TOTALINE Thermostat Homeowner's Manual

.Outdoor T&mperatu'.
Oisplay shows the
outdoor temperature

...

'Eneroy Savlnot IndIcator
lights up when system is
operating at maximum

efficiency.

.-,

~51red T~turt
DIsplay shows the desired

...temperature sening on the

.##~LCDreadout.

F.n Button chooses
between ON or AUTO
fan operatioQ

'"

...

--.Room Temperature

---Display shows the current
room temperature on the
LCD readout

~ .Trouble IndIcator alerts

you when the system needs
professional service

~wt FIIIM But1Of1
restar1s the timer that.. "
determines the next air
filter change or

cleaning

,

Mode But10n selects' ~ " ~ Up and Down Buttont
between OFF HEAT Increase or decrease the

COOL, and AUTO' , desired lemperature

operation Heat pump ' ,6.. ...senlng

thermostat models. Auxiliary Heat Indicator lights up Clean FItter Indl<:.8tor leIs you
include an EMER. when a heat pump syslem's auxiliary know il IS lime 10 clean or replace
GENCY HEAT mode heat is on. your system's air filler

NOTE No1 all messages displayed In the above IllustratIon W111 awear at once in any SIluation

A\lallable on selec1ed n'(xjels

.1
.2
.3
.3
.4

.5

.6

.7

.8

.9

SETTING AND OPERATING THE

THERMOSTAT

Setting your indoor temperature set points

Setting the fan operation Setting the mode operation Checking the outdoor temperature Clean filter feature. AUTO CHANGEOVER

WHAT IF...

The auxiliary heat indicator is displayed

The clean filter indicator is displayed You have a power outage You have a system error message Warranty Common Terms and Where to Find Them

Setting your indoor temperature
set points

which temperature set point is being
displayed.

1 ~'J Press the UP or DOWN

button .
The LCD readout will be illuminated
and the heating or cooling temperature
set point will be displayed, but will not

change. Next to the temperature
display, HEAT or COOL indicates

2 v Continue to press the UP
or DOWN buttons until your desired
heating or cooling temperature set
point is displayed.

previously set temperature to maintain that
2° difference.

MODE

8

Setting fan operation

FAN

3 Press the MODE
button to select the second temperature
setting {either HEAT or COOL).

4 v Press the UP or DOWN
buttons until your second desired
temperature set point is displayed

NOTE: Your COOL .setting must be at lea.st
2° higher than your HEAT setting. Your
thermostat will automatically chanRe your