Toto ABA991X01FCP Specifications
FEATURES
• Extra thick cast acrylic construction
• HydroHands™ massaging air jets
• 1hp blower
• 300W heated air injection system
• 2 cascading shoulder warmers
• Cascading spout
• 9.1gal/min. max filling
• Hand held shower
• 2 underwater lighting modules
• LED lights
• Air Bath mainbody with pillows
• Push button controller stand with audio guide
• 151 gallon capacity
COLORS/FINISHES
• Shell Color
#01 Cotton
ABA991X#01FCP
Neorest® Air Bath™ SE
CODES/STANDARDS
• Meets and exceeds ASME A112.19.7M, CSA
B45.10, UL 1795, CSA C22.2 #218.2
• Certifications: IAPMO(cUSPC), Intertek/ETL, State
of Massachusetts, City of Los Angeles and others
• Code Compliance: USPC, IPC, NSPC, NPC Canada,
and others
• Trim
#CP Polished Chrome
• Push button with audio guide trim
#CP Polished Chrome
PARTS
• Neorest Air Bath mainbody with pillows
(70-7/8” x 55-1/8” x 30-1/8")
• Function module (16-5/8" x 7-1/8" x 18-3/4").
120 VAC, 60Hz, 14.3 A rated.
Hot and Cold water inlet and
Fill Air Bath outlet are NPT 3/4
• Controller stand (9-5/8" x 4-1/2" x 10")
• 15 m Connecting Cables
PRODUCT SPECIFICATION
The Neorest® Air Bath shall have an extra thick cast
acrylic construction, 15 individual air jets, 1hp blower,
and a 300W heated air injection system. The Air Bath
shall have 2 cascading shoulder warmers, a cascading
faucet and a 9.1gal/min. max filling. The Air Bath shall
also include a hand held shower, 2 underwater lighting
modules and two LED lights. The Air Bath shall provide
a push button controller stand with audio guide, a
mainbody with pillows and a 151 gallon capacity.
Air Bath shall be TOTO Model ABA991X___ ___.
ABA991X#01FCP
Neorest® Air Bath™ SE
SPECIFICATIONS
• Size 70-7/8"L x 55-1/8"W x
30-1/8"H
• Warranty Three Year Limited Warranty
• Material Acrylic tub, brass faucets
• Shipping Weight 883 lbs.
• Shipping Dimensions 59-1/4"L x 96"W x 40-1/2"H
INSTALLATION NOTES
Refer to the Installation Manual for instructions.
Supply Equipment Specifications:
• Supply pressure 29-108.75psi (0.20-0.75 MPa)
• Supply temperature 140º-158ºF (60º-70ºC)
• Hot water usage:
Max. temperature 113ºF (45ºC)
Max. flow rate 9.2 gal/min (35L/min)
Max. capacity 151 gal (570L)
• Hot/Cold water inlet and Fill Air Bath outlet are NPT 3/4.
A tankless water heater is recommended. Hot water supply
should be 75% of capacity or greater. Actual hot water
needed will depend upon total system needs.
Floor support under bath must provide a minimum of 85 lbs/
square foot (415 kg/square meter) loading.
70 7/8" [1800mm]
9 11/16" [246mm]
55 1/8" [1400mm]
35 7/16" [900mm]
9 13/16" [250mm]
3 1/8" [80mm]
30 1/8" [765mm]
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
#SS-00999, v.03
Loading...