TOTALINE 1 For All, 1 For All 474-010 Owner's Manual
OWNER'S MANUAL
P/N P474-0100
1 For All
Non-Programmable
Digital Thermostat
TOTALINE
COOL
AUTO
76
HEAT
68
Meets California Title 24
Use with most Air Conditioning & Heating Systems including: 1 or 2 Stage
Electric Cooling & Gas Heating, Heat Pump, Electric or Hydronic Heat.
Dual Setpoint
Very easy to program
Thermoglow Backlight
No batteries required
Auto-Changeover
Locking Keypad
TOTALINE
Replacement Components Division Carrier Corporation 12/06
Table Of Contents
FRONT PANEL
DISPLAY
2
3
SELECTING THE HEAT
OR COOL MODE
BASIC OPERATION
ADVANCED SETUP
4
5
6
ABOUT ADVANCED FEATURES
& OPERATION
WARRANTY
CAUTION
Replacement Components Division Carrier Corporation 12/06
Follow Installation Instructions carefully.
DISCONNECT POWER TO THE HEATER AIR CONDITIONER BEFORE REMOVING
THE OLD THERMOSTAT AND INSTALLING
THE NEW THERMOSTAT.
10
14
WARNING
P/N P474-0100
Page 1
Front Panel
TOTALINE
COOL
AUTO
76
HEAT
68
Liquid Crystal Display
with Thermoglow
Up/Down Buttons
Mode Button
Fan Button
Heat or Cool Indicator
Red = Heat, Green = Cool
Page 2
Display
AUTO
COOL
88
HEAT
OFF
Mode Indicators - Page 4
Selects the operational mode of the equipment.
HEAT - Indicates the heating mode.
COOL - Indicates the air conditioning mode.
AUTO - Indicates the system will automatically
changeover between heat and cool modes
as the temperature varies.
OFF - Indicates heating and cooling are turned off.
Room Temperature Display
Indicates current room temperature.
Desired Set Temperature - Page 5
Indicates desired room temperature(s).
Fan On icon - Page 5
Indicates constant, continuous fan operation.
When Fan On is not lit - indicates the fan will only
operate when necessary to heat or to cool.
Fan On
88
Page 3
Selecting the Heat or Cool Mode
Select Mode by Pressing the MODE Button
Heating Only
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
HEAT
68
Press
MODE
Cooling Only
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
Heating or Cooling
AUTO will automatically select
heat or cool based on room
temperature demand.
Off
OFF indicates both heating
and air conditioning
systems are turned off.
Page 4
AUTO
OFF
COOL
76
COOL
76
HEAT
68
Press
MODE
Press
MODE
Loading...