TOTALINE 1 For All, P374-1100, 1 For All P374-1100 Owner's Manual
OWNER'S MANUAL
1 For All
Programmable
Digital Thermostat
7 Day Programmable
4 Time Periods per Day
Am
6:03
Su
AUTO
68
TOTALINE
Use with most Air Conditioning & Heating Systems including: 1 or 2 Stage
Electric Cooling & Gas Heating, Heat Pump, Electric or Hydronic Heat.
o
70
COOL
HEAT
o
67
Meets Residential California Title 24
Large, Easy To Read Display
Thermoglow Backlight
Very Easy to Program
Programmable Fan
No Batteries Required
Outdoor Temperature
Sensor Available
P374-1100
Replacement Components Division Carrier Corporation 12/01
TOTALINE
Table Of Contents
FRONT PANEL
DISPLAY
QUICK START Set the clock and go
BASIC OPERATION
PROGRAMMING 4 Time Periods
ADVANCED SETUP
ABOUT ADVANCED OPERATION
WARRANTY
CAUTION
Follow Installation Instructions before proceeding.
SET THERMOSTAT TO MODE “OFF” PRIOR TO
CHANGING SETTINGS IN SETUP OR RESTORING
FACTORY DEFAULTS.
Replacement Components Division Carrier Corporation 12/01
P/N P374-1100
2
3
5
6
8
12
17
23
Page 1
Front Panel
Backlit LCD Display
Am
6:03
Su
AUTO
68
TOTALINE
70
67
o
COOL
HEAT
o
Warmer or + Button
Cooler or - Button
Mode Button
Heat or Cool Indicator
Red = Heat, Green = Cool
Programmable
Thermostat
o
70
COOL
HEAT
o
67
SET CLOCK
PROGRAMVACATIONOUTSIDEFAN MODE
PROGRAMVACATION
SET CLOCKOUTSIDE
FAN
6:03
S
AUTO
Am
68
Page 2
Display
2
9
1
6
8
:
12:00
SMTWTFS
Service
Filter
AUTO
Night
OFF
Morning
Evening
Fan On
Day
1
Am
Pm
11
Program
Start
10
On
Setup
Locked
88
7
88
Outside
88
COOL
HEAT
o
o
4
1
5
1
4
1
Mode Indicators
Selects the operation mode of the equipment.
HEAT - indicates the heat mode.
COOL - indicates the air conditioning mode.
AUTO - indicates the system will automatically
changeover between heat and cool modes
as the temperature varies.
OFF - indicates the entire system is turned off.
PROGRAM ON - indicates the stored program
is enabled to run. Page 8.
2
Clock with Day of the Week
Indicates the current time and day. This clock is
also used to program the timer periods. Page 5.
3
Room Temperature Display
Indicates the current room temperature.
4
Desired Set Temperature
Indicates desired room temperature(s). Page 7.
3
Page 3
Display
5
6
7
8
9
10
Outside Indication
Indicates the temperature displayed is from
the optional outside sensor. Page 21.
Morning, Day, Evening & Night Indication
Indicates the program time period. Page 8-11.
Setup Indication
Indicates the thermostat is in the programming
mode. Page 12.
Fan Operation Indication
Fan On - indicates constant, continuous fan
operation.
When Fan On is not lit - indicates the fan will
only operate when necessary to heat or
to cool. Page 7.
Service Filter Indication
Service Filter indicates when the filter should
be serviced under normal conditions.
Appears after 0 - 1950 hours of blower
operation (adjustable). Page 15.
Locked Indication
Locked appears after the right combination of
buttons are pressed, rendering the buttons
inoperative. Page 22.
11
Start Indication
Start appears when programming
timer functions. Page 8.
Page 4
Quick Start Set the Clock and Go
SET CLOCK
Press the SET CLOCK
button.
:
12:00
S
Am
Setup
Setup
Press the SET CLOCK
i
2
SET CLOCK
During Setup & Programming:
Pressing the Up and Down
buttons will modify the flashing
selection.
.
(Represented in dark black)
Press
MODE
To adjust the
clock or Day use
buttons.
button as above to
return to normal
operation.
This thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
Page 5
Basic Operation
Select Mode
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
AUTO will automatically select
heat or cool based on room
temperature demand.
Program On will activate the
stored timer operation.
(Morning, Day, Evening
& Night Periods)
OFF indicates both heating
and air conditioning
systems are turned off.
:
12:00
M
:
12:00
M
:
12:00
M
AUTO
:
12:00
M
:
12:00
M
OFF
Pm
70
Pm
70
Pm
70
Program
Pm
Day
70
Pm
70
HEAT
o
69
o
72
COOL
o
72
COOL
HEAT
o
69
73
COOL
HEAT
o
o
On
70
Press
MODE
Press
MODE
Press
MODE
Press
MODE
Page 6
Basic Operation
Select Desired Temperature
:
M
AUTO
Pm
12:00
70
Pressing the Up or Down buttons in Auto mode will adjust both the heat and cool
set temperatures simultaneously.
Pressing the Up or Down buttons in Heat or Cool modes will adjust only the
heat or cool set temperature.
Fan
Operation
:
S
Fan On
Pm
65
12:00
FAN
72
COOL
HEAT
69
Press
85
COOL
HEAT
55
o
o
o
Fan On indicates constant fan operation.
This feature is active even if the thermostat
o
is set to Off.
In any mode, adjust the
desired Set Temperature
with
buttons.
Page 7
Loading...