Tosumi TOM1003, L15D2-A0 User Manual
USER'S MANUAL
15"17"20"LCD TV
TFT-LCD TV High Brightness & Contrast NICAM/A2 Stereo Sound
MODEL:TOM1003
Please read this manual carefully before
using your television and keep this manual
in a safe place for future reference.
To users:
CONTENT
Before connecting the LCD-TV and turning the power on, please read
this book carefully. Please keep this book for later use. If the Tv stops
working it may be because of Electrostatic charge. Turn the set off
completely and wait a few moments before turning it on again.
Thank you for using our LCD-TV. After unpacking, please check that you
have the following items: Operating instructions, Remote control, AC/DC
adapter, AC Mains lead, and Batteries.
Safety Notice Items.........................................................................................1
Main Functions................................................................................................1
Front Panel Controls........................................................................................2
Connection Options.........................................................................................3
Remote Control Key Functions........................................................................4
Installing Batteries.......................................................................................5
Connection Instructions...................................................................................6
External equipment Connections.................................................................6
Antenna Connection....................................................................................6
Basic Operating Instructions............................................................................7
Turn on the LCD-TV.....................................................................................7
Select the TV Channel You Want................................................................7
Picture Mode...............................................................................................7
Tuning TV stations.......................................................................................8
Manual Tuning.............................................................................................8
Auto Tuning..................................................................................................8
TV Menu Options Continued.......................................................................9
Functions.....................................................................................................9
Menu Operations...........................................................................................10
Picture Menu Options................................................................................10
Picture Menu Options Continued...............................................................11
PC Mode....................................................................................................11
Sound Menu Options.................................................................................11
Sound Menu Options Continued...............................................................12
General Menu Options..............................................................................12
General Menu Options Continued.............................................................13
TELETEXT.....................................................................................................14
Teletext Continued.....................................................................................15
Connection Instructions.................................................................................16
PC Setup...................................................................................................16
VCR Setup.................................................................................................17
Cable TV Setup.........................................................................................18
External AV Source Setup.........................................................................18
Help Guide.....................................................................................................19
Specifications................................................................................................20
Safety Notice Items
Main Functions
"DO NOT LEAVE YOUR TV IN STAND-BY OR OPERATING WHEN YOU LEAVE THE HOUSE”
Incorrect use may cause fire or electric shock. To prevent this, please do as
required when you are installing, using and cleaning this machine. To insure
your safety and extend the life-span of LCD-TV, please read the following items
carefully before using:
l
l
l
l
l
l
l
l
l
l
l
Please read and understand all the instructions before operation;
Please keep the book in a safe place for later use;
Please comply with the warning instructions on the Tv and in this book strictly;
Please do not use additional devices that are not recommended by
manufacturer:
Before operation, please make sure that the mains supply corresponds to the
operating voltage of your Tv.
Do not allow the DC lead to become damaged or trapped, place it so that it
cannot be tripped over or stepped on.
Do not place the unit on an unstable surface.
Do not allow to get dusty or wet.
Never put the unit in direct sunlight or near heat sources;
Allow enough space for proper ventilation;
Please keep water away from the appliance. If water comes into contact with
the LCD-TV, disconnect the power cord from the power source, then wipe the set
with a dry soft cloth; DO NOT OPERATE UNTIL CHECKED BY AN AUTHORISED
TECHNICIAN
Do not remove the back cover. There are NO user serviceable parts inside.
The warranty will be invalid if the back cover is removed. If serviceis required,
please refer to a qualified technician.
1- May be connected to an analog RGB PC Output (VGA)
2- May be connected with CVBS,S-VIDEO , and SCART (CVBS/RGB)
inputs
3- Receives Terrestrial Analog TV signals
The crossed out " Wheelie bin" is intended to show that this
appliance must no be placed with ordinary house hold waste.
When this appliance has reached the end of its useful life. It
must be disposed of in accordance with local by-laws. Consult
your local waste disposed authority.(WEEE Directive)
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock of persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
Front Panel Controls
Control Panel Functions
TV/AV MENU VOL- VOL+ CH- CH+ POWER
1 2 3 4 5
6
7
1.TV/AV Select the input signals: SCART/PC-RGB/AV/S-VIDEO/TV
2. MENU Press to select the main menu
3. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL + Volume up / Right orientation to adjust the item/Press to
enter the submenu.
4. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
5. Power supply switch
6. Power indicator
Illuminates red in standby mode, illuminates green when the display is
turned on
7.Remote Sensor Receiving remote control signals from the
Remote Control Handset
SCARTD-SUB IN
S-VIDEOHEADPHONE
DC IN
PC AUDIO IN
ANT
AUDIOVIDEO
L
R
AV Audio Input
Connect audio/video
output from an external
device to these jacks
DC Power Cord Socket
This TV operates on DC power.
The voltage is indicated on the
Specifications page . Never
attempt to operate the TV on AC
power.
D-SUB Input
Connect to the D-SUB
15PIN analog output
connector of the PC
display card for PC
display purpose
S-Video Input
Connect S-Video output
from an S-Video device
to the jacks.
Antenna Input
Connect cable or
antenna signals to
the TV, either directly or through your
cable box.
Connection Options
Earphone port
PC Audio Input
Connect the PC output
connector from a PC to
the audio input port
SCART Input
Connect to the DVD/
VCR/broadcasting
receiver or other
equipment
The figure is just for referrence, please see the real.)
Remote Control Key Functions
When using the remote control, aim it towards the remote sensor on the TV
1.
Power supply switch
2. MUTE
MUTE
3. DISPLAY
Display current input signal information
4. 0-9
TV channel number select
6. NICAM
NICAM/A2 Stereo select
7. OK
EXIT
8. Q.VIEW
Quick TV channel switch (return to the last channel)
11. TV/AV
Select SCART/PC-RGB/AV/S-VIDEO/TV
9. V-
Volume down / Left orientation to adjust the item in the OSD
Volume up / Right orientation to adjust the item/Press to
enter the submenu.
10. P+/P-
TV channel up/down or select the item of the menu
Illustration of the keys on the remote control:
POWER
5. SLEEP
Set time to change the TV into the standby status after a
period of preset time.(time is 240/180/120/90/60/45/30/15/0)
V+
12. PSM
Select picture mode: PERSONAL/STANDARD/MILD/FRESH
P+
P-
V- V+
SLEEP DISPLAY MUTE POWER
NICAM PC AUTO AD TV/AV
PSM .SSM
OK Q.VIEW
MENU
INDEX TEXT
TIME HOLD SIZE REVEAL
SUBTITLE MIX
Select sound mode:VOICE/MUSIC/THEATRE/PERSONAL
28. AUTO AD
Auto adjust (PC mode)
16. CYAN
17. GREEN
18.YELLOW
19. TEXT
Switch to the Teletext with text mode/turn off Teletext and
switch to TV mode
15. RED
Remote Control Key Functions
13. PC
PC-RGB system select
14. SS
M
T
E
L
E
T
E
X
T
Correspond to the differently colored subjects
20. HOLD
Hold on or off for current page display
21. MIX
Switch to the Teletext with mix mode
22.INDEX
Request index page
23.SIZE
Change display size
24.SUBTITLE
Sub coded page access
25.TIME
26.REVEAL
Reveal or hidden the hidden words
Installing Batteries
Note:
27. MENU
Press to select the main menu
While in normal TV mode only, pressing the button TIME will
display the teletext time in the top right corner for a few
seconds.
3
2
1
The buttons on the Tv :-( MENU , VOL+/- , CH+/- , TV/AV,POWER) correspond
with buttons ( MENU, V+/- , P+/- , TV/AV , POWER ) on the remote controller.
1.Slide open the cover of the battery compartment on the back of the remote
control.
2.Load two "AA" alkaline batteries in the compartment. (plus and minus poles
to respective marks)
3.Replace the cover of the battery compartment.
4. Dispose of worn out batteries safely. Do NOT break open or throw on a fire.
Loading...