
11–10
–FUEL FUEL INJECTOR ASSY
REPLACEMENT
1. WORK FOR PREVENTING GASOLINE FROM SPILLING OUT (See page 11–1)
2. REMOVE CYLINDER HEAD COVER NO.2
(a) Remove the 2 nuts, 2 clips and cylinder head cover.
A65077
3. DISCONNECT VENTILATION HOSE
(a) Disconnect the ventilation hose from the cylinder head
cover.
110FJ–01
A65078
A65079
A65080
4. DISCONNECT ENGINE WIRE
(a) Disconnect the 4 fuel injector connectors.
(b) Remove the 3 wire harness clamps from the clamp brack-
ets.
5. REMOVE EFI FUEL PIPE CLAMP
(a) Remove the EFI fuel pipe clamp.
2004 COROLLA (RM1037U)
977Author: Date:

Turn
Insert
Retainer
(at 4 places)
SST
A65081
11–11
–FUEL FUEL INJECTOR ASSY
6. DISCONNECT FUEL TUBE SUB–ASSY
(a) Using a SST, disconnect the fuel tube.
SST 09268–21010
(1) Assemble the SST to the connection as shown.
(2) Turn the SST, align the retainers inside the connec-
tor with the SST chamfered parts and insert the SST
into the connector.
(3) Slide the SST and the connector together towards
the fuel tube assembly.
NOTICE:
Check if there is dirt mud on the pipe and around the
connector before disconnecting them and clean the
dirt away.
Do not bent, fold and rotate the nylon tube.
When the connector and the pipe are stuck, push and
pull the connector to free to disconnect and pull it out.
Prevent the disconnected pipe and connector from
damaging and mixing foreign objects by covering
them with a vinyl bag.
Pipe
Retainer
Housing
O–ring
Nylon Tube
A65082
7. REMOVE FUEL DELIVERY PIPE SUB–ASSY
(a) Remove the 3 bolts and fuel delivery pipe together with
the 4 fuel injectors.
NOTICE:
Be careful not to drop the fuel injectors when removing the
fuel delivery pipe.
A65083
(b) Remove the 2 spacers from the cylinder head.
2004 COROLLA (RM1037U)
A65084
978Author: Date: