Toto MW474574CEFG01 User Manual

Instruction Manual with Warranty
TOTO U.S.A., Inc. 1155 Southern Road Morrow, GA 30260
Phone : (770) 282 8686
Warranty Registration and Inquiry For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300 when calling from outside of U.S.A.
TOTO ASIA OCEANIA PTE. LTD.
TOTO ASIA OCEANIA PTE. LTD.
TOTO ASIA OCEANIA PTE. LTD.
TOTO LTD.
TOTO INDIA INDUSTRIES PVT. LTD
TOTO INDIA INDUSTRIES PVT. LTD
TOTO VIETNAM Co., Ltd.
10, Eunos Road 8, #12-07, Singapore Post Centre. Singapore 408600. Phone : +65-6744-6955 Fax : +65-6841-0819 http://asia.toto.com/
Middle East Branch LOB19-1701-1702, Jebel Ali Free Zone, P.O. box 261804, Dubai U.A.E. Phone : +971-4-886-5983 Fax : +971-4-886-5986 http://asia.toto.com/
Bangkok Representative Office G Floor, Q.House Ploenjit Building, 598 Ploenchit Road, Lumpini, Pathumwan, Bangkok 10330 Thailand http://www.totobkk.com
Head office 506, 5th Floor, ASCOT Center, Sahar Airport Road, Andheri (East) Mumbai 400099, Maharashtra, India. Phone : +91-22-2832-5741/5742 Fax : +91-22-6725-8780 http://asia.toto.com/
Delhi Branch 909-909A, 9th Floor, Block-E, International Trade Tower, Nehru Place, New Delhi 110019, India. Phone : +91-11-4654-2421 to 26 Fax : +91-11-4654-2430 http://asia.toto.com/
Ha Noi Branch R. 810, Daeha Business Centre, 360 Kim Ma St., Ba Dình Dist., Ha Noi City Phone : +84-4-37714354 Fax: +84-4-37714355 http://toto.com.vn Da Nang Branch 10th Floor, ACB Building, 218 Bach Dang Str., Hai Chau Dist., Da Nang City Phone : +84-511-3565261 Fax: +84-511-3565262 http://toto.com.vn Ho Chi Minh Branch R. 1301, Centec Tower, 72-74 Nguyen Thi Minh Khai Str., Dist. 3, Ho Chi Minh City Phone : +84-8-38229520 Fax: +84-8-38229522 http://toto.com.vn
WASHLET
S350e SW584 (TCF4731U) SW583 (TCF4730U) S300e SW574 (TCF4721U) SW573 (TCF4720U)
TCF4732A TCF4731A
You are advised to record the following information to allow quick service.
Date of purchase : Name of shop :
Date : year month day
Tel : ( )
2012.6.12 D08706
Thank you for your recent purchase of the TOTO Washlet. Please read the enclosed information to ensure the safe use of your product.
Be sure to read this Instruction Manual before using your product and keep it in a safe place for future reference.
What functions are available on your product?
Table of Contents
The model name and part number are indicated
on the bottom side of the toilet lid.
The available functions vary according to the model.
Model
Functions Part No.
Rear cleansing
Soft rear cleansing
Front cleansing
Wide front cleansing
Wand position adjustment
Water pressure adjustment
Oscillating cleansing
Pulsating cleansing
Personal setting lock
Warm Air Drying
Temperature Adjustment
Opening and closing the toilet seat with remote control
Auto lid opening and closing
Heated seat
Timer energy-saver
Auto energy-saver
Auto wand cleaning
Deodorizer
Main Unit One-touch removal
Removable toilet lid
Wand cleaning
Basic
Functions
Convenient
Functions
Sanitary
Functions
Maintenance
Cleaning
Changing the washing method
Drying
Changing the temperature
Opening and closing
Lighting up Soft light
Heating the toilet seat
Saving energy
"ewater+" sanitizing
Removing odors
S350e S300e
SW584 SW583
SW574 SW573
TCF4732A TCF4731A
Safety Precautions ..............................4
Operational Precautions ...................11
Cleaning
Parts Names ......................................12
Preparation ........................................16
Support
Basic Operations ...............................18
Automatic Functions (Convenience
Features) ............................................22
Sanitary Toilet
Automatic Functions (Cleaning
Features) ............................................24
Temperature Adjustment ..................26
Energy-Saver Features .....................28
Power Plug .........................................32
Main Unit ............................................33
Ref.
Page
Deodorizing Filter ..............................33
Gap between the Main Unit and the
Toilet Bowl ..........................................34
Gap between the Main Unit and the
Toilet Lid .............................................35
Wand ...................................................36
Water Filter Drain Valve ....................37
18
Changing Settings .............................38
What to Do? .......................................50
26
18
22
28
24Auto bowl cleaning
34
35
36
The self-cleaning functions operate automatically.
(See pages 24 and 25 for details.)
As you move away As you stand up As you approach
A mist is sprayed in the toilet bowl to make it more diffi cult for dirt to adhere.
When you sit on the toilet seat, the deodorizer operates.
The wand is cleaned with "ewater+". (The wand extends and then retracts.)
"ewater+" is sprayed in the toilet bowl to maintain cleanliness.
If you cannot operate with the remote
control .............................................50
Freeze Damage Prevention
Long Periods of Disuse
............51
...................52
Troubleshooting ................................53
Specifi cations .................................... 58
Warranty .............................................60
ReferenceMaintenanceOperationIntroduction
2 3
Safety Precautions
These precautions are important for safe usage. Be sure to follow them and use the product correctly.
Symbols and meanings
WARNING
CAUTION
The following symbols are used to indicate important safety instructions for the use of the product.
Symbol Defi nition
This symbol indicates a prohibited use of the product.
This symbol is used to indicate a required step in the use of this product.
May result in death or serious injury.
May result in injury or property damage.
WARNING
Do not plug or unplug the power plug with wet hands.
Doing so may cause electrical shock.
Do not get any water or cleaning products on the main unit or power plug.
Doing so may cause a fi re, electrical shock, heat or a short.
Doing so can cause the product to crack rerulting in injury or water damage.
Never disassemble, repair or alter.
Doing so may cause a fi re, electrical shock, heat or a short.
Do not install the Washlet on moving vehicles such as RV's or boats.
Doing so could cause a fi re, electric shock, a short or malfunction.
The toilet seat, lid, main unit or other part might come loose and fall apart, resulting in injury.
Do not use the Washlet if a malfunction occurs.
[USA]
In the following cases, unplug the plug out from the outlet and close the water supply valve.
[Asia, Oceania]
In the following cases, switch the breaker on the distribution board to OFF and close the water supply valve. Possible malfunctions:
Water is leaking from a pipe or the main unit
The product is cracked or broken.
The product makes a strange noise or emits a strange odor.
The product emits smoke.
The product is abnormally hot.
The toilet seat cushion is out of place.
Continued use after malfunction could cause a fi re, electrical shock, heat, short, injury or water damage.
WARNING
Only use tap water or potable well water (underground water). Do not use seawater.
Doing so may cause irritation to the skin and malfunction.
Do not touch the power plug during thunderstorms.
Doing so may cause electrical shock.
Do not allow the water supply hose to touch the power plug or outlet.
Doing so may cause condensation resulting in a fi re, electrical shock, heat or a short.
Do not do anything that could damage the power cord, power plug or toilet seat cord.
Do not strike, yank, twist, excessively bend, damage, alter, or heat the electrical cords. Also, do not place anything heavy, bind or pinch the electrical cords.
Using a damaged electrical cord may result in a fi re, electrical shock, heat or short.
Do not use a loose or faulty electrical outlet.
Doing so could cause a fi re or a short.
Do no use any outlet or wiring equipment beyond its specifi ed rating.
Plugging too many plugs into the same outlet, for example using outlet splitters, can cause fi re due to heat.
Do not use any power supply other than the one specifi ed.
[USA]
AC 120 V, 60Hz
[Asia, Oceania]
AC 220 V, 50/60Hz
Doing so could cause a fi re or excessive heat.
Do not stick a fi nger or anything else into the warm air outlet.
Do not place anything on the warm air outlet or drape clothes over it.
Doing so could cause burns, electrical shock or malfunction.
Beware of low-grade burns
Improper use of heated toilet seats could cause a low-grade burn. When sitting for a long time on the toilet seat, switch the toilet seat temperature adjustment to "OFF". When any of the following persons use a heated seat or warm air drying, someone should switch the toilet seat temperature adjustment to "OFF" and switch the drying air temperature to "Low".
Young children, the aged and other users unable set the temperature appropriately themselves
The ill, physically disabled and others who do not have freedom of movement
Those using any medicines that cause drowsiness (sleeping medicine or cold medicine), those who have been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep
Always connect the Washlet to the cold water supply.
Connecting to hot water supply may result in burns and equipment damage.
Make sure that a properly grounded (3 prong) outlet has been installed.
Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or short circuit.
Introduction
4 5
Safety Precautions (Continued)
WARNING
Introduction
WARNING
Do not unplug by pulling the cord.
To unplug, hold the plug, not the cord.
Pulling on the cord may cause damage and result in fi re or heat.
This is an electrical product. Do not install it anywhere water is likely to get on the product or anywhere with humidity high enough that water is likely to form on the surface of this product. When using the product in a bathroom, install a fan or ventilation port and ensure good air fl ow through the bathroom.
Failure to do so could cause a fi re or electrical shock.
If the electric cord is damaged, avoid danger by having the manufacturer’s repair department or equivalent specialist replace it.
Insert the power plug securely into the outlet.
Failure to do so could cause a fi re, heat or a short.
[USA]
Periodically remove dust and dirt from the electrical plug and make sure it is securely plugged into the wall outlet.
Failure to do so could cause a fi re, heat or a short. Pull the plug out from the outlet and wipe clean with a dry cloth.
Always unplug the plug from the outlet before cleaning or maintenance.
Failure to do so may cause electrical shock.
Except when using “Wand cleaning”
Always unplug the plug from the outlet before removing the main unit.
Failure to do so could cause a fi re or electrical shock.
[Asia, Oceania]
Check that the power plug is waterproofed with silicone rubber.
A power plug that is not water-proofed could cause a fi re and electrical shock. * If the power plug is not water-proofed, ask the contractor who did the installation to water-
proof it.
Check that an appropriate ground is installed.
If the ground is not installed, if there is a breakdown or electrical current leak, the lack of a ground could cause electrical shock. For the ground, use copper wire with a ground resistance of 100 Ω max. and a diameter of
0.005 ft (1.6 mm) min. * If there is no ground installed, ask the contractor who did the installation to install a ground.
Check that the outlet for electrical power is as follows.
Failure to do so could cause a fi re or electrical shock. a. Protect the outlet circuits with a high-sensitivity quick leakage switch (with a rated current
sensitivity of 15mA or less) or an insulating transformer (1.5kVA min., 3kVA max.).
b. Install the outlet and plug positioned at least 2.62 ft (0.8 m) above the fl oor and as far as
possible from the bathtub.
* Check that the wiring in a. and b. above is complete. If the wiring has not been completed,
ask the contractor who did the installation to do it.
[Asia, Oceania]
Always switch the breaker on the distribution board to OFF before cleaning or maintenance.
Failure to do so may cause electrical shock.
Except when using “Wand cleaning”
Always switch the breaker on the distribution board to OFF before removing the main unit.
Failure to do so could cause a fi re or electrical shock.
CAUTION
Keep cigarettes and other open fl ames away from this product.
Failure to do so could cause a fi re.
When cleaning or maintaining the plastic parts (main unit etc.) or the water supply hose, use a kitchen cleaner diluted with water. Do not use any of the following.
Toilet cleaner, household cleaner, benzene, paint thinner, powdered cleanser or nylon scrubbing pads.
These items could damage or crack the plastic and cause injury or malfunction.
These items could damage the water supply hose and cause a water leak.
Do not apply strong force, mechanical shock, step on or stand on the toilet seat, toilet lid or main unit. Also do not place any heavy object on the toilet seat, toilet lid or main unit.
Doing so could cause cracking or cause the main unit to come loose and fall resulting in injury.
Doing so could damage the product and cause injury or water damage.
Do not lift up this product by the toilet seat or lid. Do not raise the toilet seat or lid while objects are resting on top of the toilet.
Doing so could cause the main unit to come loose and fall resulting in injury.
Do not fold or crush the water supply hose.
Doing so could cause water leaks.
To prevent a sudden water leak, do not remove the water fi lter drain valve when the water supply valve is open.
Doing so will cause water to spurt out. Refer to Page 37 for instructions on cleaning the water fi lter drain valve.
Do not install the base plate, which is not attached, to the Washlet.
Doing so could cause a fi re or damage.
Do not use the product if the main unit is unstable.
Doing so could cause the main unit to come loose and fall resulting in injury.
6 7
Safety Precautions (Continued)
CAUTION
If a water leak should occur, always close the water supply valve.
Preventing damage to pipes and hoses due to freezing
Frozen water pipes could cause the main unit and the pipes to break, resulting in a water leak. Regulate the room temperature to prevent the pipes and hoses from freezing during cold months.
[USA] When not using the Washlet over an extended period of time, drain the water
out of the Washlet and the water supply hose, and pull the electrical plug from the outlet.
When using the product again, allow the product to refi ll with water fi rst.
Otherwise, the water in the tank might become contaminated and cause skin infl ammation or other problems.
Leaving the power ON might cause a fi re or heat.
[Asia, Oceania] When not using the Washlet over an extended period of time, drain the water
out of the Washlet and the water supply hose, and switch the breaker on the distribution board to OFF.
When using the product again, allow the product to refi ll with water fi rst.
Otherwise, the water in the tank might become contaminated and cause skin infl ammation or other problems.
Leaving the power ON might cause a fi re or heat.
When installing the water fi lter drain valve, make sure that it is securely tightened in its proper position.
Failure to securely tighten it might cause water leaks.
Push the main unit securely on to the base plate.
After pushing the main unit until a click sound is heard, pull it slightly toward you to make sure that the product does not detach.
Failure to do so could cause the main unit to come loose and fall resulting in injury.
DANGER To reduce the risk of electrocution:
1. Do not use while bathing.
2. Do not place or store the product where it can fall or be pulled into a tub or sink.
3. Do not place in or drop into water or other liquid.
4. Do not reach for the product when it has fallen into water. Unplug immediately.
DANGER
1. Close supervision is necessary when this product is used by, on, or near children or invalids.
2. Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
3. Never operate this product if it has a damaged cord or plug, is not working properly, has been dropped or damaged, or has been dropped in water. Return the product to a service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never block the air openings on the product or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and other similar items.
6. Never use while sleepy or drowsy.
7. Never drop or insert any object into any opening or hose.
8. Do not use outdoors. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
9. Connect this product to a properly grounded outlet only.
See "Grounding Instructions" in Page 10.
10. Tank should be fi lled with water only.
To reduce the risk of burns, electrocution, fi re or injury to persons:
Introduction
8 9
Safety Precautions (Continued)
Operational Precautions
Grounding Instructions
For prevention of malfunctions
Do not block the body sensor or the remote control transmitter or receiver.
For prevention of damage
Wipe plastic areas such as the main unit and remote control with a soft, wet cloth.
<About the Body Sensors>
This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electrical current.
The plug must be plugged into an outlet that is properly installed and grounded.
DANGER - Improper use of the grounding plug can result in a risk of electric shock. If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either fl at-head terminal.
Check with a qualifi ed electrician or serviceman if the grounding wire instructions are not completely understood, or if in doubt as to whether the product is properly grounded.
This product is factory equipped with a specifi c electric cord and plug to permit connection to a proper electric circuit. Make sure that the product is connected to an outlet having the same confi guration as the plug.
No adapter should be used with this product. Do not modify the plug provided - if it will not fi t in the outlet, have the proper outlet installed by a qualifi ed electrician.
If the product must be reconnected for use on a different type of electric circuit, the reconnection should be made by qualifi ed service personnel.
If it is necessary to use an extension cord, use only a three wire extension cord that has a three blade grounding plug, and a three-slot receptacle outlet that will accept the plug on the product.
Replace or repair a damaged cord.
Grounding pin
Save these instructions.
Two types of body sensor are used.
Body sensor A detects changes in heat.
Detection may be diffi cult when the room temperature exceeds 86 °F (30 °C), such as in the summertime.
When sunlight is directly on the sensor area or a heater is used in the bathroom, the sensor may detect incorrectly due to the heat, resulting in the automatic operation of functions such as auto lid opening and closing.
When the bathroom door is open, the sensor may detect people who pass to the front or side of the toilet.
Body sensor B detects when someone stands in front of the toilet bowl.
Body sensor B emits an infrared beam as shown in the fi gure. When someone moves into the line of this infrared beam, the sensor detects the person.
*
Detection by the sensor may be diffi cult when the toilet is used by someone small, such as a child.
Body sensor A Body sensor B
S350e S300e
TCF4732A TCF4731A
<About the seat switch>
When you sit on the toilet seat, the seat switch turns ON, enabling you to use various features.
(A click sound is heard when the seat switch is ACTIVATED.)
Switch
ON
Seat switch (Built-in)
The seat switch will not turn on unless you sit on the seat properly.
The toilet seat lowers.
Gap
Note
When a child uses the Washlet, the seat switch may not be ACTIVATED their light body weight.
Since the toilet seat is designed to move up and down, a clearance is provided between the toilet seat cushion and the toilet bowl.
Do not lean against the toilet lid.
Problem Prevention
[USA]
Disconnect the power plug if there is a risk of lightning.
[Asia, Oceania]
Switch the breaker on the distribution board to OFF if there is a risk of lightning.
A toilet seat cover or a toilet lid cover cannot be used. (The body sensor or seat switch may not function properly.)
Cover
Do not urinate on the main unit, toilet seat or wand. (Doing so may cause pink or brown stains or a malfunction.)
Do not apply strong forces to the control panel of the remote control.
When using a toilet bowl cleaner to clean the toilet, wash it off within 3 minutes and leave the toilet seat and toilet lid open.
Wipe off any cleaner that remains on the toilet bowl. (If vapor from a toilet bowl cleaner enters the main unit, it may cause to a malfunction.)
Do not expose to direct sunlight. (Doing so may cause temperature changes resulting in changes in color, irregular heated seat temperature, a remote control malfunction, or a Washlet malfunction.)
Use radios, etc. away from the Washlet. (The Washlet could cause interference with the radio signal.)
If you use a booster seat for infants or a soft highchair, remove it after use.
(Keeping it installed may prevent some of the functions from being used.)
Do not apply force to the remote control. (May cause malfunctions.) To prevent the hanger from being dropped, set it in the remote control hanger when you are not using it. Be careful not to expose it to water.
About rear cleansing, soft rear cleansing, front cleansing and wide front cleansing
These functions wash away waste and dirt from a localized area of your body.
Do not cleanse too much or for too long.
Doing so may wash away normal bacteria, upsetting the balance of bacteria inside your body.
People who are receiving medical treatment or therapy in this localized area should consult their doctor before use.
10 11
Introduction
Parts Names
S350e
S300e
Toilet lid cushion
Model name,
part no., etc.
Toilet lid
Water supply hose
Water supply valve
Seat switch (Built-in)
Main display
POWER LED
ENERGY SAVER LED
SEAT LED
Warm air dryer door
Wand door
CLEAN indicator
Wand
Right rear of main unit
Deodorizer vent
Right side of main unit
Remote control receiver
Removal button
Deodorizing filter
Introduction
Power plug
Power cord
Water filter drain valve
Water filter drain valve
Cover
Water drain lever
POWER ON/OFF button
This button cannot be used.
* Use in situations such as when the remote control
batteries have discharged.
Heated seat
Washlet control panel
FRONT ON/OFF button
REAR ON/OFF button
Soft light (S350e only)
Toilet lid and toilet seat underside
Toilet seat cushions
Body sensor A
Body sensor B (S350e only)
12 13
Parts Names
TCF4732A
TCF4731A
Toilet lid cushion
Model name, part no., etc.
Toilet lid
Remote control receiver
Water supply hose
Power plug
Water supply valve
Power cord
Seat switch (Built-in)
Water drain lever
Main display
POWER LED
ENERGY SAVER LED
SEAT LED
Warm air dryer door
Wand door
Wand
Heated seat
CLEAN indicator
Right rear of main unit
Deodorizer vent
Toilet lid and toilet seat underside
Right side of main unit
Removal button
Deodorizing filter
Introduction
Water filter drain valve
Water filter drain valve
Cover
Washlet control panel
POWER ON/OFF button
This button cannot be used.
* Use in situations such as when the remote control
batteries have discharged.
FRONT ON/OFF button
REAR ON/OFF button
Soft light
Toilet seat cushions
Body sensor B
Body sensor A
14 15
Preparation
Using the Washlet for the First Time
1. Insert the battery.
Remove the remote control from the hanger.
1
Hanger
Open the battery cover and insert two AA batteries.
2
AA batteries x2
Close
Open
Battery cover
Mount the remote control in the hanger.
3
About the batteries
Use dry cell, alkaline batteries. Follow the
instructions below to prevent the batteries from
rupturing or leaking fl uid.
When replacing the batteries, use new batteries of
the same brand.
If you will not be using the remote control for a long
time, remove the batteries.
Do not use rechargeable batteries.
When the remote control is locked to prevent theft
Remove the screw from the remote control fi xture.
1
(Side view)
Remote control
Wall
Remove the remote control from the hanger.
2
To return
Tighten the screw. (Overtightening may cause damage to parts such as the hanger.)
Hanger
Screw
Loosen
Phillips screwdriver
2. Turn on the power.
[USA]
Insert the power plug.
1
The wand extends and then retracts.
[Asia, Oceania]
Switch the breaker on the distribution board to ON.
The wand extends and then retracts.
Check that the POWER LED on the main display is lit up.
2
If the LED is not lit up, pressing [POWER ON/OFF] will light it up.
If the POWER lamp fl ickers, the main unit is not installed properly. Mount the main unit again. (Page 34)
3. Open the water supply valve.
Fully open the water supply valve.
1
Introduction
16 17
Basic Operations
Opening and closing
Functions that operate when a button is pressed during "REAR", "SOFT REAR", "FRONT" or "WIDE
FRONT" cleansing.
[SEAT OPEN/CLOSE]
Opens and closes the toilet seat. (S350e, TCF4732A, TCF4731A only)
Stopping
[STOP]
Stops the operation.
Cleansing
[SOFT REAR]
*
Cleanses your rear with mild water pres­sure.
[REAR]
Cleanses your rear.
* The mode changes between [SOFT REAR] (Flickering)
and [REAR] (Lit) each time the button is pressed.
[FRONT]
*
Serves as a bidet for women.
[WIDE FRONT]
Serves as a bidet over a wider area.
*
The mode changes between [FRONT] (Flickering) and [WIDE FRONT] (Lit) each time the button is pressed.
Drying
[DRYER]
Dries your front and/or rear.
[OSCILL ATING]
The wand moves back and forth to wash your rear thoroughly. The setting changes between "ON" and "OFF" each time the button is pressed. You can use this function whenever you feel like it.
[POSITION]
The wand position can be adjusted to the front or rear. "▲" Moves to the front, "" Moves to the rear)
[PULSATING]
Washes with the water pressure pulsating between soft and strong. The setting changes between "ON" and "OFF" each time the button is pressed. You can use this function whenever you feel like it.
[PRESSURE]
The water pressure strength can be adjusted for cleansing functions such as REAR. ("+": Stronger, "–": Softer)
Operation
[PERSONAL SETTING LOCK 1/PERSONAL SETTING LOCK 2]
You can store your preferred wand position, water pressure and warm water temperature settings.
To store a setting
While cleansing is in progress, set your preferred wand position, water pressure and warm water temperature, and then press and hold " 1 " or " 2 " for 2 seconds or longer.
To use
After " 1 " or " 2 " is pressed, please push the button used for cleaning. *The wand position and water pressure LED's will light up for about 10 seconds displaying the
programed personal settings. Then the water temperature display will also show the programmed personal setting.
18 19
Loading...
+ 22 hidden pages