TOYO ELECTRIC MFG TY S 002 User Manual

SKU NO.: 1001378629

MODEL # TY-S-002

Package Contents

USER MANUAL

Music Box

Indoor Bluetooth Speaker (with power cord)

Referenced Qualified Design ID(s): 53438

1

1Instruction Manual

IMPORTANT SAFETY
INSTRUCTIONS

When using electrical products, basic precautions
should always be followed including the following:

a)

READ AND FOLLOW
ALL SAFETY
INSTRUCTIONS.

b) Do not use this seasonal product outdoors. This
product is intended for Indoor Use or Covered
Outdoor Use (i.e. Patio, Covered Entry, Covered
Porch, etc.)
c) This seasonal use product is not intended for
permanent installation or use.
d) Do not mount or place near gas or electric heaters,
fireplace, candles or other similar sources of heat.
e) Do not secure the wiring of the product with staples
or nails, or place on sharp hooks or nails.
f)

Do not let lamps rest on the supply cord or on any wire.
g) It is best to unplug the product when leaving the
house, when retiring for the night or if the product
will be left unattended for an extended period of time.
h) This is an electric product-not a toy! To avoid the
risk of fire, burns, personal injury, and electric shock
it should not be played with or placed where small
children can reach it.
i)

Do not use this product for other than its intended use.
j)

Do not hang ornaments or other objects form the cord,

2

wire or light strings or lighting outfits attached.
k)

Do not close doors or windows on the products power cord
as this may damage the wire insulation.
l) Do not cover the product with cloth, paper or any material
not part of the product when in use.
m) This product has a polarized plug (one blade is wider than
the other) as a feature to reduce the risk of electric shock.
This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outletreverse the plug. If it still
does not fit DO NOT force it. Do not use with an extension
cord unless plug can be fully inserted. Do not alter or
replace the plug.
n) This product employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit situation. If the
fuse blows, unplug the product from the outlet. Also,
unplug any additional strings or products that may be
attached to the product. Replace the fuse as per the user
servicing instructions (follow product marking for proper
fuse rating) and check the product. If the replacement fuse
blows, a short-circuit may be present and the product
should not be used.
o) Read and follow all instructions that are on the product or
provided with the product.

SAVE THESE

p)

INSTRUCTIONS

Use and Care Instructions

a) Be sure to place the product on a stable setting when in
use. Always think safety first when plugging in lights and
lighting outfits in the product.
b) b) Before using or re-usinginspect the product carefully.

3

Do not use any products that have cut, damagedor frayed
wire insulation on cords, cracks in the lampholders or
enclosures, loose connections or exposed copper wire.
c) When storing the product, carefully remove the product
from wherever it is placed. Try to avoid any undue strain
or stress on the product power cord, connections and wires.
d) When not in use, store neatly in a cool, dry location
protected from sunlight.

User Servicing Instructions
Replace the fuse

5A fuse

CAUTION:Ensure the product is disconnected from

the power source before attempting to service. Use only
approved fuses. Do not replace the attachment plug as it
contains a safety device (fuse) that should not be removed.
a) Grasp the plug and remove it from the receptacle or other
outlet device. Do not unplug by pulling on the cord.
b) Open fuse cover. Slide open fuse access cover on top of
attachment plug towards blades.
c) Remove fuse carefully.
d) Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse
(provided with product).

4

e) Close fuse cover. Slide close the fuse access cover on top
of attachment plug.
f) Risk of fire. Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed. Discard
product if the attachment plug is damaged.

CAUTION:

1.To reduce the risk of fire and electric shock: a) Do not
mount or support the product or attached lighting strings
or lighting outfits in a manner that can cut or damage
wire insulation.
Model No. TY-S-002

FCC / Canada IC Statement:

NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant To Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

—
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.

5