Toslink 1x2 S/PDIF Quick Installation Manual

1

1x2 S/PDIF TOSLINK
Digital Audio Splitter

Quick Installation Guide

04-0785A

Introduction

The 1x2 S/PDIF TOSLINK Digital Audio Splitter
replicates and distributes one TOSLINK digital
signal to 2 TOSLINK digital outputs.

Key Features and Benefits

• Frequency support up to 96KHz

• Wall mounting metal housing

• S/PDIF support: 2 channel stereo

• Power consumption: 2 Watts (max)

Serial Number Sticker

For future product return or exchange, this serial
number is required. Please keep it for your
reference.

2

Package Contents

• 1x2 S/PDIF TOSLINK Digital Audio Splitter

• Power adapter

• Quick installation guide

Layout

Figure 1: Layout

Power jack

Optical In

Optical Out

3

Hardware Installation

1. Power OFF all devices you plan to connect
to this splitter.

2. Connect your S/PDIF TOSLINK audio
source to the splitter's Optical In using a
TOSLINK Optical cable (cable not included).

3. Connect your S/PDIF TOSLINK audio
receiver, amplifier or speaker to the splitter's
Optical Out(s) using TOSLINK Optical
cable(s) (cable(s) not included).

4. Connect the included power adapter to the
splitter's power jack, then plug the power
adapter into a reliable power outlet.

5. Power on all devices, the splitter is ready for
use.