TownSteel XIC55 BLE User Manual

5

TS Smart Interconnect Lock

e-Genius 5000-BLE-55

Index

Definition ···························03

Factory Default Settings·················· 03

Important Notes······················ 04

Change Master Code····················05

Add Credential························05-06

Add a User Code

Add Multiple User Codes

Add User Keycards

Delete Code························· 07

Delete User Code

Reset to factory default settings with Master Code

System Settings······················ 08

Passage Mode

Verification Mode

Adjust Sound

Reset to Factory Default Settings············ 09

Low Battery Warning ··················· 09

2

Definition:

Credential: The Lock requires a valid credential in order to operate. A credential can be a Master Code, User Code, Keycard or Fob.
Code Length: The length of Master Code and User Codes are 6-10 digits (Master and User codes do not have to be the same length).

LED Indicator: The LED indicators are located around the Keypad of the lock. Lock flashes green LED and/or red LED dependent on

inputs. While unlocking a red LED followed by a green LED means the lock is not programmed and can be unlocked with any 6-10 digit
code or Keycard.

Master Code: The Master Code programs all User Codes and Keycards (Credentials). The factory default settings Master Code is

123456- this must be changed before programming the lock. Each lock has one Master Code. Master Code cannot be deleted.

User Code: User Codes are used to operate the lock. User Codes are programmed by the Master Code. The lock can have a maximum

of 397 User Codes.

User Keycard/Fob: Keycards or Fobs can be used to operate the lock. Master Code is used to program User Keycards/Fobs. Swipe

the Touch Keypad with the Keycard/Fob to operate the lock. The lock can have a maximum of 397 Keycards/Fobs. Any standard MIFARE

Keycard can be programmed into the lock.

Penalty Time (Anti-Tamper Lockout): To prevent unauthorized entry, the lockout feature is activated for 1 minute after 7 invalid

credential inputs have been reached. During lockout, no code or Keycard will be accepted. Penalty time is 1 minute and the red LED and

buzzer will operate repeatedly for the duration of the penalty.

Sound Indicator: The lock uses sound during programming sequences and code inputs. Factory default setting has sound on.

Factory Default Settings

Master Code: 123456
Penalty Time: 1 minute after 7 invalid code inputs
Sound Indicator Level: On
Passage Mode: Disabled
Dual Credential: Disabled

3