Toto PO TL380SDL, EN TL382SDL Installation And Owner's Manual

ENGLISH ESPAÑOL FRANÇAIS

PO

®

Installation and Owner’s Manual
Manual de Instrucciones y del Propietario
Manuel d’installation et d’utilisation

Single lever lavatOry Faucet
griFO MOnOMandO de lavabO
rObinet de lavabO à MOnOcOMMande

en

tM

TL380SDL

TL382SDL

Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends online Warranty Registration. Please visit our
web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact
TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 [phone] or
[phone] when calling from outside of U.S.A.

DISCONTINUED

2

ENGLISH

TABLE OF CONTENTS

Thanks for Choosing Toto! ................................................................................. 2

Care And Cleaning ............................................................................................2

Caution .............................................................................................................. 2

Tools you will need ............................................................................................3

Before Installation .............................................................................................. 3

Installation Procedure ........................................................................................ 4

Rough in ........................................................................................................... 6

Troubleshooting ................................................................................................. 9

Replacement parts .......................................................................................... 10

Warranty .......................................................................................................... 11

THANKS FOR CHOOSING TOTO!

The mission of TOTO is to provide the world with healthy, hygienic and
more comfortable lifestyles. We design every product with the balance
of form and function as a guiding principle. Congratulations on your
choice.

CARE AND CLEANING

Your new faucet is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with mild soap, rinse
thoroughly with warm water and dry with a clean, soft cloth. Do not use
abrasive cleaners, steel wool or harsh chemicals, as these will dull the

nish. Failure to follow these instructions may void your warranty.

CAUTION

For safe operation of the faucet, please observe the following:
Operating pressure:

Minimum Pressure……..7psi [0.05MPa] (owing pressure)
Maximum Pressure…….108psi [0.75MPa] (non-owing pressure)

Do not reverse the hot and cold-water inlets
Hot water supply temperature must not exceed 185°F [85°C]
Do not use steam for hot water supply
Do not use the product at ambient temperature below 32°F (0°C).
Do not disassemble the ceramic valve

To ensure the product maintains its specied ow rate to meet EPA
standard, always use manufacturere’s specied aerator for that faucet

DISCONTINUED

3

ENGLISH

Faucet Body 1 piece

Gid Drain

1 piece

Extra Grid
Unit

1 piece

Aerator key

1 piece

(TL382SDL)

Hex Wrench

1 piece

TOOLS YOU WILL NEED

Pipe Tape Socket

Wrench

Adjustable

Wrench

S

crewdrivers

BEFORE INSTALLATION

■ Observe all local plumbing codes

■ Make sure water supply is shut off

■ Read these instructions carefully to ensure proper installation

■ TOTO reserves the right to update product design without notice

■ Check to make sure you have the following parts indicated below

DISCONTINUED

4

ENGLISH

Spout
retaining ring

Locknut

Flex Hose

Spout

INSTALLATION PROCEDURE

1. Faucet Body Installation
Note: DO NOT LOOSEN

THE FLEX HOSE WHEN
INSTALLING THE FAUCET.

■ Insert  exible hoses

through the hole on deck
one at a time

■ Slide the spout retaining

ring into place and secure
the spout with locknut

■ Adjust the spout to face

forward. Hold the spout in
place. Tighten locknut

■ Connect  ex hoses to

supply lines. Make sure the
red hose connects to the
hot supply line and the blue
hose connects to the cold
supply line

DISCONTINUED

5

ENGLISH

Drain  ange

Gasket

Locknuts

2. Drain Installation

■ Apply pipe tape to the
 ange threads

■ Insert  ange and gasket

into the drain hole

■ Install the gasket and

locknuts on the drain

■ Insert the drain cap unit
into the drain  ange; rotate

clockwise to lock

■ If installed with LT382
EnTM Lavatory, use extra
grid unit provided.
Discard the drain cap unit.

Drain Cap with
lock

Grid unit*

Gasket

Washer

DISCONTINUED

6

ENGLISH

15/16"
[24mm]

11-3/8" [290mm]

1"

[25mm]

4-3/4" [120mm]

R 5-3/4"

[145mm]

25˚

14-1/2" [367mm]

1-5/8"
[43mm]

Min
2-3/8"
[60mm]

3-7/16" [88mm]

2-1/4”

[57mm]

1-3/4"

[45mm]

Max 1-3/8"
[35mm]

2-1/4" (57.8mm)

2-1/8

" (54mm)

1-1/3

"

(34mm)

3/4"

(19.1mm)

2-7/8" (72mm)*

1-1/3"

(35mm)

5-1/8" (130mm)

3/8" Comp

MIX

COLD

HOT

TL380SDL

OPEN

CLOSE

ROUGH IN

DISCONTINUED

7

ENGLISH

TL382SDL

R 4"[100mm]

22.5˚

22.5˚

1-3/4"

[45mm]

1-5/8"
[43mm]

25˚

5

"

[127mm]

3-3/4

"

[95mm]

Max 1-3/8"

[35mm]

3/8" Comp

9-3/8

"

[237mm]

15/16"
[24mm]

8" [205mm]

Min
2-3/8"
60mm

2-1/4" (57.8mm)

2-1/8

" (54mm)

1-1/3"

(34mm)

3/4

"

(19.1mm)

2-7/8" (72mm)*

1-1/3"

(35mm)

5-1/8" (130mm)

MIX

COLD

HOT

OPEN

CLOSE

ROUGH-IN

DISCONTINUED

8

ENGLISH

2-3/8”
[60mm]

1-11/16” [43mm]

26-3/4” [680mm]

1-3/8”

[35mm]

11-7/16[290mm]

19-1/2” [495mm]

13-3/4” [350mm]

LT380

TL380SDL

TL382SDL

LT382

1-3/8”[35mm]

1-11/16”

[43mm]

5-1/2” [139mm]

14-1/4” [362mm]

8-3/4” [223mm]

21” [534mm]

PO

®

EN

TM

ROUGH-IN

DISCONTINUED

9

ENGLISH

3. Is it dirty or damaged?

TROUBLESHOOTING

■ If you have followed the instructions carefully and your faucet

still does not work properly, take these corrective action steps

Problem Area to Inspect

Leakage

1, 2, 3, 4,5

Loose H

andle

6,7

Loose S

pout

8

Aerator

1. Is it tightened?
O-ring

2. Is it dirty or damaged?
Cartridge

4. Is the gasket dirty or
damaged?

Valve adapter

5. Is it tightened?

Spout retaining ring &
locknut

8. Is it tightened?

6. Screw &
washer

7. Setscrew
Is it tightened?

DISCONTINUED

10

ENGLISH

1

2

3

4

5

6

7

8

17A. ( TL382SDL )
17

B. ( TL380SDL )

18A. ( TL382SDL )
18

B. ( TL380SDL )

11

12

13

14
15

16

9

10

TL382SDL

TL380SDL

*Please sPecify finish when ordering

1. ThP4208 * index caP & seT screw

2. ThP4217 * lever handle

3. ThP4031 small screw & washer

4. ThP4210 sPindle

5. ThP4211 * valve caP

6. ThP4003 valve adaPTer

7. ThP4212 carTridge

8. ThP4218 sPouT connecTion uniT

9. 9au4251 aeraTor (Tl382sdl)
9au4256 l

aminar flow regulaTor

(Tl382sdl#TB)

10. ThP4221 a

eraTor key (Tl382sdl)

11. Thu4505

* grid drain assemBly

12. 1fu4475 * grid uniT

13. ThP4222 sPouT reTaining washer & locknuT

14. ThP4215 gaskeT (Tl380sdl)

15. 9au4250 a

eraTor (Tl380sdl)

16. ThP4220

* aeraTor housing (Tl380sdl)

17

a. ThP4402 * sPouT (Tl382sdl)

17

B. ThP4403 * sPouT (Tl380sdl)

18

a. ThP4404 flex hoses (Tl382sdl)

18

B. ThP4405 flex hoses (Tl380sdl)

REPLACEMENT PARTS

DISCONTINUED