TowiTek DTC 10 User guide
Technical Data
TowiTek switching power supply module 230 VAC / 12 VDC
Dimensions : 50 x 51 x 20 mm
Input voltage: 230V AC
Ouptut voltage: 12V DC
maximum output current: 500 mA
ambient temperature range: 0°C .... 40°C (no condensing humidity)
Disposal after end of using life for this product
Electronic devices of all kinds must not be disposed thru regular
household waste disposal but should be turned in to a collection
point for proper recycling. Please check with your local
requirements.
Limited Warranty
This product was designed and manufactured with great care and comes with a
warranty against material or manufacturing defects at time of purchase. This
warranty is valid for 24 months starting with the day of purchase and can be claimed
with original sales receipt. The warraty of TowiTek is limited to cost free repairing or
replacement of the defective unit. Expenses and risk of transportation; compensation
for installation and de-installation and all other expenses which may be related to the
repair or exchange of this product are not refunded by TowiTek. The liability for
consequential damages resulting from the use of this product – no matter of which
exact kind – is generally ruled out.
TowiTek
switching power supply
module 230VAC / 12VDC
Nr. 19 15 94
User manual
www.conrad.com
Thank you for purchasing this product of TowiTek!
This user guide contains many important instructions on
safe and proper use of this product. The purpose of this
user guide is to make sure you always will get best
performance andan reliable operation of your new product.
PLEASE FULLY READ THIS USER GUIDE!
The handling of products operating with electric current requires you to
follow the rules from VDE such as VDE 0100, VDE0550/0551, VDE 0700,
VDE 0711 and VDE 0860 or other local rules in your country.
•
TowiTek modules are not designed and authorized for use in life support
or life saving applications! Do not use the product for applications in
which a temporary or permanent failure or malfunction could cause
damage to persons or propery.
•
If the module is used to switch currents greater 24V it is necessary to
have the installation done with no voltage applied and performed by a
trained professional authorized for such work. The module may only be
used in such application if it was installed in a safe to touch enclosure.
•
The module must only be used in dry and clean environment. The use
near water, heavy dirt and/or high humidity is dangerous and not
permitted.
•
The product must not be used in conjunction with any type of flammable
liquid or gas or other environment with risk of spark triggered
explosions.
•
Never exceed the limits or ratings listed in the 'Technical Data' section at
the end of this user guide.
•
If the module is used in schools or educational facilities or similar
institutions the operation must be supervised by trained and authorized
staff.
•
The product itself and all parts thereof (including packing material) are
not suitable toys for childern! (choking hazard, risk of electric shock, ...)
Intended use for this product
The TowiTek switching power supply module can be universally used to
provide a stabilized 12V DC voltage supply. The maximum permanent
output current is 500 mA.
The switching power supply module is highly efficient and the energy loss
at low output load is very little.
IMPORTANT NOTICE:
This switching power supply module must only be used in a dry and
clean environment. The module must be installed in a non conductive
plastic enclosure to avoid any risk of electric shock.
Connection plan
19 15 94 ENG - REV 1.00 / 12.08
The switching power supply module is designed to fit the TowiTek
universal housing with order code BN 19 12 92.
A printed sticker matching the universal housing is included with this
product.
application samples for universal housing BN 19 12 92
The manuals and documentation for our products is constantly improved
and translations to other foreign languages may become available.
Please download the latest user manual version at www.conrad.com
EU-Declaration of conformity
The company
TowiTek HK Ltd.
ROOM 1613, 16/F.
TAI YAU BUILDING
181 JOHNSTON ROAD
WANCHAI, HONG KONG
declares in their own responsibility that the product
FIND MORE PRODUCTS FROM
www.conrad.com
AVAILABLE AT
TowiTek switching power supply
module BN 19 15 94
complies to the standards
EN 55022 (EMV emission)
EN 61000-6-1 (EMV tolerance)
The above named company keeps records
with confirm the compliance to the standards
Liu Hong Quan Shenzhen 15-12-2008
(managing director)
Loading...