Page 1
PACKAGE CONTENTS
PREPARATION
Questions, problems, missing parts?
ITEM # PF850
Pressurized Filter
Up to 850 gallons
REMINDER
CALL 1-888-412-6001
BEFORE RETURNING TO STORE.
to your retailer, call our customer service department at
1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or
email us at customercare@geoglobalpartners.com. Or
visit our website www.totalpond.com.
Part Description Quantity
A Tank 1
B Cover 1
C Lid 1
D O-ring 1
E Adapter 2
F Gasket 2
G Locking ring 2
H Tube 2
I Bio media balls 12
J Small filter 1
K Coarse filter 1
L Fine filter 1
Before returning
C
B
J
D
A
I
H
E
F
G
K
L
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement parts.
• Estimated Assembly Time: 20 minutes
• No tools required for assembly.
1
Page 2
ASSEMBLY INSTRUCTIONS
1. Assemble the tube, gasket and adapter. Insert the adapter
and gasket into the outlet of the tank (lower hole). Fix it in
place with the locking ring. Fig. 1
Fig. 1
2. Slide the small filter onto the tube. Fig. 2
Fig. 2
3. Place the bio balls into the bottom of the tank. Fig. 3
Fig. 3
Tube
Gasket
Adapter
Locking ring
Small filter
Bio balls
2
Page 3
4. Place the fine filter pad inside the tank. Then place the
Coarse
Locking
coarse filter pad over the fine filter pad. Fig. 4
NOTE: The coarse filter pad is black. The fine filter pad is
blue.
Fig. 4
5. Assemble the tube, gasket and adapter. Insert the adapter
and gasket into the inlet of the tank (upper hole). Fix it in
place with the locking ring. Fig. 5
Tube Gasket
ring
Fig. 5
6. Turn over the cover and locate the groove. Place the o-ring
into the groove. Fig. 6
D
B
Fig. 6
Filter
Fine
Filter
Adapter
3
Page 4
7. Place the cover (with the o-ring attached) over the top of the
tank. Fig. 7
Fig. 7
8. Screw the lid onto the top of the tank. Make sure that it is
secure, or the filter will leak. Fig. 8
Fig. 8
9. Connect a length of tube from the outlet of a pump to the inlet
of the filter (upper hole). Connect a length of tubing from the
outlet of the filter (lower hole) to a water feature. Fig. 9
NOTE: Pump and tubing is NOT INCLUDED. The adapter is
compatible with 1/2 in. or 3/4
Fig. 9
in.
tubing.
Cover
Tank
Lid
Tank
In
Out
4
Page 5
CARE AND MAINTENANCE
• Occasional cleaning of the filter pads will be necessary to ensure the proper functioning of the
REPLACEMENT PARTS LIST
A
B
C
D
E
F
G
H
system. The top filter pad is a coarse pad (black) and will catch larger particles. The bottom filter
pad (blue) is a fine pad designed to trap smaller debris. Both pads should be removed and washed
with clean water when they are visibly soiled.
•
Filter pads should be replaced annually. Use TotalPond Replacement Filter Pads item # RF13026.
• Filter pads should be changed annually. The exterior surface of the filter box may also need
occasional cleaning. Do not use any chemicals that may destroy the beneficial bacteria.
• The bio balls in you filter system and the inside surfaces of the filter box contain the beneficial
bacteria. At least once a year the entire system should be disassembled and cleaned thoroughly
using warm, soapy water (biodegradable soap). This should not be done during the warm season
as it may take up to 8 weeks to re-establish the environmental balance. The best time of the year to
“breakdown” your system is in early spring before the water temperatures begin to rise. This is also
the ideal time to replace the filter pads.
For replacement parts, call our customer service department
at 1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday.
Part Description
A Tank
B Cover
C Lid
D O-ring
E Adapter
F Gasket
G Locking ring
H Tube
TotalPond replacement filters can be purchased at
Home Depot, item #RF13026.
Printed in China
5
Page 6
LIMITED WARRANTY
All pumps and electrical products are warranted to the user against defective material and workmanship,
under normal working conditions. This warranty period begins on the date of purchase by the original
purchaser.
All TotalPond® electrical products are warranted to the user against defective material and workmanship,
under normal working conditions for 1 year from the date of purchase. All TotalPond® liners are warranted
to the user against defective workmanship, under normal working conditions for 20 years from the date of
purchase. All other TotalPond® product is warranted to the user against defective material and
workmanship, under normal working conditions for 90 days.
Application
Warranty covers only properly installed and maintained units. Pump warranty is limited to applications
pumping fresh water in a pond or fountain only. Other liquid applications or extreme temperature uses
must be approved in writing by the manufacturer. Receipt and product date code are required for warranty
claims.
Warranty Claim
Warranty claims must be made by calling customer service (at 1-888-412-6001). If the item is
determined to be defective, you will be given authorization to return the defective part(s), freight pre-paid,
along with proof of purchase.
Disposition
The manufacturer will make a good faith effort for prompt disposition regarding all warranty claims.
Returned product will be inspected to determine cause of failure before warranty is applied. Warranty does
not cover any costs associated with the shipping, handling, installation or removal of products or parts
subject to this warranty. For products damaged in transit, a claim should be filed with the carrier.
Disclaimer
Any oral statements made about the product by the seller, the manufacturer, the representatives, or any
other parties do not constitute warranties, should not be relied upon by the user, and are not part of the
contract for sale. The seller’s and manufacturer’s only obligation, and buyer’s only remedy shall be for the
manufacturer to either replace and/or repair at the manufacturer’s sole discretion, the product as described
above. Neither seller nor the manufacturer shall be liable for injury, loss or damages for lost profits, lost
sales, injury to person or property, or any other incidental or consequential loss arising from any cause
whatsoever, no matter whether based upon warranty, contract, negligence or other misuse, and the buyer
and user agree that no other remedy shall be available to them. Before using, the buyer and user shall
determine the suitability of the product for the intended use, and assume all risk and liability whatsoever in
connection therewith. The warranty and remedy described in this limited warranty is an exclusive warranty
and remedy in lieu of any other warranty or remedy expressed or implied. All other warranties and
remedies are hereby expressly excluded, including but not limited to any implied warranty of
merchantability of fitness for any particular purpose. This warranty gives the buyer and user specific legal
rights, and buyer and user may also have other rights which vary from state to state. Some states do not
allow exclusions or limitations of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
REMINDER
CALL 1-888-412-6001
BEFORE RETURNING TO STORE.
6
Loading...