Toxalert Tox-HCN-ANA User Manual

y
TOXALERT
HYDROGEN CYANIDE SENSOR MODEL TOX-HCN/ANA
FEATURES: BENEFITS:
•••• Linear 4-20mA output signal •••• Industry standard signal can be directed to most controllers.
••• Automatic low sensitivity check •••• Reliable operation and monitoring integrity.
••• Power up & calibration delays •••• False alarm avoidance.
••• Convenient diagnostics •••• Simple maintenance.
GENERAL DESCRIPTION:
The Toxalert hydrogen cyanide sensor module is designed for use in conjunction with Toxalert and other standard 4-20 mA loop controllers. The module sources an output current in proportion to the h concentration. Toxalert utilizes hydrogen cyanide sensors that are electrochemical cells. They are the self-powered, diffusion limited, metal-air battery type. The rate at which atmosphere gases can get to the electrode through a diffusion barrier is then solely dependent on concentration of gases in the atmosphere. Current is generated that is proportional to the rate of consumption of hydrogen cyanide in the cell.
Previous electrochemical sensors of this general type have used very thin plastic membranes. This results in handling and stability problems and high temperature and pressure coefficients which limit the usefulness of the device. The Toxalert sensor takes a radically different approach by allowing gas to diffuse into the sensor through a simple capillary. Not only is this extremely robust and stable, but entirely different diffusion laws apply resulting in low temperature and pressure coefficients and the capability to monitor gas as a percent volume.
drogen cyanide
1 of 2
TOXALERT INTERNATIONAL, Inc., PO Box 159, Mound, MN. 55364 PHONE: (952) 472-4541 • FAX: (952) 472-4960
www.toxalert.com
MODEL TOX-HCN/ANA
SPECIFICATIONS:
Type: Electrochemical cell-diffusion barrier type
••
•••• Range: 0 to 20 ppm hydrogen cyanide in air -20° to 50°C
•••• Response Time: 70 seconds to 90% indication •••• Relative Humidity: 15 to 90% RH non-
•••• Typical Life: Two years in normal service condensing
•••• Electrical Data:
Input Voltage: 14 – 30 vdc Output Signal: Linear 4 to 20 mA Input Power: 1.4 Watt Signal Output-Trouble: 0 mA Input Current: 40 mA @ 28 vdc Wiring: 3 wire non-isolated Loop Resistance: 800 Ohms
•••• Unit Construction: Mounting: Conduit ¾” NPT or flexible cable Physical: H: 7.6”, D: 4.6”, W: 4.2” Housing: Explosion proof (Nema 7) Weight: 2.7 pounds
(Div 1, Class 1, Groups C, D)
Gas Sensor Modules available from Toxalert include:
Ammonia (NH3) Combustible Gas Carbon Monoxide (CO) Carbon Dioxide (CO2) Chlorine (Cl2) Oxygen (O2) Hydrogen (H2) Hydrogen Chloride (HCl) Hydrogen Cyanide (HCN) Hydrogen Sulfide (H2S) Nitric Oxide (NO) Nitrogen Dioxide (NO2) Ethylene Oxide (ETO) Refrigeration And more….
Tox-HCN 2 of 2 11/97
Operating Temperature : 4° to 122°F
••
TOXALERT INTERNATIONAL, Inc., PO Box 159, Mound, MN. 55364 PHONE: (952) 472-4541 • FAX: (952) 472-4960
www.toxalert.com
Loading...