, 48 in.⋅lbf)

F42140

10. INSTALL EXHAUST PIPE ASSY FRONT (See page 15–2)

11. INSTALL PARKING BRAKE LEVER SUB–ASSY (See page 33–4)

12. INSPECT PARKING BRAKE LEVER TRAVEL (See page 33–2)

13. ADJUST PARKING BRAKE LEVER TRAVEL (See page 33–2)

14. INSTALL CONSOLE BOX SUB–ASSY REAR

2004 COROLLA (RM1037U)

1346Author: Date: