Town Food Service SR-24-C User Manual
TOWN FOOD SERVICE EQUIPMENT CO., INC.
72 BEADEL STREET, BROOKLYN, NY 11222
Ph. (718) 388-5650 Fax (718) 388-5860
(800) 221-5032 www.townfood.com
SR-24-C 16” CANTONESE CHAMBER WOK RANGE
GENERAL
The SR-24-C utilizes Town’s heavy duty stock pot stove
body coupled with a powerful burner to offer true Asian
cooking power in minimal space and without the need
for water cooling. A Town 3 ring burner is supplied with
this unit. Jet style burner choices are available; refer to our
burner cut sheet for selection. The unit is supplied with
Town’s exclusive clog resistant pilot. An aluminized heat
shield between the combustion chamber and outter body
insures cool operation of the unit. Delta T rated solid brass
valves with a solid metal handles are standard. The outer
body and legs are stainless steel. A rugged interior chassis,
formed from heavy duty steel angle iron is standard. Rear gas
connection, pressure regulator and a galvanized drip tray are
standard.
STANDARD FEATURES
•
Design certied by ETL for conformance to
ANSI Z83.11-2007
Design certied by NSF and /or ETL for
•
conformance to ANSI/NSF-4
Heavy duty 16” steel wok chamber, black
•
epoxy painted nish
Interior heat shield
•
Solid brass valve - Delta T rated
•
All Stainless Steel exterior construction
•
Rugged, durable angle iron chassis
•
High power 3 ring burner with two control
•
valves for maximum heat control
Clog resistant standing pilot/with control
•
valve
Stainless steel legs with bullet adjusters
•
¾” NPT rear gas connection with regulator
•
MEA and MA Plumbing Board Approved
•
MODEL
SR-24-C is available for use with either Natural or Propane
fuel. It is designed for use with 18”-20” Cantonese style
woks. It can be converted for use as a stock pot range by
purchasing a grate top.
OPTIONS
•
Volcano, shield (duck) tip ,23 tip and 32
tip jet burners are available
Custom leg height
•
Double insulated chassis
•
Castors with cross bracing
•
Stainless steel drip pan
•
Pilot gas safety system
•
Asian smallwares, such as woks, ladles and
•
shovels are available.
Rev. 0- 5/08
IMPORTANT
Commercial gas range(s) must be installed in accordance with state and local codes, or in the absence of
local code with the NATIONAL FUEL GAS CODE- ANSI Z223.1. COMPLIANCE WITH ALL CODES IS THE
RESPONSIBILITY OF THE OWNER AND THE INSTALLER.
COMMERICAL GAS UNITS NEED ADEQUATE VENTILATION SYSTEMS. REFER TO NATIONAL FIRE
PROTECTION ASSOCIATION STANDARD NO 96- “VAPOR REMOVAL FROM COOKING EQUIPMENT”
CERTIFED BY ETL TO CONFORM TO ANSI Z83.11- “GAS FOODSERVICE EQUIPMENT.”
NOT INTENDED FOR HOUSEHOLD USE. FOR USE BY PROFESSIONALLY TRAINED PERSONNEL ONLY.
CERTIFIED BY ETL/NSF TO NSF4/ANSI-4-COMMERCIAL COOKING, RETHERMALIZATION AND HOT FOOD
EQUIPMENT- “SANITATION.”
MINIMIUM CLEARANCES- COMBUSTIBLE AND NON COMBUSTIBLE:
Back Wall- 6” Left and Right Sides- 6” For use on non combustible oors only.
Town reserves the right to change design without notication.
Loading...