TOTO TCF794CG, TCF894CG, TCF796CG, TCF896CG, TCF801CG References for preparation of the connections

References for preparation of the connections

WASHLET™ RX / RX EWATER+ (TCF794CG / TCF894CG)
WASHLET™ SX / SX EWATER+ (TCF796CG / TCF896CG)
WASHLET™ RW (TCF801CG)
WASHLET™ SW (TCF803CG)

eu.toto.com

Before installation, be sure to read the installation manual and the separate safety precautions sheet.

Default connection positions

To be provided on site

Water connection

 Flexible cold water connection 460 mm (flexible hose)
 Cold water supply finishing with stop valve 3/8” male

connection (not included) to connect to the
WASHLET™ flexible hose 3/8” female

 Pressure min. 0,1 MPa (dynamic)

Pressure max. 1,0 MPa (static)

Electrical connection

 Flexible power cord 400 mm, H05VV-F 3G1.00mm²
 Hirschmann electrical connector (included)
 Power supply 220 – 240 V ~ 50/60 Hz
 Max. Power rating 1451 W

Prepare the connection within the above specified area.

We suggest using the TOTO connecting set SP10695UN for hidden connections WASHLET™ RW, RX, SX
GL 2.0, EK 2.0 to prepare the water connection on Geberit frames with Sigma concealed cistern 12 cm
with empty conduit, located on the left hand side 50 mm from the center of the frame at the same
height as the fixation bolts.

Install a power source circuit cutoff device (according to IEC 60335-1).
Install a Residual Current Circuit Breaker (RCCB) (IN = 30 mA) that disconnects all phases from mains.

2020/05

Water and electrical
connections can come
through the shaded
area in order to go
through the
predetermined holes
within the ceramic

Predetermined holes
within the ceramic (WC
RP CW542EY)

* Measurements in mm

Water inlet

Mounting bolt for
the ceramic

Water outlet