TOTO TCF796CG References for preparation of the connections
References for preparation of the connections
2018/10
Water and electrical
* Measurements in mm
Water inlet
WASHLET™ RX TCF794CG
WASHLET™ SX TCF796CG
Before installation, be sure to read the installation manual and the separate safety precautions sheet.
Default connection positions
Mounting bolt for
the ceramic
Water outlet
To be provided on site
Prepare the connection within the above specified area.
We suggest using the TOTO connecting set SP10695UR for installation frame for WASHLET GL 2.0 and
WASHLET EK 2.0 with hidden connections to prepare the water connection on Geberit frames with
empty conduit (located on the left hand side 50 mm from the center of the frame at the same height as
the fixation bolts).
Install a power source circuit cutoff device (according to IEC 60335-1).
Install a Residual Current Circuit Breaker (RCCB) (I
connections can come
through the shaded
area in order to go
through the
predetermined holes
within the ceramic
Predetermined holes
within the ceramic (WC
RP CW542EY)
Water connection
• Flexible cold water connection 460 mm (flexible hose)
• Cold water supply finishing with stop valve 3/8” male
connection (not included) to connect to the
WASHLET flexible hose 3/8” female
• Pressure min. 0,1 MPa (dynamic)
Pressure max. 1,0 MPa (static)
Electrical connection
• Flexible power cord 400 mm, H05VV-F 3G1.00mm²
• Hirschmann electrical connector (included)
• Power supply 220 – 240 V ~ 50/60 Hz
• Max. Power rating 1451 W
N = 30 mA) that disconnects all phases from mains.
eu.toto.com
Loading...