Tosibox Lock 100 Quick Start Guide

Lock 100

Quick Start Guide v2.8

Copyright © Tosibox Oy, 2015

Serializing the Lock and Key

1

TOSIBOX® Lock

TOSIBOX

2a

Remote user

A) Connect the AC adapter to the Lock and wait for 2

minutes.

B) Serialize the Key to the Lock by inserting the Key

into the USB port of the Lock. When the LED on the
Key stops blinking, the serialization is complete.

C) Go to if deploying into broadband networks or

2a

if deploying into mobile networks.

2b

®

A

AC Adapter

B

Key

Deploying into Broadband Networks

2G/3G/4G, xDSL

Firewall & NAT Friendly

xDSL

2G/3G/4G,

Firewall & NAT Friendly

TOSIBOX

®

Lock

WAN

Internet /xDSL router

A) Connect an internet-connected ethernet cable to

the Lock’s WAN port.

B) Plug the devices into the Lock’s LAN ports (LAN

1-3 or connect wirelessly via WLAN). If the devices
have static IP addresses, please see “Deploying
the Lock” in the user manual.

Deploying into Mobile Networks

2b

A) Disable the SIM card’s PIN code query by inserting the

SIM card into your mobile phone and using the settings
menu. Once disabled, remove the SIM card from the
phone and insert it into the USB Modem.

B) Plug the USB modem* into the USB port of the Lock.

C

E

B

USB modem*

*Supported models as of 08.2014 are: Huawei E160, E169,
E173, E176, E180, E353, E367, E372, E392, E3276, E3131,
E1552 and the new TOSIBOX
HiLink versions are not supported. For more information
and latest supported modem models visit: help.tosibox.com.

Note: Please see “Connecting the Lock to an existing network in client mode” in the TOSIBOX
on deploying Locks as a DHCP client into existing networks. For other deployment configurations not contained within this guide,
please see the TOSIBOX® user manual or email us at [e-mail].

Using the Key

3

®

industrial modem.

C) Connect the computer to the Lock’s service port with

an ethernet cable.

D) Type http://172.17.17.17 into your browser’s address

field to access the Lock’s user interface. Log in using
“admin”. The password can be found on the bottom
of the Lock. Select “Network” > “3G” and enter your
operator’s APN name into the APN field. Click Save.

E) Plug network devices into the Lock’s LAN ports (LAN

1-3) or connect wirelessly via WLAN. See “Deploying
the Lock” in the user manual for static IP configura­tions.

®

user manual (p.13) for information

A) Insert a TOSIBOX® Key into the USB port of your computer to install the Key

software.

The TOSIBOX® Key user interface illustrated above shows all Lock devices serialized to the Key and the
network devices connected to them.
For more options click or icon.

The Lock is connected to the Internet and the Key is connected to the Lock.

The Lock is connected to the Internet, but the Key isn’t connected to the Lock.

The Lock is not connected to the Internet.