TOYO ELECTRIC MFG TY T7 User Manual

Referenced Qualified Design ID(s): 53438

Devices required and included:

Devices Required:

Downloading the Application “Holiday Brilliant”

Device Operation System Requirement

Operating Instructions – Application

Product Function:

General Product Use for
Spectacular Light & Sound Show

App instruction

Base Controller with Music Card Slot and Bluetooth speaker
w/ Ground Stake and Hanging Hook

Apple users can download the APP “Holiday Brilliant” from Apple store.

Pair your device with the Base Controller.

After successful pairing, click on the Application logo “Holiday Brilliant”
in your device to enter the program.

Android users can download the APP “Holiday Brilliant” from Google Play.

This product requires use of smart phone, tablet, or other BT enabled devices.
APP can be downloaded to your smart phone.

APP name: Holiday Brilliant

Android: 4.3 or higher

IOS: 7.0 or higher

Using the 16 pre-programmed lighting functions

Note: The application must be downloaded and installed into your device
before proceeding. See Downloading the Application for instructions.

APP icon:The Spectacular Light & Sound Show enables the user to plug in lights,
trees and yard decor, connect your favorite holiday music and select
from 16 Functions to create your very own Light & Sound Show.

The Base Controller sends out a RF signal to the Satellite Receivers. This
enables the Satellite Receivers to "follow" the Base Controller function.
The function is controlled by the mobile phone or tablet through the
application software installed in mobile phone or tablet. The base
controller and mobile phone / tablet are connected by Bluetooth.

Whether you have lights, trees or yard decor plugged into the Base
Controller and Satellite Receivers, all the items plugged in will perform
the same function selected on the Remote.

Enjoy the lights with wireless music. Set up your decorations to create

your own Holiday Light & Sound Show。

3 Satellite Receivers w/ Hanging Hook

1.

Lights On/Off Button:
Press this button to turn
on/off your lighting strings.

Function Selector: The

2.
function selector allows you
to scroll through and select
the desired function.

▪ Combination

▪ Flash 1 Directional

▪ Flash 2 Directional

▪ Random Fade

▪ Stacking Flash

▪ Flash & Chase

▪ Random Flashing

▪ Bi-Directional Pulsing

▪ Bi-Directional Chasing

▪ Pulsing

▪ Sequential Flashing

▪ Progressive Strobing

▪ Bi-Directional Strobing

▪ Fade in & out

▪ Steady Burn

▪Music Sensor (This is the music and light synchronization mode. If you are not

playing music while in sensor mode, the light will stay steady.)

3.

Brightness Selector Buttons: These two buttons allow you to adjust the
brightness of the lights that are plugged into the speaker. Push either the top
button (increase) or bottom button (decrease). The brightness can be adjusted
from “0” (off) to 100 (brightest). The current brightness setting will be
displayed (0—100) between the top and bottom brightness selector buttons.

Note: The Brightness Selector does not work when in “Sensor Mode”
& “Fade in & out”.

Speed Selector Buttons: These two buttons allow you to adjust the speed

4.
of the currently selected function. Push either the top button (increase) or
bottom button (decrease). Note: The speed selection will not have any
effect on the “steady” function (which is one of the 16 preprogrammed
functions) or the “sensor” function (music & lights synchronization mode).
The speed rate can be adjusted from “0” (slowest setting) to “100”
(fastest setting). The current speed setting (0—100) will be displayed between
the top and bottom speed selector buttons.

Music Button: Press this button to enter Music Playlist. 5.
For IOS users:

For Android users:

**Note**: Music playing will not be affected by selecting any of the
pre-programmed modes.The lights will flash in sync with the music rhythm
only in "Sensor Mode".Under "Sensor Mode", to have the best performance,
don't set the device into “Mute”, set the ring volume at highest and sound
volume at least 40%; and the lights will flash according to the rhythm of
different music. The default mode of lighting is "Combination".