Toto GR TLG02201U, GS TLG03201U Installation And Owner's Manual

Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit
our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please con­tact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260
[phone] or [phone] when calling from outside of U.S.A.

Installation and Owner’s Manual
Manual de instalación y del propietario
Manuel d’installation et d’utilisation
Manual de Instalação e do Proprietário

Wide Spread Lavatory Faucet
Grifo de Amplia Distribución
Robinet à Large Écartement
Fenda Ampliada

GR

TLG02201U

GS

TLG03201U

2

ENGLISH

THANK YOU FOR CHOOSING TOTO!

The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.

Tools You Will Need.............................3

Specifications........................................3

Installation Procedure..........................4

Warranty................................................8

Rough-In Dimensions.........................30

Thanks for Choosing TOTO!...............2

Warnings...............................................2

Before Installation................................2

Care and Cleaning...............................2

Included Parts.......................................3

TABLE OF CONTENTS

WARNINGS

BEFORE INSTALLATION

For safe operation of the faucet, please observe the following:

Operating Pressure:

Minimum Pressure....................20 psi (138 kPa), dynamic

Maximum Pressure...................80 psi (551 kPa), static

Do not use the product at an ambient temperature below 32º F (0º C)

Observe all local plumbing codes.
Before installing the faucet, be sure to thoroughly flush the supply pipes of dirt

and debris.
Make sure the water supply is shut off at the stop valve.
Read these instructions carefully to ensure proper installation.
TOTO reserves the right to update product design without notice.

Your new faucet is designed for years of trouble-free performance. Keep it
looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as thes will dull the finish. Failure to
follow these instructions may void your warranty

CARE AND CLEANING

3

ENGLISH

INCLUDED PARTS

TOOLS YOU WILL NEED

SPECIFICATIONS

Water Supply Pressure

Minimum required: 20 psi (138 kPa) (Flowing)

Maximum allowed: 80 psi (551 kPa)

Water Supply Connection NPSM 1/2

Ambient Temperature 32~104°F (0~40°C)

Humidity Max. 90% RH

Flow Rate Maximum 1.2 gallon/min (4.5 L/min)

Aerator

Key

Drain Lift Rod

Spout Assembly

Handle Assembly (2x)

Valve Assembly (2x)

Drain Assembly

Adjustable

Wrench

Hex

Wrench

(2 mm)

Screwdrivers

Check to make sure you have the following parts indicated below:

4

ENGLISH

Valves

1. Thread a mounting nut to the bottom
of the valve. Place a washer and gasket as
shown.

NOTE: the hot water valve has a red
marking on side of body.

2. Pass the valve up through the
installation hole.
Insert the gasket and fasten the collar to
the valve body until it stops.

3. Fixate the valve by threading the
mounting nut up the valve until hand
tight. Tighten the retaining screws equally
to secure.

Do not overtighten!

4. Repeat steps 1-3 for remaining valve.

NOTE: Hoses to connect valve inlets to
water supply lines not included.

Spout

5. Pass the supply hoses and
mounting stud through the
mounting hole until the spout
comes to rest.

INSTALLATION PROCEDURE

Spout

Gasket
(Rubber)

Gasket
(Rubber)

Washer
(Metal)

Mounting
Nut

Collar

Form Gasket

Valve Body

Mounting
Screws

5

ENGLISH

INSTALLATION PROCEDURE

6. Orient the spout as needed. From
below the mounting surface, place
the crescent shaped gasket and
washer over the mounting stud as
shown.

Fasten the mounting nut to the stud
to secure the spout.

Tighten with wrench as needed.

7. Connect each hose to
the side port of each valve.
Tighten with wrench.

NOTE: If wrapping
the hose(s) in a loop is
needed, be careful not
to crimp the hose at any
point at this could restrict
the water flow.

Handles

8. Orient handle assembly and
lower onto the exposed portion of
valve until engaged.Fasten handle
escutcheon to collar with provided set
screw.
Repeat for other handle assembly.

NOTE: If handles do not line up
exactly as desired, remove handle
from valve and reinstall one (1) notch
over (on valve). Fine adjustment may
be done by slightly rotating valve
from underneath installed surface.

Washer
Spring

Washer

Mounting
Nut

Mounting
Stud

Set Screw

Handle
Assembly

Valve

Hose

Gasket

6

ENGLISH

INSTALLATION PROCEDURE

9. Insert the drain lift rod through
the opening in the spout.

Drain Lift
Rod

Insert the drain body up through
the drain hole from below the
lavatory. If necessary, turn the
nut and push the washer and
gasket (thick) down to allow for
clearance.
While holding the drain body in
place, fasten the flange to the
drain body from the top. Ensure
that the gasket (flat) is between
the flange and the lavatory as
shown. Once the flange is fully
seated, turn the nut below the
lavatory up until a good seal is
formed. Do not overtighten!

Reinsert the plunger if needed.

Drain

10. Remove the plunger, flange and gasket
from the drain assembly by unfastening
the flange and pulling these parts from the
drain.

Plunger

Flange

Gasket

Gasket (thick)

Washer

Nut

Body

Tailpiece Lever Hole

Plunger Hole

Lever Hole

Bushings Pivot Ball Nut

Pivot Arm

Short End Long End

7

ENGLISH

INSTALLATION PROCEDURE

Drain
Lift Rod

GR GS Series

Screw

Pivot
Arm

Drain Lift Rod
Connecting Part

11. Prepare the pivot arm by
placing one bushing on each side
of the pivot ball as shown. Insert
the short end of the rod into
the drain body and through the
eyelet hole in the plunger.

Fasten the pivot ball nut to
secure.

Insert the drain lift rod and
pivot arm into the drain lift rod
connecting part.

Tighten both rods with
screwdriver.

8

ENGLISH

WARRANTY

1. TOTO ers (“Product”) to be free from defects in
materials and workmanship during normal use when properly installed and serviced, for a period of three (3) years
from date of purchase. This limited warranty is extended only to the ORIGINAL PURCHASER of the Product and is
not transferable to any third party, including but not limited to any subsequent purchaser or owner of the Product.

This warranty applies only to TOTO Product purchased and installed in North, Central and South America.

2. TOTO’s obligations under this warranty are limited to repair, replacement or other appropriate adjustment, at
TOTO’s option, of the Product or parts found to be defective in normal use, provided that such Product was properly

sa snoitcepsni hcus ekam ot thgir eht sevreser OTOT .snoitcurtsni htiw ecnadrocca ni decivres dna desu ,dellatsni

ni strap ro robal rof egrahc ton lliw OTOT .tcefed eht fo esuac eht enimreted ot redro ni yrassecen eb yam
connection with warranty repairs or replacements. TOTO is not responsible for the cost of removal, return and/or
reinstallation of the Product.

5. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH VARY

FROM STATE TO STATE, PROVINCE TO PROVINCE OR COUNTRY TO COUNTRY.

6. To obtain warranty repair service under this warranty, you must take the Product or deliver it prepaid to a TOTO
service facility together with proof of purchase (original sales receipt) and a letter stating the problem, or contact
a TOTO distributor or products service contractor, or write directly to TOTO U.S.A., INC., 1155 Southern Road,
Morrow, GA 30260 [phone] or [phone], if outside the U.S.A. If, because of the size of the Product
or nature of the defect, the Product cannot be returned to TOTO, receipt by TOTO of written notice of the defect

esoohc yam OTOT ,esac hcus nI .yreviled etutitsnoc llahs )tpiecer selas lanigiro( esahcrup fo foorp htiw rehtegot

to repair the Product at the purchaser’s location or pay to transport the Product to a service facility.

THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY TOTO. REPAIR, REPLACEMENT OR OTHER APPROPRIATE

ADJUSTMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE ORIGINAL

PURCHASER. TOTO SHALL NOT BE RESPONSIBLE FOR LOSS OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL

OR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE ORIGINAL PURCHASER, OR FOR LABOR OR OTHER

COSTS DUE TO INSTALLATION OR REMOVAL, OR COSTS OF REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT

SPECIFICALLY STATED ABOVE. IN NO EVENT WILL TOTO’S RESPONSIBILITY EXCEED THE PURCHASE PRICE OF THE

PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT

OF MERCHANTABILITY OR FITNESS FOR USE OR FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. SOME

STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR

LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT

APPLY TO YOU.

3. This warranty does not apply to the following items:

b. Damage or loss resulting from any accident, unreasonable use, misuse, abuse, negligence, or improper

care, cleaning, or maintenance of the Product.

c. Damage or loss resulting from sediments or foreign matter contained in a liquid soap system.

ro/dna hsrah a ni tcudorP eht fo noitallatsni morf ro noitallatsni reporpmi morf gnitluser ssol ro egamaD .d

tion of the Product.

e. Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of

f. Damage or loss resulting from normal and customary wear and tear, such as gloss reduction, scratching or

fading over time due to use, cleaning practices or water or atmospheric conditions, including but not limited
to, the use of bleach, alkali, acid cleaners, dry (powder) cleaners or any other abrasive cleaners or the use
of metal or nylon scrubbers.

4. In order for this limited warranty to be valid, proof of purchase is required. TOTO encourages warranty registration
upon purchase to create a record of Product ownership at http://www.totousa.com is required. TOTO encourages
registration upon purchase and failure to register will not diminish you r limited warranty rights.

9

ESPAÑOL

¡GRACIAS POR ELEGIR TOTO!

La misión de TOTO es proporcionar al mundo estilos de vida saludables,
higiénicos y más cómodos. Diseñamos cada producto con el equilibrio de
forma y función como principio rector. Felicidades por tu elección.

Herramientas que va a Necesitar......10

Especificaciones.................................10

Procedimiento de Instalación............11

Garantía...............................................15

Bosquejo.............................................30

¡Gracias por elegir TOTO!...........9

Advertencias..................................9

Antes de la Instalacion..................9

Cuidado y Limpieza.......................9

Piezas Incluidas............................10

TABLA DE CONTENIDO

ADVERTENCIAS

ANTES DE LA INSTALACIÓN

Para un funcionamiento seguro del grifo, tenga en cuenta lo siguiente:

Presión operacional:

Presión mínima .................... 20 psi (138 kPa), dinámica

Presión máxima ................... 80 psi (551 kPa), estático

No use el producto a una temperatura ambiente inferior a 32º F (0º C)

Observe todos los códigos de plomería locales.
Antes de instalar el grifo, asegúrese de enjuagar a fondo los tubos de

suministro de suciedad y residuos.
Asegúrese de que el suministro de agua esté cerrado en la válvula de cierre.
Lea estas instrucciones cuidadosamente para asegurar una instalación correcta.
TOTO se reserva el derecho de actualizar el diseño del producto sin previo

aviso.

Su nuevo grifo está diseñado para años de rendimiento sin problemas.
Mantenga su aspecto como nuevo limpiando periódicamente con jabón
suave, enjuague bien con agua tibia y seque con un paño limpio y suave. No
use limpiadores abrasivos, lana de acero o productos químicos agresivos,
ya que éstos opacarán el acabado. El incumplimiento de estas instrucciones
puede anular la garantía

CUIDADO Y LIMPIEZA

10

ESPAÑOL

PIEZAS INCLUIDAS

HERRAMIENTAS QUE NECESITARÁS

ESPECIFICACIONES

Presión de suministro de agua

Mínimo requerido: 20 psi (138 kPa) (corriente)

Máximo permitido: 80 psi (551 kPa)

Conexión de suministro de agua NPSM 1/2

Temperatura ambiente 32~104°F (0~40°C)

Humedad Max. 90% RH

Flujo Maximo 1.2 gallon/min (4.5 L/min)

Llave del
Aireador

Vara de Desagüe

Ensamblaje de

salida para tina

Ensamblaje de Manija

(2x)

Ensamblaje de válvula

(2x)

Ensamblaje de Desagüe

Llave

Ajustable

Llave

hexagonal

(2 mm)

Destornilladores

Controle para asegurarse de que tiene las partes indicadas a continuación.