Toto CT708EVG01 Specifications
CT708E(G) & CT708EV(G)
IAPMO R&T
Wall-Mounted Flushometer Toilet, 1.28GPF when used with
High Effi ciency Flushometer Valve
FEATURES
• Wall-mounted outlet
• Elongated front bowl
• Optional CeFiONtectTM ceramic glaze - prevents
debris, and mold from sticking to ceramic surfaces,
leading to fewer chemicals and less water in
cleaning.
MODELS
• CT708E
Commercial wall-mounted toilet with 1-1/2' top
spud inlet, less seat
• CT708EG
Commercial wall-mounted toilet with 1-1/2' top
spud inlet, less seat with CeFiONtect ceramic glaze
• CT708EV
Commercial wall-mounted toilet with 1-1/2' back
spud inlet, less seat
• CT708EVG
Commercial wall-mounted toilet with 1-1/2' back
spud inlet, less seat with CeFiONtect ceramic glaze
ADDITIONAL ITEMS
• SC534 seat
• SC134 seat
• THU111 Retro-fi t mounting bolt cap set (4 pcs)
CeFiONtect
PRODUCT SPECIFICATION
The wall-mounted, low consumption siphon jet
fl ushing system toilet shall be 1.28GPF/4.8LPF
when paired with a 1.28GPF fl ushometer valve and
1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF
fl ushometer valve. Toilet shall have optional
CeFiONtect ceramic glaze. Toilet can be mounted
at ADA height. Toilet shall be elongated front bowl.
Toilet shall be TOTO Model CT708E______.
FLUSH VALVES
EcoPower
TET1LA32#CP 1.28GPF TMT1LN32#CP 1.28GPF
TET1GA32#CP 1.6GPF TMT1NNC-32 1.6GPF
TET2LA31#SS 1.28GPF
TET2GA31#SS 1.6GPF
TET3LA31#SS 1.28GPF
TET3GA31#SS 1.6GPF
TET6LA32#CP 1.28GPF
TET6GA32#CP 1.6GPF
®
Manual
COLORS/FINISHES
• #01 Cotton
CODES/STANDARDS
• Meets and exceeds ASME A112.19.2/CSA B45.1
• Certifi cations: IAPMO (cUPC), State of Massachusetts,
City of Los Angeles, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA Compliant
Certified by
CT708E(G) & CT708EV(G)
(229mm)
(
(162mm)
(285mm)
(323mm)
Finished Wall (Must be flat surface)
(229mm)
(
(162mm)
Finished Wall (Must be flat surface)
1" N.P.T. supply for
Flushometer valve
Top and Bottom mounting
surfaces must be in
the same vertical plane.
finished wall
Proper Installation Improper Installation
Ø Uneven Wall Gap
Baseboard
Top and Bottom mounting
Wall-Mounted Flushometer Toilet, 1.28GPF when used
with High Efficiency Flushometer Valve
SPECIFICATIONS
• Water Use 1.28GPF/4.8LPF
(or 1.6GPF/6.0LPF when
used with 1.6GPF flush
valve)
• Flush System Siphon jet flushing action
• Min. Water Pressure 35 psi (flowing)
• Min. Flow Rate 23 GPM
• Water Surface 12" x 9-1/4"
• Trap Diameter 2-1/8"
• Trap Seal 2-5/8"
• Warranty One Year Limited Warranty
• Material Vitreous china
• Shipping Weight CT708E(G) - 49lbs
CT708EV(G) - 53.5lbs
• Shipping Dimensions CT708E(G)
17-1/8"L x 16" W x 26"H
CT708EV(G)
15-1/2"L x 15-1/2" W x 26-3/8"H
5-1/ 2"
140mm)
2- 3/4"
(70mm)
1/16"
(1.7mm)
Wall
Gap
*6-3/8"
18-1/ 2" (470mm)
24- 7/8" (632mm)
Finished Floor
(432mm)
*16"
(406mm)
*17"
12- 3/4"
(323mm)
(121mm)
1-1/2"
(38mm)
CT708E(G)
*Suggested
Dimension
*4- 3/4"
15- 3/8" (390mm)
INSTALLATION NOTES
• Spuds are unique for TOTO product. For
replacement spuds, contact TOTO for part number
THU073R
11-1/2"
(292mm)
2- 3/8"
(59mm)
(190mm)
Wall
7-1/ 2"
Steel
Washer
1-7/8"
(48mm)
China
Rubber Washer
(supplied)
Standard
bolt cap
Note: If carrier bolt doesn’t extend/or is
flush with china, then use retrofit caps
THU111 (sold separately).
Retrofit
bolt cap
China
Wall
finished wall
Installation surface of bowl
has 1/16” wall gap
across entire surface.
18-1/ 2" (470mm)
5-1/ 2"
140mm)
1/16"
(1.7mm)
Wall
Gap
11-1/4"
*6-3/8"
24- 7/8" (632mm)
Finished Floor
3-7/8"
(99mm)
*17"
(432mm)
*16"
(406mm)
9"
CT708EV(G)
*Suggested
Dimension
15- 3/4"* (400mm)
9"
finished wall
Ø Uneven Wall Gap
surfaces must be in
3-1/2"
(90mm)
2-3/8" (59mm)
7-1/2"
12- 3/4"
(190mm)
the same vertical plane.
Baseboard
These dimensions and specications are subject to change without notice
# SS-00210 v.11Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
Loading...