Toyota Corolla 2004 Repair Manual - FRONT AXLE LH HUB BOLT

30–22

–DRIVE SHAFT / PROPELLER SHAFT FRONT AXLE LH HUB BOLT

FRONT AXLE LH HUB BOLT

REPLACEMENT

HINT:
COMPONENTS: See page 30–16

1. REMOVE FRONT WHEEL

2. SEPARATE FRONT DISC BRAKE CALIPER ASSY LH (See page 30–17)

3. REMOVE FRONT DISC

4. REMOVE FRONT AXLE LH HUB BOLT

(a) Using SST and a hammer handle or an equivalent, re-

move the LH hub bolt.

SST

Hold

SST 09628–10011

300A5–02

Turn

D27405

5. INSTALL FRONT AXLE LH HUB BOLT

Washer

Nut

(a) Install a washer and nut to a new LH hub bolt as shown

in the illustllation.

(b) Using a hammer handle or an equivalent to hold the hub

sub–assy LH, install t h e L H hub bolt by tightening the nut.

Hold

Turn

D27401

6. INSTALL FRONT DISC

7. INSTALL FRONT DISC BRAKE CALIPER ASSY LH (See page 30–17)

8. INSTALL FRONT WHEEL

Torque: 103 N⋅m (1,050 kgf⋅cm, 76 ft⋅lbf)

2004 COROLLA (RM1037U)

1287Author: Date: