TotalPond UW16200 User Manual
PACKAGE CONTENTS
Questions, problems, missing parts?
A
B
C
ITEM # UW16200
Pond and Landscape Light Kit
REMINDER
CALL 1-888-412-6001
BEFORE RETURNING TO STORE.
Part Description Quantity
A Light w/ sensor 1
B Transformer 1
C Color lenses 4
retailer, call our customer service department at
1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@geoglobalpartners.com. Or visit our
website www.totalpond.com.
Before returning to your
WARNINGS AND CAUTIONS
WARNING
• To reduce the risk of electrical shock, connect only to a properly grounded, grounding type receptacle
(GFCI).
• Do not exceed the voltage shown on the transformer.
• Do not submerge the transformer and sensor.
• To reduce the risk of fire or injury, keep lamp away from materials that may burn.
• Always disconnect light from the power source before beginning any maintenance or work on the light.
• Inspect cord for damage before installation and/or maintenance. Replace the entire light/transformer
assembly if damage is found.
CAUTION
• Use a proper power source as indicated on the transformer label.
• Keep the cord away from high temperatures or other heat sources.
• Do not lift the light or the transformer by its power cord.
• This light assembly is not intended for use in swimming pools or hot tubs.
1
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with
ASSEMBLY INSTRUCTIONS
Sensor
Plug from
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
• Estimated Assembly Time: 5 minutes
• No tools required for assembly.
1. Connect the sensor to the transformer by pushing the plug
into the transformer socket until it is firmly seated. Hand
tighten the nut from the plug to the socket. Fig. 1
Fig. 1
2. Place the lights in or out of the water. Make sure that the
transformer and sensor are NOT submerged. Make sure that
the light sensor faces up. Fig. 2
NOTE: At night, the lights will automatically turn on.
At sunrise, they will automatically turn off.
3. Plug the transformer into a properly grounded electrical outlet.
Fig. 3
Transformer
sensor
(Must face up)
Fig. 2
GFCI
Fig. 3
2
Loading...