TouchTunes 700220-001, CV-509 Installation And Setup Manual

HDMI / DVI to Component

CONVERTER

P/N: 700220-001 (CV-509)

Installation and Setu

P/N: 900420-001

Revision 01 − October, 2010

Safety and Notice

The HDMI / DVI to Component Converter [P/N: 700220-001 (CV-509)] has been tested for
conformity to safety regulations and requirements, and has been certified for international
use. However, like all electronic equipments, the HDMI / DVI to Component Converter should
be used with care. Please read and follow the safety instructions to protect yourself from
possible injury and to minimize the risk of damage to the unit.

z Follow all instructions and warnings marked on this unit.
z Do not attempt to service this unit yourself, except where explained in this manual.
z Provide proper ventilation and air circulation and do not use near water.
z Keep objects that might damage the device and assure that the placement of this unit is

on a stable surface.

z Use only the power adapter and power cords and connection cables designed for this

unit.

z Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

Installation and Setu

Chapter 1 Introduction 1

Overview 1
Features 1
Package Contents

Specifications

1
2

Chapter 2 Panel Description 3

Chapter 3 Connection Diagram 4

Chapter 4 Hardware Installation 5

Chapter 5 EDID Learning 5

Warranty 5

Table of Contents

Rev.0908