Toto LT93101 Installation Manual
Installation Manual
Manual de Instrucciones
Manuel D’Installation
Under Counter Lavatory
Lavabo Bajo el Mostrador
Lavabo Sous Comptoir
Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit
our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260
(888) 295-8134 or (678) 466-1300 when calling from outside of U.S.A.
TABLE OF CONTENTS
Thanks for Choosing TOTO®! ..............................................................................3
Before Installation .................................................................................................3
Included Parts .......................................................................................................4
Warnings ................................................................................................................4
Installation Procedure ....................................................................................... 4-5
Warranty.................................................................................................................6
THANKS FOR CHOOSING TOTO!
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
BEFORE INSTALLATION
If you are installing this product in a new construction or remodel, please
make sure you are following all local plumbing and building codes. Carefully
unpack and examine your new fixture for damage. To help insure that the
installation process will proceed smoothly and correctly, please read these
instructions carefully before you begin.
ENGLISH
If necessary, turn off the water supply and remove the old lavatory. In-
spect the drain and supply pipes and replace them as necessary.
Use the template provided with the lavatory. For replacement installation,
make sure that the existing cutout is the same size or smaller than what is
required for the new lavatory.
Your undercounter lavatory should be installed by an experienced profes-
sional. Failure to follow these instructions may result in product/property
damage and/or personal injury.
Install the lavatory such that future removal of the fixture from under-
neath the counter is possible.
NOTE: The lavatory faucet and drains are not included.
NO TE: The fixture dimension and hydraulic performance meet or exceed all
standards and requirements of CAN/CSA B45 and ANSI/ASME A112.19.2
for vitreous china and A112.19.1 for cast iron.
3
INCLUDED PARTS
Installation Procedure (continued)
ENGLISH
Under Counter Lavatory
Under Counter Mounting Set
- Standard Rim
Under Counter Mounting Set
- Tall Rim
WARNINGS
When this symbol appears in the manual, it is alerting you of
WARNING
potential misoperations that may cause personal injury and/or
property damage.
INSTALLATION PROCEDURE
1) Cut the template out along the inside of the cutting line.
2) Place the template on the countertop, making sure there is enough clearance for
the faucet and trim and for the cabinet beneath the countertop.
3) Trace around the template, marking the center line of the faucet and the location
of the mounting screw.
4) Cut out the opening along the traced template line.
NOTE: A minimum counter thickness of 1” (25.4mm) is required for the provided
installation hardware.
For Wood Countertops:
Standard Rims
a) Mark the screw location on the
countertop using the template.
Sealant
b) Pre-drill the wood screw holes
and water seal the exposed
area.
Metal
Bracket
c) Install the countertop, if it is
not already installed. Drill the
Wood Screw
faucet hole per the manufacturer’s specifications.
d) Install the faucet and drain
fitting per the manufacturer’s
instructions.
Tall Rims
Sealant
e) Apply a continuous bead of
sealant to the top surface of
the lavatory rim where it will
Metal
Bracket
make contact with the countertop.
Wood Screw
NOTE: Sealant is not included.
5) Position the lavatory squarely under the cutout and mount the lavatory via the
provided brackets and screws. Use the appropriate screws for wood or marble/
stone countertops.
DO NOT OVERTIGHTEN THE SCREWS. This may damage the
product and cause personal injury and/or property damage.
WARNING
6) Wipe away any excess sealant and fill any voids as necessary. Allow the sealant to
set for 30 minutes.
7) Connect the trap to the drain and complete the faucet installation per the manufacturer’s specifications.
ENGLISH
For Marble/Stone Countertops:
a) Carefully turn the counter up-
side down and mark the anchor
locations using the template.
b) Drill the anchor holes at the
marked locations and set the
anchors into the countertop
using a setting tool and hammer.
Anchor
Sealant
Metal
Bracket
Machine
Screw
4
8) Run water into the lavatory and check the entire installation for leaks.
5
Loading...