Toshiba teli BU030, BU031, BU080, BU130, BU030C Specifications

...

D4212818G

CCD Camera

BU Series

BU030/BU031 BU080/BU130

BU030C/BU030CF

BU130/BU130CF

Specifications

Ver.5.2

D4212818G

Contents

RESTRICTION FOR USE ..................................................................................................................................... 1

CASES FOR INDEMNITY (LIMITED WARRANTY) ......................................................................................... 2

USAGE PRECAUTIONS ....................................................................................................................................... 3

1. Overview ......................................................................................................................................................... 5

2. Features........................................................................................................................................................... 5

3. Configuration ................................................................................................................................................. 7

4. Optional part .................................................................................................................................................. 7

5. Functions ........................................................................................................................................................ 8

6. Specifications .............................................................................................................................................. 15

7. Timing chart ................................................................................................................................................. 27

8. Warranty rules ............................................................................................................................................. 29

9. Repair ............................................................................................................................................................. 30

10. Outline Drawing ........................................................................................................................................... 31

D4212818G

RESTRICTION FOR USE

 Should the equipment be used in the following conditions or environments, give consideration to

safety measures and inform us of such usage: (1) Use of the equipment in the conditions or environment contrary to those specified, or use outdoors. (2) Use of the equipment in applications expected to cause potential hazard to people or property, which require special safety measures to be adopted.

 This product can be used under diverse operating conditions. Determination of applicability of

equipment or devices concerned shall be determined after analysis or testing as necessary by the designer of such equipment or devices, or personnel related to the specifications. Such designer or personnel shall assure the performance and safety of the equipment or devices.

 This product is not designed or manufactured to be used for control of equipment directly concerned

with human life (*1) or equipment relating to maintenance of public services/functions involving factors of safety (*2). Therefore, the product shall not be used for such applications.

(*1): Equipment directly concerned with human life refers to.

- Medical equipment such as life-support systems, equipment for operating theaters.

- Exhaust control equipment for exhaust gases such as toxic fumes or smoke.

- Equipment mandatory to be installed by various laws and regulations such as the Fire Act or Building Standard Law

- Equipment related to the above

(*2) :Equipment relating to maintenance of public services/functions involving factors of safety refers

to.

- Traffic control systems for air transportation, railways, roads, or marine transportation

- Equipment for nuclear power generation

- Equipment related to the above

D4212818G

CASES FOR INDEMNITY (LIMITED WARRANTY)

We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in the following cases.  Natural disasters, such as an earthquake and thunder, fire or any other act of God; acts by third

parties; misuse by the user, whether intentional or accidental; use under extreme operating conditions.

 In the case of indirect, additional, consequential damages (loss of business interests, suspension of

business activities) are incurred as result of malfunction or non-function of the equipment, we shall be exempted from responsibility for such damages.

 In the case damage or losses are caused by failure to observe the information contained in the

instructions in this instruction manual and specifications.

 In the case damage or losses are caused by use contrary to the instructions in this instruction manual

and specifications.

 In the case damage or losses are caused by malfunction or other problems resulting from use of

equipment or software that is not specified.

 In the case damage or losses are caused by repair or modification conducted by the customer or any

unauthorized third party (such as an unauthorized service representative).

 Expenses we bear on this product shall be limited to the individual price of the product.  The item that is not described in specifications of this product is off the subject of the guarantee.  The attachment mistake of a cable.

D4212818G

USAGE PRECAUTIONS

 Handle carefully

Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause malfunctions. Further, do not damage the connection cable, since this may cause wire breakage.

 Environmental operating conditions

Do not use the product in locations where the ambient temperature or humidity exceeds the specifications. Otherwise, image quality may be degraded or internal components may be adversely affected. In particular, do not use the product in areas exposed to direct sunlight. Moreover, during shooting under high temperatures, vertical stripes or white spots (noise) may be produced, depending on the subject or camera conditions (such as increased gain). However, such phenomena are not malfunctions.

 Combination of C-mount lens

Depending on the lens you use, the performance of the camera may not be brought out fully due to the deterioration in resolution and brightness in the peripheral area, occurrence of a ghost, aberration and others. When you check the combination between the lens and camera, be sure to use the lens you actually use. When installing a lens in the camera, make sure carefully that it is not tilted. In addition, use a mounting screw free from defects and dirt. Otherwise, the camera may be unable to be removed. As for the C-mount lens used combining this product, the projection distance from bottom of the screw should use 10mm or less.

10mm or less

C-mount lens

Bottom of the screw

 Mounting to a pedestal

When mounting this product to a pedestal, make sure carefully that the lens doesn't touch with the pedestal.

 Do not shoot under intense light

Avoid intense light such as spot lights on part of the screen because it may cause blooming or smears. If intense light falls on the screen, vertical stripes may appear on the screen, but this is not a malfunction.

D4212818G

 Occurrence of moiré

If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a malfunction.

 Occurrence of noise on the screen

If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may be generated on the screen. If this occurs, move the camera or the cable. Handling of the protective cap If the camera is not in use, attach the lens cap to the camera to protect the image pickup surface. If the equipment is not to be used for a long duration Turn off power to the camera for safety.

 If the equipment is not to be used for along duration

Turn off power to the camera for safety and attach the lens cap to the camera to protect the image pickup surface.

 Maintenance

Turn off power to the equipment and wipe it with a dry cloth. If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may damage or discolor the paint and indications. If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative.

 Disposal

When disposing of the camera, it may be necessary to disassemble it into separate parts, in accordance with the laws and regulations of your country and/or municipality concerning environmental contamination.

Following information is only for EU-member states:

The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the take-back and recycling of this product, please contact your supplier where you purchased the product.

“This symbol is applicable for EU member states only”

D4212818G

1. Overview

This BU series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD. These are BU030 (VGA 1/3 type), BU031 (VGA 1/2 type), BU080 (XGA), BU130 (SXGA). Suffix

[C] or [CF] is attached to the color models. For video output and camera control, the USB 3.0 interface

standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.

2. Features

2.1 High frame rate

Supporting high frame rate, BU030 VGA 125fps, BU031 VGA 125fps, BU080 XGA 40fps, BU130

SXGA 30fps.

2.2 All pixel readout

All pixel signals (in the effective area) are output in one frame processing.

2.3 Full frame shutter

Since all pixels are output even in Random Trigger Shutter operation, high resolution can be

achieved, without deteriorating the vertical resolution.

2.4 Square grids

The CCD pixels arrayed in square grids facilitates computation for image processing.

2.5 USB* 3.0 interface

Video output and camera control are performed via the USB 3.0 standard interface. Data transfer

is up to 5Gbps (Maximum) that enables to output uncompressed video data at high frame rate.

2.6 USB3 Vision* conformity

This product is based on USB3 Vision Ver.1.0.

2.7 GenICam* Ver.2.3 conformity

This product is based on GenICam Generic Interface for Cameras Ver.2.3.

D4212818G

2.8 IIDC2* Digital Camera Control Specification Ver.1.0.0 conformity

This product is based on IIDC2 Digital Camera Control Specification Ver.1.0.0.

2.9 e-CON* Connector adoption

The e-CON connector adoption enables to assemble the cable easily without using special tools.

2.10 Binning mode

B/W models have binning mode. In this mode, pixel data is combined by vertical and horizontal.

Vertical binning mode achieves high frame rate

2.11 Random Trigger Shutter

The Random Trigger Shutter function provides images in any timing by input of an external trigger

signal. Trigger control from PC is available as well.

2.12 Scalable

Selectable video output area. This mode achieves higher frame rate by reducing vertical output

area. And reduces occupied data rate of USB bus by reducing horizontal output area.

2.13 Color processing

Color models have built in color processing. There are RGB, YUV 4:2:2, YUV 4:1:1, Bayer and Mono output modes.

2.14 IR-cut filter

Build-in IR-cut filter models are optional for color models.

Suffix [F] is attached to the model name of built-in IR-cut filter model. (e.g. BU030CF, BU130CF) * Suffix [F] is not shown in the common part of specifications.

2.15 Compact and lightweight

This camera is compact and lightweight; it is easy to integrate into industrial equipment.

2.16 EU RoHS & Chinese ROHS

* USB is a unified standard established by USB-IF(USB Implementers Forum). * USB3 Vision is a unified standard established by AIA (Automated Imaging Association). * GenICam is a registered trademark of EMVA (European Machine Vision Association). * IIDC2 is a unified standard established by JIIA (Japan Industrial Association). * e-CON (Easy & Economy connector) is a sensor connector that is normalized by the manufacturer of the sensor, FA equipment and connector.

D4212818G

3. Configuration

(1) Camera body

* No application software and manuals are attached to this camera.

4. Optional part

- Camera mounting kit Model name: CPTBU

* Contact your dealer / distributor for details of option units.

D4212818G

5. Functions

5.1 Gain

Manual gain control is available from 0 to +18dB.

Notes on gain setting:

Setting the gain value too high increases noises. When you adjust the brightness of the image, I ask you to have final image quality checked with your environment.

5.2 Black Level

Black level is adjustable from -5% to +25% as white saturation level is 100%.

5.3 Gamma

Gamma correction curve is adjustable from 0.45 to 1.

5.4 LUT (Look Up Table)

Arbitrary curve and binarization are possible by using 10 bit input and 10 bit output LUT.

5.5 Exposure Time

Manual exposure time control is available. Exposure time is adjustable by the internal sync signal.

5.6 White balance

Color models have two white balance modes, manual white balance (MWB) and one-push auto white

balance (OPWB). Select the mode to suit the subject and purpose.

5.6.1 MWB

R/B gain can be set independently for each.

5.6.2 OPWB

When OPWB is used, the camera itself adjusts R/B gain to ensure the correct white balance for the effective area.

5.7 Masking

Color models have RGB 3x3 matrixes correction.

D4212818G

5.8 Random Trigger Shutter

An image is captured at the desired timing using trigger signal input. External trigger signal from trigger input connector and software trigger from control command via the USB 3.0 interface are available (Only in Edge mode). Trigger polarity is selectable (High active / Low active).

Note that Random Trigger Shutter will cause a delay between trigger signal and start of exposure. See 7. Timing Chart for detail.

- Edge mode (TriggerSequence0)

The exposure time is determined by Exposure Time setting.

Image

USB bus

Exposure

Trigger

ExposureTime

- Level mode (TriggerSequence1)

The exposure time is determined by the pulse width of the trigger signal.

USB bus

Exposure

Trigger

Pulse Width

Image

- Bulk mode (TriggerSequence6)

Camera exposes and transfers multiple frames by a single trigger.

Image

USB bus

Exposure

Trigger

ExposureTime

Image Image

TriggerAdditionalParameter = 3

+ 23 hidden pages

Toshiba teli BU030, BU031, BU080, BU130, BU030C Specifications

Specifications and Main Features

Frequently Asked Questions

User Manual