WHEEL AND TIRE SYSTEM
INSPECTION
1. INSPECT TIRE
(a) Check the tires for wear and proper inflation pressure.
Cold tire inflation pressure:
(b) Using a dial indicator, check the tire runout.
–TIRE & WHEEL WHEEL AND TIRE SYSTEM
Tire size
P185/65R15 86S
P195/65R15 89S
P195/65R15 89H
Front Rear
kPa (kgf⋅cm2, psi)
210 (2.1, 30)
Tire runout: 3.0 mm (0.118 in.) or less
28–1
28027–01
Front
C50798
2. ROTATE TIRE
HINT:
See the illustration for where to rotate each tire when you include the spare tire in the rotation and when you do not.
F13676
3. INSPECT WHEEL BALANCE
(a) Check and adjust the Off–the–car balance.
(b) If necessary, check and adjust the On–the–car balance.
Imbalance after adjustment: 8.0 g (0.018 lb) or less
C80976
4. INSPECT BEARING BACKLASH(See page 30–2)
5. INSPECT AXLE HUB DEVIATION(See page 30–2)
2004 COROLLA (RM1037U)
1265Author: Date: