2014.5 CAMRY
Table of contents
Loading...
2014
Camry
Navigation System with
Entune® App Suite
Quick Reference Guide
TABLE OF CONTENTS
OVERVIEW 2
Limitations of the Quick Reference Guide 2
Basic Operation 2
CONNECT A BLUETOOTH PHONE 3
CALLING BY VOICE RECOGNITION 4
Dial by Number 4
Dial by Name 5
DESTINATION INPUT 6
By Address 6
Note on Voice Recognition 8
Tips for Using Voice Recognition 8
By Address - Voice Recognition 8
DESTINATION INPUT - POINT OF INTEREST (POI) 10
Point of Interest by Name 10
Point of Interest by Category 11
Point of Interest by Category - Voice Recognition 12
SET HOME 13
ADDITIONAL NAVIGATION FEATURES 15
Operation of Emergency Screen 15
Search Area 15
Route Preferences 15
3 Routes 15
Screen Configurations 15
Beep Setting 16
Voice Volume 16
Language 16
System time 16
Auto Screen Change 16
Estimated Distance and Time 16
NAVTRAFFIC 17
Show Navtraffic Information 17
Automatically Avoid Traffic 18
Traffic Incident Warning 18
Show Free Flowing Traffic 19
NAVWEATHER, SPORTS, STOCKS AND FUEL 20
ENTUNE® APP SUITE - INTRODUCTION 21
What is Entune App Suite? 21
Entune App Suite 21
Phone Compatibility 22
ENTUNE APP SUITE - HOW TO GET STARTED 23
Basic Overview 23
ENTUNE APP SUITE - NEW CUSTOMER REGISTRATION 24
Account Creation 24
Downloading Entune App Suite to Your Phone 24
Launch App 24
Connect Phone 24
Accessing Entune App Suite 24
OVERVIEW
LIMITATIONS OF THE QUICK REFERENCE GUIDE
The Quick Reference Guide is designed to provide information on the basic operation and key
features of the navigation system and Entune® App Suite (apps and data services). The Quick
Reference Guide is not intended as a substitute for the Navigation Owner’s Manual. We strongly
encourage you to review the Navigation Owner’s Manual, the quick reference guide and visit
www.toyota.com/entune so you will have a better understanding of all your vehicle(s) features and
controls.
BASIC OPERATION
1
NORTH-UP OR COMPASS MODE Icon
1
Touch to change the map display between
North-up or Head-up perspectives.
2
ZOOM IN/ZOOM OUT Icons
Touch to magnify or reduce the map
scale.
3
SETUP Button
Adjust preferences for: general settings,
voice, navigation, vehicle maintenance,
phone, bluetooth, and audio.
4
INFO/APPS Button
Access APPS, fuel consumption, trafc,
fuel prices, sports, stocks, weather, and
map data.
7
2
5
DESTINATION Button
Input the destination by one of several
methods.
6
MAP/VOICE Button
Repeat the last voice guidance prompt,
cancel the map scrolling feature, or display
the current position.
7
CURRENT VEHICLE POSITION Mark
Indicates the current position of the vehicle
and its directional heading.
6
5
4
3
1
2
CONNECT A BLUETOOTH PHONE
6
If you are able to successfully transfer your phone book, you can dial by name using voice recognition.
Please say the name exactly as it is entered in your phone when in the telephone screen. If you have
difficulty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone
manufacturer's user guide.
CALLING BY VOICE RECOGNITION
DIAL BY NUMBER
step
step
Quick Tip - Up to five Bluetooth cell phones can be
paired. However, only one Bluetooth cell phone can
be used at a time.
Press
1
by
Bluetooth feature on the phone is ON
and is in discoverable mode.
Upon connection, the system will
indicate that the pairing process was
3
successful.
on the faceplate followed
. Verify that the
step
If necessary, input the passkey listed on
the screen into the approved Bluetooth
2
cell phone. Please refer to the cell
phone manufacturer’s user guide for
pairing procedures.
step
Quick Tip - If you know your next command, you
can press
Speak your command after the beep.
step
phones may or may not show battery or signal strength
on the display.
Quick Tip - It is recommended that you
reduce background noise prior to using the Voice
Recognition system. Conversation, high fan speed,
wind noise (open windows), etc., may prevent the
voice recognition system from understanding your
commands.
Press on the steering wheel. After
1
the beep say, “Use the Phone.”
at any time to interrupt the prompt.
After the beep, say “Dial” or press
3
on the steering wheel.
Some Bluetooth® equipped cell
step
Quick Tip - You can skip Step 1 and say Dial
commands immediately from the Shortcut Menu.
step
After the beep say, “Dial <number>.”
Say the phone number digits
2
individually, without pausing (e.g. “Dial
Three, one, zero, four…”).
Call is active when
4
indicated. To end call, press
on the screen or
wheel.
on the steering
is
3
4
CALLING BY VOICE RECOGNITION
DIAL BY NAME
If you are able to successfully transfer your phone book, you can dial by name using voice recognition.
Please say the name exactly as it is entered in your phone when in the telephone screen. If you have
difficulty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone
manufacturer's user guide.
DESTINATION INPUT
BY ADDRESS
step
Quick Tip - If you know your next command, you
can press
Speak your command after the beep.
step
Press
1
the beep say, “Use the Phone.”
at any time to interrupt the prompt.
After the beep, say “Dial” or press
3
on the steering wheel. After
on the steering wheel.
step
Quick Tip - You can skip Step 1 and say Dial
commands immediately from the Shortcut Menu.
step
After the beep say, “Call <name>.”
Please say the name exactly as it is
2
entered in your phone.
Call is active when is
4
indicated. To end call, press
on the screen or
wheel.
on the steering
DEST
step
step
Press
1
by .
Select the desired State/Province.
3
on the faceplate followed
step
step
Touch
step 4. To change State/Province, touch
2
Input the city name.
4
and move to
and move to step 3.
step
5
Touch the desired city name. Input the street name and touch
5
step
6
Quick Tip - Enter the street name without prefixes
such as North or the letter N. The system will display
the base street name without prefixes or suffixes on
the next screen.
.
6
DESTINATION INPUT
BY ADDRESS
DESTINATION INPUT
NOTE ON VOICE RECOGNITION
The navigation system's voice recognition feature will compare your spoken words with
computer-generated word patterns preprogrammed in the database. If the system does not
provide your intended match, please try a different pronunciation. Voice-activation names are
not available for every street and city.
step
step
Touch the desired street name.
7
Touch
9
step
.
step
Input the house number and touch
8
.
Touch
10
followed by
.
TIPS FOR USING VOICE RECOGNITION
tip
tip
tip
BY ADDRESS-VOICE RECOGNITION
A large TALK icon
1
NAV screen to signal when to speak your
command.
Before using voice recognition, roll up all
windows and set the climate control fan on
3
low or off to reduce background noise in
the cabin.
Streets should be spoken without prefixes or
5
suffixes. Street names should be spoken as
in these examples:
1st Street, say: "First"
E 15th Street, say" "Fifteenth"
190th Street, say "One hundred ninetieth"
Point Court, say "Point"
will illuminate on the
tip
tip
tip
Have the full and correct address in mind.
The system will ask for the state, city, and
2
street name followed by the house number
as separate inputs.
Speak at a normal volume and pace, and
pronounce words clearly.
4
Say a street address number as single
digits. Examples:
6
125, say: “One two five”
2000, say: “Two zero zero zero”
32307, say: “Three two three zero
seven”
step
7
11
Select the desired Route
Preferences and touch to
confirm selection. See page 15 for
route selection.
step
12
Touch to start route
guidance.
step
Quick Tip - If you know your next command, you
can press
Speak your command after the beep.
Press on the steering wheel. After
1
the beep say, “Enter an Address.”
at any time to interrupt the prompt.
step
After the beep say the city name or,
2
"Change state" to search in another
state.
8
Loading...