Toshiba teli CleverDragon Series, CSCU30CC18-01 Instruction Manual
Rev 3.0
High-Resolution CCD Color Camera
CleverDragon Series
CSCU30CC18(-01)
Instruction Manual
Thank you for purchasing our product.
Before using this CCD color camera, please read through this instruction manual
carefully in order to use this product correctly and safely.
After reading, keep this instruction manual handy so that you can refer to,
whenever you need it.
Contents
Safety Precautions
1. Overview······························································································1
2. Features································································································1
3. Configuration ·······················································································1
4. Optional parts·······················································································2
5. Name of Each Parts···············································································2
6. Installing the camera·············································································3
7. Connection···························································································4
8. DIP switch setting·················································································5
9. Functions······························································································6
10. Before determining it as being a fault·················································21
11. Specifications·····················································································22
12. Guarantee··························································································29
13. Repair································································································29
13. Outline Drawing················································································30
D4161841C
Safety Precautions
Before using this product, read these safety precautions carefully. Important information is shown in this
Instruction Manual to protect users from bodily injuries and property damages, and to enable them to use the
product safely and correctly.
Please be sure to thoroughly understand the meanings of the following signs and symbols before reading the main
text that follow, and observe the instructions given herein.
[Definition of Safety Signs]
Safety Signs Description
Rev 3.0
WARNING
CAUTION
Notes *1: “Serious injury” refers to cases of loss of eyesight, wounds, burns (high or low temperature),
electric shock, broken bones, poisoning, etc., which leave after-effects or which require
hospitalization or a long period of outpatient treatment of cure.
*2: "Light to moderate injuries" refers to injuries, burns, electric shock etc. that do not require
hospitalization or long-term treatment.
*3: "Property damage" refers to cases of extensive damage involving damage to buildings,
equipment, farm animals, pet animals and other belongings.
[Explanation of Safety Symbols]
Safety Symbols Description
PROHIBITED
Indicates a potentially hazardous situation that may result in death or
serious injury (*1) in the event of improper handling.
Indicates a potentially hazardous situation that may result in light to
moderate injuries (*2) or only in property damage (*3)in the event of
improper handling.
This sign indicates PROHIBITION (Do not).
The content of prohibition is shown by a picture or words beside the
symbol.
MANDATORY
This sign indicates MANDATORY ACTION (You are required to do).
The content of action is shown by a picture or words beside the symbol.
D4161841C
[General Handing]
Rev 3.0
WARNING
unplug
Do not get wet
Never pull apart
Avoid
Avoid
Immediately cease use of the equipment in the event of abnormality or malfunction.
If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign
matter, or if the equipment is dropped or malfunctions, fire or electric shock may result.
If such abnormalities occur, disconnect the power plug from the outlet and contact your sales
representative.
Do not use the equipment in locations subject to water splashes.
Otherwise, fire or electric shock may result.
Do not disassemble, repair, or modify the equipment.
Otherwise, fire or electric shock may result.
For internal repair, inspection, or cleaning, contact your sales representative.
Do not place anything on the equipment.
If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric shock may
result.
Do not install the equipment in an unstable or inclined location or locations subject to
vibration or impact.
Otherwise, the equipment may topple over and cause personal injury.
Do not touch
Instruction
Avoid
During an electrical storm, do not touch the power cord or connection cable.
Otherwise, an electric shock may result.
Use the specified voltage.
Use of an unspecified voltage may result in fire or electric shock.
Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled,
placed under heavy objects or heated the power cord , connection cable.
Otherwise, fire or electric shock may result.
D4161841C
[General Handing]
Rev 3.0
CAUTION
Instruction
Observe the following when installing the equipment:
· Do not cover the equipment with a cloth, etc.
· Do not place the equipment in a narrow location where heat is likely to accumulate.
Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.
Do not place the equipment in locations subject to high moisture, oil fumes, steam, or dust.
Otherwise, fire or electric shock may result.
Avoid
Do not install the equipment in locations exposed to direct sunlight or humidity.
Otherwise, the internal temperature of the equipment will rise, which may cause a fire.
Avoid
Use only specified DC power cables and connection cables.
Otherwise, fire or electric shock may result.
Instruction
When performing connection, turn off power.
When connecting the power cable or connection cable, turn off the equipment power.
Instruction
Instruction
Otherwise, fire or electric shock may result.
Contact your sales representative to request periodic inspection and cleaning (every
approx. five years).
Accumulation of dust inside the equipment may result in fire or electric shock.
For inspection and cleaning costs, contact your sales representative.
D4161841C
CASES FOR INDEMNITY (LIMITED WARRANTY)
We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in
the following cases.
In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party, deliberate
or accidental misuse by the user, or use under extreme operating conditions.
In the case of indirect, additional, consequential damages (loss of business interests, suspension of business
activities) are incurred as result of malfunction or non-function of the equipment, we shall be exempted from
responsibility for such damages.
In the case damage or losses are caused by failure to observe the information contained in the instructions in
this instruction manual and specifications.
In the case damage or losses are caused by use contrary to the instructions in this instruction manual and
specifications.
In the case damage or losses are caused by malfunction or other problems resulting from use of equipment or
software that is not specified.
Rev 3.0
In the case damage or losses are caused by repair or modification conducted by the customer or any
unauthorized third party (such as an unauthorized service representative).
Expenses we bear on this product shall be limited to the individual price of the product.
RESTRICTION FOR USE
Should the equipment be used in the following conditions or environments, give consideration to safety
measures and inform us of such usage:
1. Use of the equipment in the conditions or environment contrary to those specified, or use outdoors.
2. Use of the equipment in applications expected to cause potential hazard to people or property, which
require special safety measures to be adopted.
This product can be used under diverse operating conditions. Determination of applicability of equipment or
devices concerned shall be determined after analysis or testing as necessary by the designer of such equipment
or devices, or personnel related to the specifications. Such designer or personnel shall assure the performance
and safety of the equipment or devices.
This product is not designed or manufactured to be used for control of equipment directly concerned with
human life (*1) or equipment relating to maintenance of public services/functions involving factors of
safety (*2). Therefore, the product shall not be used for such applications.
(*1): Equipment directly concerned with human life refers to.
· Medical equipment such as life-support systems, equipment for operating theaters.
· Exhaust control equipment for exhaust gases such as toxic fumes or smoke.
· Equipment mandatory to be installed by various laws and regulations such as the Fire Act or
Building Standard Law
· Equipment related to the above
(*2) :Equipment relating to maintenance of public services/functions involving factors of safety refers to.
· Traffic control systems for air transportation, railways, roads, or marine transportation
· Equipment for nuclear power generation
· Equipment related to the above
D4161841C
Notes on using this product
Handle carefully
Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause
malfunctions. Further, do not damage the connection cable, since this may cause wire breakage.
Environmental operating conditions
Do not use the product in locations where the ambient temperature or humidity exceeds the specifications.
Otherwise, image quality may be degraded or internal components may be adversely affected. In particular, do
not use the product in areas exposed to direct sunlight. Moreover, during shooting under high temperatures,
vertical stripes or white spots (noise) may be produced, depending on the subject or camera conditions (such as
increased gain). However, such phenomena are not malfunctions.
Check a combination with the lens
Depending on the lens and lighting you use, an image is reflected as a ghost in the imaging area. However, this
is not because of a fault of the camera.
In addition, depending on the lens you use, the performance of the camera may not be brought out fully due to
deterioration in resolution and brightness in the peripheral area, aberration and others.
Be sure to check a combination with the camera by using the lens and lightning you actually use.
When installing a lens in the camera, make sure carefully that it is not tilted.
In addition, use a mounting screw free from defects and dirt. Otherwise, the camera may be unable to be
removed.
Do not shoot under intense light.
Avoid intense light such as spot lights on part of the screen because it may cause blooming or smears. If intense
light falls on the screen, vertical stripes may appear on the screen, but this is not a malfunction.
Rev 3.0
Occurrence of moiré
If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a malfunction.
Occurrence of noise on the screen
If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may be
generated on the screen. If this occurs, move the camera or the cable.
Handling of the protective cap
If the camera is not in use, attach the lens cap to the camera to protect the image pickup surface.
If the equipment is not to be used for a long duration
Turn off power to the camera for safety.
Maintenance
Turn off power to the equipment and wipe it with a dry cloth.
If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted
neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may damage
or discolor the paint and indications.
If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative.
D4161841C
Disposal
When disposing of the camera, it may be necessary to disassemble it into separate parts, in accordance with the
laws and regulations of your country and/or municipality concerning environmental contamination.
Following information is only for EU-member states:
The use of the symbol indicates that this product may not be treated as household waste.
By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed information
about the take-back and recycling of this product, please contact your supplier where
you purchased the product.
Rev 3.0
This equipment complies with Part15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This equipment may not cause harmful interference, and (2) This equipment must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be require to correct the interference at his own expense.
D4161841C
Internal buffer materials
・
Bag
LDPE
Rev 3.0
10
中华人民共和国
环保使用期限
环保使用期限标识，是根据电子信息产品污染控制管理办法以及，电子信息产
品污染控制标识要求(SJ/T11364-2006)、电子信息产品环保使用期限通则，制
定的适用于中国境内销售的电子信息产品的标识。
电子信息产品只要按照安全及使用说明内容，正常使用情况下，从生产月期算
起，在此期限内，产品中含有的有毒有害物质不致发生外泄或突变，不致对环
境造成严重污染或对其人身、财产造成严重损害。
产品正常使用后，要废弃在环保使用年限内或者刚到年限的产品时，请根据国
家标准采取适当的方法进行处置。
另外，此期限不同于质量/功能的保证期限。
The Mark and Information are applicable for People's Republic of China only.
＜产品中有毒有害物质或元素的名称及含量＞
有毒有害物质或元素
部件名称
相机本体
○：表示该有毒有害物质在该部件所有均质材料中的含量均在电子信息产品中有毒有害物质的限量
要求标准规定的限量要求(SJ/T11363-2006)以下
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出电子信息产品中有毒有害物质
的限量要求标准规定的限量要求(SJ/T11363-2006)
This information is applicable for People's Republic of China only.
铅（Pb） 汞（Hg） 镉（Cd）
× ○ ○ ○ ○ ○
リサイクルに関する情報（包装物）
有关再利用的信息(包装物)
Information on recycling of wrapping composition
六价铬
（Cr(VI)）
多溴联苯
（PBB）
多溴二苯醚
(PBDE）
箱／箱子／
Box
内部緩衝材料・袋
内部缓冲材料·袋
CB
段ボール
瓦楞纸板
Corrugated cardboard
04
D4161841C
1. Overview
This CCD color camera is a high-resolution color camera that features all pixel readout mode 1/1.8 CCD.
Model Power Supply Interface
CSCU30CC18 Camera Link Connector
CSCU30CC18-01 I/O Connector
(Power over Camera Link)
PoCL
non-PoCL
(Camera Link)
2. Features
(1)
High resolution
Bayer array high pixel density CCD (number of effective pixels 2.01 M, number of total pixels 2.11 M) is used.
(2)
Square grids
The CCD pixels arrayed in square grids facilitates computation for image processing.
(3)
Full-frame shutter
Since all pixels are output even by shutter operation, high resolution can be achieved, without deteriorating the
vertical resolution.
(4)
Camera link interface (power supply type) PoCL
The interface for image output and camera control complies with the camera link standard.
By using a camera link frame grabber board for camera link of possible power supplies, the shot image can be
transferred to PC at high speed, various camera controls can be performed from PC, and the power supply of the
camera can be supplied with one cable. The camera link model that is not the power supply type is
CSCU30BC18-01.
(5)
All-pixel readout mode (normal mode)
All pixel signals (in the effective area) are output in approximately 1/30 second.
(6)
Programmable partial scan mode
Partial scan within the range arbitrary from 50 lines to 1236 lines is possible.
(7)
High-speed draft readout mode
By reading 2 lines from every 8 lines, all signals in the effective area are output in approximately in 1/89 second.
(8)
Random trigger shutter
By external trigger signal input, the shot image can be grabbed at an arbitrary timing.
(9)
Multiple-shutter
By external trigger signal input, the shot image can be grabbed at an arbitrary timing and the accumulated shot
images can be output at an arbitrary timing.
Rev 3.0
3. Configuration
(1) Camera body·················································································1
(2) Accessories
Instruction Manual (Japanese)····················································1
Instruction Manual (English)······················································1
1
D4161841C
4. Optional parts
(1) Power cable Model name: CPRC3700-**
(2) Camera Link cable For the cable for PoCL, please contact the cable manufacturer.
(3) Camera mounting kit Model name: CPT4000CL
(4) Camera adapter Model name: CA130C
*NOTE: Application software is not supplied as a standard item.
Notes on optional parts and compliance with safety standard conditions:
We assure the compliance of this camera with the safety standard when it is used in combination with the
optional parts listed above.
If you use the camera in combination with parts other than specified by our company, you are responsible
for finally confirming the compliance with the safety standard by using the entire machine/equipment.
5. Name of Each Parts
PoCL
CSCU30CC18 (PoCL):
There is "PoCL" display.
CSCU30CC18-01 (Non-PoCL):
There is NOT "PoCL" display.
Rev 3.0
(1)
I/O
(2)(3)
(1)
Video output/controlling connector (Camera Link Base Configuration) CAMERA LINK
Outputs video signals and VALID, based on the camera link standard LVDS.
This connector is connected to the frame grabber board, image processing device and others.
・
Connector model: DR 26-PIN connector 10226-2210PE (manufactured by 3M).
Pin No. I/O Signal Name Pin No. I/O Signal Name
1 I(-) +12V (GND) 14 - GND
2 O Tx OUT0- 15 O Tx OUT0+
3 O Tx OUT1- 16 O Tx OUT1+
4 O Tx OUT2- 17 O Tx OUT2+
5 O Tx CLK OUT- 18 O Tx CLK OUT+
6 O Tx OUT3- 19 O Tx OUT3+
7 I
8 O
9 I
10 I
11 I CC3- 24 I CC3+
12 I CC4+ 25 I CC413 - GND 26 I(-) +12V (GND)
Ser TC（RxD）+
Ser TFG（TxD）-
CC1（TRIG）-
CC2（MULTI）+
20 I
21 O
22 I
23 I
Ser TC（RxD）-
Ser TFG（TxD）+
CC1（TRIG）+
CC2（MULTI）-
Please 1PIN and 26PIN must become power supplies, and match the camera link cable and grabber board for
PoCL and use it. Please note that they become GND in camera link model.
2
D4161841C
Rev 3.0
(2) DIP switches
Used for various setting. For more information how to set the dip switches, see Chapter 8 "Dip Switch Setting"
(on page 5).
(3)
Connector for power supply and sync signal input/output I/O
This is a terminal used for power supply to the camera. This connector is connected to the power supply unit.
In addition, this connector is used for sync signal (WEN signal) output and external trigger signal input.
・
Connector (Camera side) : HR10A-10R-12PB (Manufactured by HIROSE DENKI)
・
Plug (Cable side) : HR10A-10P-12S (Manufactured by HIROSE DENKI) or equivalents
Pin No. I/O Signal Name
1
2 -(I)
3
4
5
6
7
8
9
10 O WEN
11 - TRIG
12
Because the power supply is done from the camera link cable, 2PIN is opened. Please note that they
become +12v in camera link model.
-
-
-
-
-
-
-
-
-
GND
N.C.(+12V)
GND
N.C.
GND
N.C.
N.C.
GND
N.C.
GND
１１１１
９９９９
２２２２
３３３３
４４４４
11
11
1111
10
10
1010
12
12
1212
８８８８
７７７７
６６６６
５５５５
Rearview
6. Installing the camera
(1) When you fix the camera with a tripod stand screw (1/4-20UNC), use an optional mounting tab.
When you fix the camera by using the mounting screw hole on the camera body, use an M3 screw (6 mm or less for the
(2)
portion to be inserted into the inside of the camera body).
3
D4161841C
7. Connection
Connect this camera as shown in the figure below.
(The figure below shows an example of connection. For details, contact our sales representative.)
CCD CAMERA
CCD CAMERA
CCD CAMERACCD CAMERA
CSCU30CC18
CSCU30CC18
CSCU30CC18CSCU30CC18
Camera link cable for PoCL
camera adapter
CA130C
I/O cable
CPRC3700-**
Rev 3.0
Because 12V of camera
side I/O connector of the
PoCL model is OPEN,
AC100V
50/60Hz
PC
CA130C will use only the
synchronous I/O terminal.
grabber board for
camera link (PoCL)
Notes on frame grabber board:
How to connect a frame grabber board with PC and how to set the frame grabber board differ
depending on the frame grabber board you use.
For details, refer to the instruction manual of the relevant frame grabber board.
4
D4161841C
Loading...