TourPro Lighting AQUABEAM SERIES User Manual

Please read these user manual carefully before use

USER MANUAL

www.tourprolighting.com

AQUABEAM SERIES

TourPro Lighting

Congratulations on cho osing our company product! We thank you for your custom.

◆Please not e that thi s product, as all the othe rs in the rich my company range, has

been des igned and made wit h total quality to ens ur e exce ll en t performa nce and

best mee t your exp ectations and requ ir em ents.

◆

Carefully read this user manual in its entirety and keep it safe for future reference.

It is essential to know the information and comply with the instructions given in this

manual to ensure the fitting is installed, used and serviced correctly and safely.

◆

My company disclaims all liability for damage to the fitting or to other property or

persons deriving from installation, use and maintenance that have not been carried

out in conformity with this user manual, which must always accompany the fitting.

◆

My company reserves the right to modify the characteristics stated in this user

manual at any time and without prior notice.

Contents

1

. Safety information............................................................................................. .. .....2

2.Technical information...............................................................................................3

3.Attachment ........................................................................................5

4.Installation and connecting....................................................................... ................6

5. Control panel................................................................................ ............................7

6. Menu setting................................................................................. ............................8

7.Channel function.............................................. .......................................................10

8. .....................................................................................15

9. .....................................................................................16

10. ........................... ....................... ....................... ....................... ....16

11. ...........................................................17

12. Company information........................................... ................................................18

and body size

Circuit connecting diagram

Duty exonerative and copyright protection

Cleaning and maintenances

Tro ubeshooting

1

www.tourprolighting.com

LIGHT SKY

• Installation

Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
The safety chain must be properly hooked onto the fitting and secured to the framework, so that,
if the primary support system fails,the fitting falls as little as possible.
If the safety chain gets used, it needs to be replaced with a genuine spare.

• MINIMUM DISTANCE OF ILLUM INATED OBJECTS

The projector needs to be positioned so that the objects hit by the beam of light are at least
12 metres from the lens of the projector.

• Minimum distance from flammable materials

The projector must be posit
every point on the surface of the fitting.

Ioned so that any flammable materials are at least 0.2 metres from

• Mounting surfaces

It is permissible to mount the fitting on normally flammable surfaces.

• Maximum ambient temperature

Do not operate the fixt ℃ure if the ambient temperature (Ta) exceeds 38 .

•Protection against electrical shock

Connection must be made to a power supply system fitted with efficient earthing (Class I appliance
according to standard EN 60598-1).
It is,moreover, recommended to protect the supply lines of the projectors from indirect contact and/or
shorting to earth by using appropriately sized residual current devices.

• Connection to mains supply

Connection to the electricit
Check that the mains frequency and voltage correspond to those for which the projector is designed
as given on the electrical data label.
This label also gives the input power to which you need to refer to evaluate the maximum number
of fittings to connect to the electricity line, in order to avoid overloading.
Don't use the power cable when the insulation is damaged.
It must be the manufacturer or distributor or the professional person to change the damaged power
cable in order to avoid any dangerous.

y mains must be carried out by a qualified electrical installer.

• Temperature of the external surface

The maximum temperature that can be reached on the external surface of the fitting, in a thermally
steady state, is 100℃.

• Maintenance

Before starting any maintenance work or cleaning the projector, cut off power from the mains
After switching off, do not remove any parts of the fitting, to avoid getting burnt for at least 30 minutes.
After this time the likelihood of the lamp exploding is virtually nill.
The fitting is designed to hold in any splinters produced by a lamp exploding. The lenses must be
mounted and, if visibly Damaged, they have to be replaced with genuine spares.

supply.

• Lamp

The fit
apparatus.

-Carefully read the "operating instructions" provided by the lamp manufacturer.

-Immediately replace the lamp if damaged or deformed by heat.

ting mounts a high-pressure lamp that needs an external igniter. This igniter is fitted onto the

• Battery

This product contains a rechargeable lead-acid battery. To preserve the environment, please d
the battery at the end of its life according to the regulation in force.

ispose

SAFETY INFORMATION

The products referred to in this manual conform to the European Community Directives to which
they are subject:

•Low Voltage 2006/95/CE

•Electromagnetic Compatibility 2004/108/CE

Pb

12m

t 100℃

c

t 38℃

a

2

LIGHT SKY

LIGHT SKY

●

●Power

IP2000:495W

IP3000:628W

●Lamp(IP2000)

- Brand:SIRIUS HRI 330W OSRAM

- Colour temperature:3200K~7800K

- Average life 1500h

●Lamp(IP3000)

- Brand:SIRIUS HRI 440W S

- Colour temperature:3200K~7800K

- Average life 1200h

●Motors

14PCS mute sound motor.

●Channels

20/24 control channels

●

Beam:0-2.1°

DMX 512/WIRELESS DMX 512(Apolegamic)

●Strobe

lens strobe(0.5-20 times/second)

●Dimmer

0-100% linear adjustment

●Prism

3-facet prism+8-facet prism

●Lens

High presision optical lens

●Travel

- PAN = 540°

- TILT = 250°

●Maximum speeds

- PAN = 2.9s/540°

- TILT = 1.5s/250°

●Resolution

- PAN = 2.11°

- PAN FINE = 0.008°

- TILT = 0.98°

- TILT FINE = 0.004°

Power supplies available

AC100-240V/50-60Hz

Beam angle

TECHNICAL INFORMATION

●

Automatic charging battery,IP could be set

without electricity.

●Features

Remote control lamp’s switch function,

display light and lamp’s using time,

automaticallay adjust cooling-fan’s speed,

Drop 60W power when strobe lens.

●IP55 protection rating

- Protected against the entry of solid bodies

larger than 12mm.

- Bipolar circuit breaker with thermal protection.

- Automatic break in power supply in case of

overheating or failed operation of cooling

system.

●Cooling

Forced ventilation with axial fans.

●Structure

Heat-proof plastic+module pressing alloy materials.

●CE Marking

- In conformity with the European Union Low Voltage.

- Directive 2006/95/CE and Electromagnetic

compatibility Directive 2004/108/CE.

●Two side handles for transportation.

●Device locking PAN and TILT mechanisms for

transportation and maintenance.

●Weights and size

Flycase Size:

2PCS:935x620x800(mm)

N.W.:45.2kg G.W.:90kg

IP set

3

www.tourprolighting.com

Static whee l(1 white + 1 2 gobo)
(please refer to the actual material)

Photometr ic Data:

Distance m

Diameter m( ft in )

Color Wheel:(please refer to the actual material)

1

6

7

8

9

12

2

3

4

5

10

11

White

UV

Jacinth

Cyan

Yellow

Pink

Magenta

Yellow

Dark green

Blue

Black

CTB8000

Dark red

0.57(1 '9" )

0.57(1 '9" )

0.75(2 '5" )

0.75(2 '5" )

1.2(4' )

1.2(4' )

1.5(5' )

1.5(5' )

1.87(6 ')

1.87(6 ')

0.48(1 '6" )

0.46(1 '5" )

131215

15

30

30

40

40

20

20

50

50

0

0

0.5

0.5

1

1

0.5

0.5

1

1

Lux(fc)

Lux(fc)

600000 (5 5762 )

600000 (5 5762 )

462000 (4 2937 )

310000 (2 8810 )

266000 (2 4721 )

183000 (1 7007 )

1170 00( 108 74)

81500( 75 74)

65500( 60 87)

47000( 43 68)

44200( 41 08)

30200( 28 07)

IP3000

IP2000

Highli ght s

Distance m

Diameter m( ft in )

2.1

°

2.1

°

4

LIGHT SKY

LIGHT SKY

Attachment contents- Fig. 1

2

Body Size-- -Fig 2

ATTACHMENT AND BODY SIZE

LAMP

1

SAFETY CORD

DMX CABLE

WARRANTY CARD

USER MANUAL

BRACKET

(fitted into projector)

5

www.tourprolighting.com