TotalPond PVC12005 User Manual
PACKAGE CONTENTS
PREPARATION
NOTES
INSTALLATION
INSTRUCTIONS
Quest
ions, problems, missing parts?
ITEM # PVC12005
7 ft. x 10 ft. Pond Skins
REMINDER
CALL 1-888-412-6001
BEFORE RETURNING TO STORE.
to your retailer, call our customer service department at
1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or
email us at customercare@geoglobalpartners.com. Or
visit our website www.totalpond.com.
Before returning
Part Description Quantity
A Liner 1
Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement parts.
• Estimated Assembly Time: 2 hours
• Tools Required for Assembly: Garden hose, Shovel.
Calculate the dimensions of your pond. Your pond should be at least 18in. deep at the deepest point.
Allow for a 10 in. overlap around the perimeter of the pond. The 7 ft. x 10 ft. liner will create a pond that is
approximately 3 ft. x 6 ft. x 18in.deep. It will hold approximately 200 gal. of water.
1. Use sand to mark the outline of your pond. Fig. 1
Fig. 1
1
2. Dig out your pond and remove and debris or rocks that might
damage your liner. Add approximately 2in. of sand to the
pond area. The sand functions as a cushion beneath your
pond liner. Spread the sand over the entire area and
compact it. Fig. 2
Fig. 2
3. Open the liner and drape it across the pond area, making
sure to leave at least 10in. of overlap around the perimeter of
the hole. Begin to fill the pond with water, smoothing out any
wrinkles as you do this. Fig. 3
Fig. 3
4. When the pond is full, bury the excess liner in a small trench
around your pond with stones and rocks, according to your
landscape design. Fig. 4
Fig. 4
Printed in China
2
Loading...