Toxalert Tox-HCI-ANA User Manual

™

TOXALERT

HYDROGEN CHLORIDE SENSOR MODEL TOX-HCl/ANA

FEATURES: BENEFITS:

•••• Linear 4-20mA output signal •••• Industry standard signal can be directed to most controllers.

•••• Automatic low sensitivity check •••• Reliable operation and monitoring integrity.

•••• Power up & calibration delays •••• False alarm avoidance.

•••• Convenient diagnostics •••• Simple maintenance.

GENERAL DESCRIPTION:

The Toxalert hydrogen chloride sensor
module is desi
Toxalert and other standard 4-20 mA loo
controllers. The module sources an output
current in
chloride concentration. Toxalert utilizes
h

ydrogen chloride sensors that are
electrochemical cells. They are the self­powered, diffusion limited, metal-air batter
t

ype. The rate at which atmosphere gases can
get to the electrode throu
barrier is then solel
concentration of
Current is
the rate of consum
in the cell.

Previous electrochemical sensors of this general type have used very thin plastic membranes.
This results in handling and stability problems and high temperature and pressure coefficients
which limit the usefulness of the device. The Toxalert sensor takes a radically different
approach by allowing gas to diffuse into the sensor through a simple capillary. Not only is this
extremely robust and stable, but entirely different diffusion laws apply resulting in low
temperature and pressure coefficients and the capability to monitor gas as a percent volume.

gned for use in conjunction with

p

proportion to the hydrogen

y

gh a diffusion

y dependent on

gases in the atmosphere.

generated that is proportional to

ption of hydrogen chloride

1 of 2

TOXALERT INTERNATIONAL, Inc., PO Box 159, Mound, MN. 55364 PHONE: [phone] • FAX: [phone]

www.toxalert.com

MODEL TOX-HCl/ANA

SPECIFICATIONS:

•••• Type: Electrochemical cell-diffusion barrier type •••• Operating Temperature : 4° to 122°F

•••• Range: 0 to 20 ppm hydrogen chloride in air -20° to 50°C

•••• Response Time: 100 seconds to 90% indication •••• Relative Humidity: 15 to 90% RH non-

•••• Typical Life: Two years in normal service condensing

•••• Electrical Data:

Input Voltage: 14 – 30 vdc Output Signal: Linear 4 to 20 mA
Input Power: 1.4 Watt Signal Output-Trouble: 0 mA
Input Current: 40 mA @ 28 vdc Wiring: 3 wire non-isolated
Loop Resistance: 800 Ohms

•••• Unit Construction:

Mounting: Conduit ¾” NPT or flexible cable Physical: H: 7.6”, D: 4.6”, W: 4.2”
Housing: Explosion proof (Nema 7) Weight: 2.7 pounds

(Div 1, Class 1, Groups C, D)

Gas Sensor Modules available from Toxalert
include:

Ammonia (NH3)
Combustible Gas
Carbon Monoxide (CO)
Carbon Dioxide (CO2)
Chlorine (Cl2)
Oxygen (O2)
Hydrogen (H2)
Hydrogen Chloride (HCl)
Hydrogen Cyanide (HCN)
Hydrogen Sulfide (H2S)
Nitric Oxide (NO)
Nitrogen Dioxide (NO2)
Ethylene Oxide (ETO)
Refrigeration
And more….

Tox-HCl 2 of 2 11/97

TOXALERT INTERNATIONAL, Inc., PO Box 159, Mound, MN. 55364 PHONE: [phone] • FAX: [phone]

www.toxalert.com