TOSPO Electronics TP1432 Users Manual

U

SER’S MANUAL

This light device has been tested and found to comply with the limits for

consumer RF Lighting device, pursuant to Part 18 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation.

1. Use only on 120 volt 60 hertz.

2. Never disassemble or modify any changes could void the user’s authority to

operate this device.

3. Type I outdoor use.

4. Class P thermally protected.

5. Disconnect line voltage before installing or replacing. Ballast case must be

grounded.

6. This product could produce interference when used near a TV, radio,

wireless remote control or maritime safety communications equipment or

other critical navigation or communication equipment operating between

0.45-30MHZ. If interference should occur, move the lamp away from the

appliance a distance of three feet or more. Or, plug the lamp or the

appliance into a different outlet.