Toshiba YL875-42, YL875-46, YL875-55 User Manual

EUROPEAN UNION ECOLABEL

Awarded to goods or services which meet the environmental

requirements of the EU ecolabelling scheme

WL86* Digital

Series

YL86* Digital

Series

YL87* Digital

Series

Contents

English

INSTALLING YOUR TV

Safety Precautions ............................................................................. 5

Installation and important information ..................................... 6

The remote control .........................................................................11

Inserting batteries and effective range ..........................11

CONNECTING YOUR TV

Connecting external equipment ................................................12

Connecting an HDMI® or DVI device to the HDMI input ...13

To connect an HDMI device ...............................................13

To connect a DVI device ......................................................13

HDMI’s ARC (Audio Return Channel) feature ...............13

REGZA-LINK connection ................................................................14

Connecting a computer ................................................................15

To connect a PC to the RGB/PC terminal .......................15

To connect a PC to the HDMI terminal ...........................15

Connecting a home network ......................................................16

To connect the TV to a home network - Wired ...........16

To connect the TV to a home network

with an internet connection - Wireless ......................16

Setting up the USB HDD ...............................................................17

Controls and input connections .................................................18

Switching on ............................................................................18

Using the menu system .......................................................18

Using the TV controls and connections .........................18

MENU structure ................................................................................19

SETTING UP YOUR TV

Startup Application .........................................................................20

Quick Setup ..............................................................................20

Ant/Cable/Satellite (if available) .......................................21

Satellite Settings .....................................................................22

Auto Tuning .............................................................................24

ATV Manual Tuning .........................................................................25

Tuning ........................................................................................25

Skip ..............................................................................................26

Sorting positions ....................................................................26

DTV Manual Tuning ........................................................................27

Manual Tuning ........................................................................27

Manual Tuning for DVB-C ...................................................27

Manual Tuning for DVB-S ....................................................27

DTV Settings ......................................................................................28

Channels (Antenna/Cable) .................................................28

Channels (Satellite) ................................................................29

Standby Channel Update ....................................................29

DVB Character Set ..................................................................29

Dynamic Scan ..........................................................................29

Location setting ......................................................................30

Analogue switch-off ............................................................30

CONTROLS AND FEATURES

General controls ...............................................................................31

Quick Menu ..............................................................................31

Selecting channels ................................................................ 31

The Time Display – analogue only .................................31

Stereo and Bilingual transmissions .................................31

Using 3D functions .........................................................................32

Using the 3D glasses ............................................................. 32

Viewing 3D images ............................................................... 33

Switching display mode or selecting 3D format ........33

Setting the auto start mode .............................................. 35

Setting the 3D PIN code ......................................................35

Setting 3D Start Message .................................................... 35

Setting 3D Lock ......................................................................36

Setting 3D Timer Lock .......................................................... 36

Setting Enable 3D Timer .....................................................36

Displaying 3D Important Info ............................................ 36

Adjusting 2D to 3D Depth ..................................................36

Switching left and right images .......................................36

Sound controls .................................................................................37

Volume controls and sound mute ...................................37

Dual ............................................................................................. 37

Balance ......................................................................................37

Sound Navi ............................................................................... 37

Surround Settings .................................................................. 37

Dolby Volume® .......................................................................37

Dynamic Range Control ......................................................38

Audio Level Offset .................................................................38

Headphone Settings .............................................................38

Audio Description ................................................................. 38

Widescreen viewing ....................................................................... 39

Picture controls ................................................................................ 41

Picture Mode ...........................................................................41

Picture preferences ...............................................................41

Reset ...........................................................................................41

ColourMaster ...........................................................................41

Base Colour Adjustment .....................................................42

Colour Temperature .............................................................42

Auto Brightness Sensor Settings ......................................42

LED Backlight Control ..........................................................42

Black/White Level ..................................................................43

Static Gamma .......................................................................... 43

MPEG NR – Noise Reduction ..............................................43

DNR – Digital Noise Reduction .........................................43

Resolution+ .............................................................................. 43

Active Vision M800 ................................................................43

Motion Detection Range ..................................................... 43

3D Judder Cancellation ....................................................... 44

Resetting the advanced picture settings ......................44

Expert Picture Settings ........................................................44

Control Visualization ............................................................ 46

Automatic Format (Widescreen) ......................................46

4:3 Stretch ................................................................................ 46

2

Blue Screen ...............................................................................46

Picture Position .......................................................................46

Picture still ................................................................................47

HDMI Information Display ..................................................47

Wireless LAN Information .............................................................48

Setting up the Network .................................................................49

Wireless Setup .........................................................................49

Advanced Network Setup ...................................................51

DNS Setup .................................................................................52

Network Connection Test ...................................................53

Using the software keyboard ......................................................53

Network Device Setup ...................................................................54

External Control Setup .........................................................54

Media Renderer Setup .........................................................54

Power Control Mode .............................................................55

Device Name Setup ...............................................................55

Using the USB HDD Function ......................................................55

To record DTV programmes

(One Touch Recording) ....................................................56

To schedule programmed recording .............................56

To check, edit or delete scheduling information .......59

To view a recorded programme .......................................59

Operations from the Library screen ................................60

Other useful functions (Time Shift Recording) ............61

Recording Setup .....................................................................61

To disconnect a USB HDD ...................................................62

To confirm/delete Recording Information ...................63

Scheduling priority ................................................................63

Camera Sensor Settings ................................................................64

Using Toshiba Places ......................................................................65

Using YouTube™ ..............................................................................65

Using the Function Menu ...................................................66

Using Hybrid TV Standard (if available) ...................................68

Using the Media Player ..................................................................68

Basic operation .......................................................................69

Viewing photo files

(on a DLNA CERTIFIED™ Server or USB device) .......70

Viewing movie files

(on a DLNA CERTIFIED™ Server or USB device) .......72

Playing music files

(on a DLNA CERTIFIED™ Server or USB device) .......75

Using the Photo Frame feature ..................................................76

To open Photo Frame ...........................................................76

Setting the features ...............................................................77

Other features ................................................................................... 78

Panel Lock .................................................................................78

The timers ...........................................................................................79

Programme Timers – digital only ...................................79

On Timer ....................................................................................79

Sleep Timer ..............................................................................80

Energy Saving Settings ..................................................................80

Automatic Power Down ......................................................80

No Signal Power Down ........................................................80

Digital on-screen information and Programme Guide ......81

Information .............................................................................. 81

Guide ..........................................................................................82

Genre selection/searching .................................................82

Digital settings – parental control ........................................... 83

Parental PIN Setup ................................................................ 83

Parental Setup ........................................................................ 83

Network Lock ..........................................................................83

Digital settings – Channel Options ..........................................84

Selecting favourite channels .............................................84

Favourite Channel Lists ....................................................... 84

Skip channels ..........................................................................84

Locking channels ................................................................... 84

Digital settings – other settings ................................................ 85

Subtitles ....................................................................................85

Audio languages .................................................................... 85

Common Interface ................................................................85

Software Upgrade and Licences ................................................86

Auto Upgrade ......................................................................... 86

Searching for New Software ..............................................86

Network Upgrade .................................................................. 86

Software Licences .................................................................. 86

System Information and Reset TV ............................................. 87

System Information ..............................................................87

Reset TV ..................................................................................... 87

PC Settings ......................................................................................... 87

Horizontal and Vertical Position .......................................87

Clock Phase .............................................................................. 87

Sampling Clock .......................................................................88

Reset ...........................................................................................88

Input selection and AV connections ........................................ 88

Input selection ........................................................................ 88

External input skip .................................................................89

Labeling video input sources ............................................89

PC Audio ...................................................................................90

Side Shared Audio ................................................................. 90

HDMI 3 Audio ..........................................................................90

HDMI Settings .........................................................................90

Digital Audio Output ............................................................90

Using Personal TV Mode ...............................................................91

Using REGZA-LINK ........................................................................... 93

Enable REGZA-LINK ............................................................... 93

TV Auto Power ........................................................................93

Auto Standby ..........................................................................94

Amplifier Control ................................................................... 94

Initial Speaker Setting ..........................................................94

Position Key Pass Through .................................................94

REGZA-LINK input source selection ................................94

REGZA-LINK Device Control ...............................................95

REGZA-LINK one touch play .............................................. 95

REGZA-LINK system standby .............................................95

REGZA-LINK system audio control .................................. 95

Toshiba PC compatible with REGZA-LINK ....................95

English

3

Using MHL TV function ..................................................................96

Connecting an MHL-compatible Device .......................96

Operating an MHL-compatible Device ..........................96

English

MHL Setup ................................................................................ 96

TEXT SERVICES

Text services ......................................................................................97

Selecting modes .....................................................................97

Text information ..................................................................... 97

Navigating pages using Auto ............................................97

Navigating pages using LIST ..............................................97

Control buttons ......................................................................98

PROBLEM SOLVING

Questions and Answers ...............................................................99

INFORMATION

License Information ..................................................................... 102

Information ..................................................................................... 104

Specifications and accessories ................................................. 109

4

Safety Precautions

INSTALLING YOUR TV

English

This equipment has been designed and
manufactured to meet international safety standards
but, like any electrical equipment, care must be taken
to obtain the best results and for safety to be assured.
Please read the points below for your own safety.
They are of a general nature, intended to help with all
electronic consumer products, and some points may
not apply to the goods you have just purchased.

Air Circulation

Leave more than 10cm clearance around the
television to allow adequate ventilation. This will
prevent overheating and possible damage to the
television. Dusty places should also be avoided.

Heat Damage

Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.

Mains Supply

The mains supply required for this equipment is 220­240v AC 50/60Hz. Never connect to a DC supply or any
other power source. DO ensure that the television is
not standing on the mains lead. Use only the supplied
lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter,
the removal of which will impair its performance.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.

Do

DO read the operating instructions before you

attempt to use the equipment.

DO ensure that all electrical connections (including

the mains plug, extension leads and inter­connections between pieces of equipment) are
properly made and in accordance with the
manufacturers’ instructions. Switch off and withdraw
the mains plug before making or changing
connections.

DO consult your dealer if you are ever in doubt about

the installation, operation or safety of your equipment.

WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with
the installation instructions. See page 6.

DO be careful with glass panels or doors on

equipment.

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND ‘LIVE’ PARTS.

THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE
AND THEREFORE SHOULD BE READILY OPERABLE.

Do not

DO NOT obstruct the ventilation openings of the

equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.

DO NOT allow electrical equipment to be exposed to

dripping or splashing or objects filled with liquids,
such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources,

such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.

WARNING: To prevent the spread of
fire, keep candles or other open
flames away from this product at all
times.

DO NOT use makeshift stands and NEVER fix legs with

wood screws. To ensure complete safety, always fit the
manufacturer’s approved stand, bracket or legs with
the fixings provided according to the instructions.

DO NOT leave equipment switched on when it is

unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.

DO NOT continue to operate the equipment if you

are in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.

WARNING – excessive sound pressure from
earphones or headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen and cabinet back,
or push anything into holes, slots or any other
openings in the case. These actions will damage
screen or internal parts.

NEVER connect the supplied COMPONENT
Adaptor cable, AV-SCART Adaptor cable or AV
Adaptor cable to a wall outlet. These cables are
ONLY for insertion into the socket provided for the
purpose on the rear/side of the TV.

NEVER guess or take chances with electrical
equipment of any kind - it is better to be safe than
sorry.

5

INSTALLING YOUR TV

Stand style is dependent on model

Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)

Installation and important information

English

Where to install

Locate the television away from direct sunlight and
strong lights. Soft, indirect lighting is recommended
for comfortable viewing. Use curtains or blinds to
prevent direct sunlight falling on the screen.

Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
injury and maintain stability of this apparatus,
secure the TV to the level surface using the strap if
fitted, or to a wall using a sturdy tie to the P clips
provided. Otherwise secure the TV on the level
surface using the supplied mounting screw.

The LCD display panels are manufactured using an
extremely high level of precision technology;
however, sometimes some parts of the screen may be
missing picture elements or have luminous spots.
This is not a sign of a malfunction.

Make sure the television is located in a position where
it cannot be p ushed or hit b y objects, as pressure wil l
break or damage the screen. Also, please be certain
that small items cannot be inserted into slots or
openings in the case.

When using a Wall Bracket

For 46WL, 55WL, 46YL and 55YL series, always use the
screws recommended by the wall mount
manufacturer.

Fixing strap

Fixing strap

Sturdy tie (as short as possible)

Stand clip

‘P’ Clip

Screw
(supplied)

When using MHL (Mobile High-definition Link)

• Interoperability with MHL devices of other manufacturers is not guaranteed.

• Toshiba does not provide any guarantee, therefore, against operational failure such as that described below when an MHL
source is connected to the TV.

- No picture or sound

- Some of the functions do not work by remote operation from the TV

• If the MHL does not work properly, also contact the manufacturer of the source device for advice on its use.

• Do not disconnect the the power plug when the TV is active and the MHL device is being connected.

• Do not disconnect the the power plug when the TV is in standby mode and the MHL device is being connected.

6

INSTALLING YOUR TV

Please take note

The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “Setup/System Setup” menu. Depending on country/area, some of this television’s functions may not be
available. Reception of future additional or modified services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, co ntinuous use of the 4:3 picture on a 16:9 screen may result in some re tention of th e image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (e.g.: Super Live) will prevent permanent retention.

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) Fire;

ii) Earthquake;
iii) Accidental damage;
iv) Intentional misuse of the product;
v) Use of the product in improper conditions;
vi) Loss and/or damage caused to the product whilst in the possession of a third party;
vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual;
viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.

English

When Using a USB HDD (not supplied)

• The recording function has been designed for private
use and entertainment in your home environment.
Please note that any commercial use of the recording
function could lead to copyright infringement of
authors’ rights. Toshiba asks you to respect the
intellectual property rights of third parties.

• Before recording to a device connected to the TV, make
a test recording and check the recording performance.

• Programmes that are prohibited from copying due to
copyright protection cannot be recorded.

• Toshiba shall not be liable for compensation or
incidental damages of any kind whatsoever resulting
from content that was not properly recorded on the
recording device or that was modified or lost.

• Toshiba shall not be liable for damages of any kind
whatsoever (breakdown of the recording device,
modification or loss of the recorded content, etc.)
resulting from malfunction, operating failure or
incorrect operation due to combining with another
connected device.

• If you connect and register a USB HDD that has been
used with a PC or another TV, all the data and recorded
programmes stored on the disk will be deleted.

• To use a USB HDD that has been used with this TV on a
PC, the hard disk must first be formatted with the PC. At
this time, all the data stored using the TV will be
deleted.

• Do not turn off the power supply to the USB HDD or
disconnect the connecting cable while the USB HDD is
operating.

Doing so may result in loss of the recorded data or
malfunction of the USB HDD.

• If you connect a USB bus-powered device to the USB 1
port, it may interfere with recording on the USB HDD.

• The recording function is not available in all countries.

• Please note that recording on the USB HDD is no longer
playable after the TV’s main-board is exchanged during
service.

7

INSTALLING YOUR TV

English

When using the 3D glasses

Available 3D glasses: Toshiba FPT-AG02G

YL86 and YL87 series : Supplied
WL86 series : Not supplied

• The 3D function has been designed for private use and
entertainment in your home environment.
Please note that any commercial use of the 3D function
could lead to copyright infringement of authors’ rights.
Toshiba asks you to respect the intellectual property
rights of third parties.

About handling the 3D glasses

• Do not leave the 3D glasses or the accessories within the
reach of small children.

Inhaling or swallowing them may cause suffocation or
lesions in the stomach wall.

If swallowed, consult a doctor immediately.

• Do not repair, modify, or disassemble the 3D glasses by
yourself.

Doing so may cause a fire or cause you to become
indisposed while viewing 3D images.

Contact the Toshiba Call Center for repair of your 3D
glasses.

• Do not expose the glasses to excessive heat such as
sunshine, fire, or the like.

About the 3D glasses

• Do not use the 3D glasses if they are not working
properly or broken.

Continuing to use them in such a state may cause injury, eye
strain, or indisposition.

Do not use the 3D glasses if they are broken or have any
cracks.

• Do not stand or walk while wearing 3D glasses.

You may lose your balance which could result in falls or
other accidents.

• Do not wear the 3D glasses for any purpose other than
viewing 3D programming.

3D glasses do not function as sunglasses.

• Do not drop, exert pressure on, or step on the 3D
glasses.

Doing so may damage the glass section, which may result in
injury.

Exposing the 3D glasses to liquid or excessive heat may
damage the liquid crystal shutter function.

• If your nose or temple turns red, or you feel pain or
discomfort, stop using the 3D glasses.

Such symptoms as above may occur if you keep wearing
them for a long time, which may also cause indisposition.

• Be careful not to pinch your fingers in the hinge of the
3D glasses.

Cautions on watching 3D images

• Some viewers may experience a seizure or blackout
when exposed to certain flashing images or lights
contained in certain 3D television pictures or video
games.

Anyone who has had a seizure, loss of awareness, or other
symptoms linked to an epileptic condition, or has a family
history of epilepsy, should contact a health care provider
before using the 3D function.

• Avoid use of the 3D function when under the influence
of alcohol.

• If you are ill or feel ill, you should refrain from viewing
3D images, and consult your health care provider as
may be appropriate.

• If you experience any of the following symptoms when
viewing 3D video images, stop viewing and contact
your health care provider:

Convulsions, eye or muscle twitching, loss of awareness,
altered vision, involuntary movements, disorientation, eye
strain, nausea/vomiting, dizziness, headaches.

• If you feel eye fatigue or other discomfort from viewing
3D video images, remove the 3D glasses and
discontinue use until the condition is eliminated.

• Viewing in 3D may cause dizziness and/or
disorientation for some viewers.

Therefore, to avoid injury do not place your TV near open
stairwells, balconies, or wires.

Also do not sit near objects that could be broken if
accidentally hit.

• When viewing 3D images, always wear 3D glasses.

Watching 3D images without 3D glasses may cause eye
strain.

Use specified 3D glasses.

• When watching 3D images, do not wear 3D glasses at an
angle and do not lie down.

If you watch while lying down or with the glasses tilted, the
3D effect is lost and it may cause eye strain.

• It is recommended that the viewer’s eyes and 3D glasses
are level with the screen.

• If you have prescription eye glasses or contact lenses,
wear the 3D glasses over them.

Watching 3D images without appropriate eyewear may
cause eye strain.

• If 3D images often appear in double or if you cannot see
the images in 3D, stop viewing.

Continuous viewing may cause eye strain.

• Due to the possible impact on vision development,
viewers of 3D video images should be age 6 or above.

Children and teenagers may be more susceptible to health
issues associated with viewing in 3D and should be closely
supervised to avoid prolonged viewing without rest.

8

• Watching TV while sitting too close to the screen for an

Screen height

If the 3D PIN number has been forgotten:

Use the Master PIN code of 1276, and then change to a
number of your choice. Select 3D PIN Setup from the

Preferences / 3D Setup menu to enter PIN.

extended period of time may cause eye strain.

The ideal viewing distance should be at least three times
the screen height.

• Watch the TV within effective viewing angle.

Otherwise, you may not see the correct 3D image. Effective
viewing angle:

- Within 30° horizontal, 20° vertical

Notes on handling the 3D glasses’ liquid crystal
shutter lenses

• Do not put excessive force on the lenses.

• Do not scratch the surface of the lenses with sharp
objects.

• Do not drop or bend the 3D glasses.

Notes on IR communication

• Do not block the IR sensor for 3D glasses on the TV by
placing objects in front of it.

• Do not cover the IR sensor on the 3D glasses with
stickers or labels.

• Keep the IR sensor on the 3D glasses clean.

• The use of 3D glasses could interfere with other IR
communication devices. Other IR communication
devices may cause the 3D glasses n ot to work correctly.
Use the TV and 3D glasses in a place where they will not
interfere with other devices or products.

INSTALLING YOUR TV

Notes on watching the TV

• 3D effect and image quality may vary depending upon
content quality and display device capability/
functionality/settings.

• If you use any device, such as a mobile phone or mobile
wireless device, near the 3D glasses, the 3D glasses may
not work correctly.

• Use the product in the following temperature range;
otherwise, the quality of the 3D image or the reliability
of the product cannot be guaranteed.

- 3D glasses: 0°C - 40°C (32°F - 104°F)

- TV: 0°C - 35°C (32°F - 95°F)

• If you use a fluorescent light, it may flicker depending
on the frequency of the light. In this case, reduce the
brightness of the fluorescent light, or us e another light.
(It is not recommended to watch the TV in a dark room,
especially for children.)

• Wear the 3D glasses properly, otherwise you may not
see the correct 3D image.

• When not viewing 3D images on this unit, take off the
3D glasses; otherwise, it may be difficult to see the
display on other products such as PC, digital clock or
calculator, etc.

About the connecting cable

• Use a high-speed and high-quality HDMI cable when
you connect a device such as 3D compatible BD player
or PC to the TV. When you use a standard HDMI cable,
3D images may not be shown.

About the lithium-ion polymer rechargeable
battery

• Do not nail, hammer, or step on the battery.

Doing so may cause a short circuit, leading to overheating,
cracking, or fire.

• Do not overheat, disassemble, or short-circuit the
battery, or throw it into fire.

Doing so may cause cracking or fire.

• Do not connect the battery cord with metal items such
as wires. Also, do not carry or store the battery with
metal items such as necklaces or hairpins.

Doing so may cause a short circuit, leading to overheating,
cracking, or fire.

English

9

INSTALLING YOUR TV

29° 29°

Personal
Identication
(50 ~ 400cm)

Face Detection
(50 ~ 500cm)

27°

7°

Face Detection (50 ~ 500cm)

Personal
Identication
(50 ~ 400cm)

English

The camera sensor installed in this TV can detect a person’s
face or movement and identify individuals by their registered
faces. Please note that certain factors can affect the
performance of the sensor function as set out below.

About the Camera Sensor

General Sensor Function

• For the sensor to operate (for each function) you will need
to be within the sensor detection range as set out below.

• The approximate effective detection range of the camera
sensor is as shown below. (Note: The distance and angle of
the detection range are based on a standard viewing
environment and conditions).

– Horizontal angle: approx. 58° (approx. 29° × 2)

– Vertical angle: approx. 34° (upward approx. 27°,

downward approx. 7°)

–Distance: approx. 50 cm to 500 cm (Personal Identification

Function: approx. 50 cm to 400 cm)

• Do not place anything in front of the TV that may
obstruct detection or reduce the sensor detection
range.

Motion Detection Function

• Motion detection may be affected by the surrounding
environment, such as the brightness of the room. In
addition, very slight, small or momentary movement may
be undetected.

• Sensor performance can be enhanced by making sure the
room is brightly lit and using prolonged and obvious
movements.

• Billowing curtains, a pet or variations in illumination in the
detection range may be detected as motion, even if there is
no person there.

• You can use the camera sensor confirmation menu to check
that no movement made by other persons is being
detected.

Face Detection Function

• The sensor can detect up to eight persons.

• Face Detection may be affected if:
– Your face is obstructed or partially hidden, for example,

by your hair, a mask or a hat,
– Your head is tilted or turned to one side, or
– You are wearing dark glasses or the light is reflected in

your glasses.

• You can use the camera sensor confirmation menu to check
whether your face is detected.

• The camera sensor may detect background images such as
a picture portrait or the pattern on the wall as eyes or nose
even if there is no person there. You can use the
confirmation screen to check whether any such object in
the detection range is being incorrectly detected as a face.

• Face Detection can be less effective on darker complexions
and in darker environments.

• Face Detection can be enhanced by making sure your face
is clearly visible and evenly lit. If the room is dark, Face
Detection can be enhanced by making sure the room is
brightly lit. If the lighting environment creates a sh adow on
your face, Face Detection can be enhanced by adjusting the
lighting to prevent shadows.

Personal Identification Function

• The Personal Identification Function is part of the Face
Detection Function. The factors affecting the Face
Detection Function set out above also apply to the Personal
Identification Function.

• Personal Identification may in addition be affected by:
– A different shadow pattern from that when your face was

registered. Personal Identification accuracy can be
enhanced by registering additional facial images under
different conditions.

– A different lighting environment from when your face was

registered, such as during the day and at night. Personal
Identification accuracy can be enhanced by registering
your face under various lighting environments.

– Whether or not you are wearing glasses. If you wear

glasses, we recommend that you register your face both
with and without glasses.

– A different facial expression. Personal Identification accuracy

can be enhanced by registering different facial expressions.

• Personal Identification may be affected when faces have
similar characteristics (e.g. brothers, sisters, twins).

• Personal Identification is less effective on the faces of young
children.

Face Registration Function

• Up to four people can be registered under the Personal
Identification Function. The same person cannot be
registered twice.

• A maximum of 10 different facial images per person can be
registered. Personal identification accuracy can be enhanced
by registering different facial images as set out above.

• It is advisable to register your face in your usual viewing
position and with your natural facial expression. Registering
your face too near to or too far from the screen may hinder
identification performance.

10

The remote control

16

20

31

30

24

19

17

15

13

11

7

5

4

2

1

18

25

28

27

29

26

14

12

9

10

8

6

3

21

22

23

Simple at-a-glance reference of your remote control.

1 For On/Standby mode
2 To select external input sources
3 To select TV Mode
4 To access Quick Menu
5 To access the “TOSHIBA PLACES” Top Page

When network is not connected, an error message will be
displayed.

6 To access the analogue or digital Channel List
7 To alter the TV volume
8 Switch the Audio Description On/Off
9 To mute the TV sound
10 To change programme positions

To change TEXT pages

11 On-screen Menus
12 To display the digital on-screen Programme Guide
13 When using menus, the arrows move the cursor on the

screen up, down, left or right

14 Press OK to confirm your selection
15 To return to previous Menu
16 To exit menus

INSTALLING YOUR TV

17 Colour buttons: Text and interactive service control

buttons

18 Number buttons
19 To display on-screen information

To access the index page in Text mode

20 To return to previous programme position

21 When in TV mode:

D Analogue time

display

When in Text mode:

A To reveal concealed

text

B To hold a page
C To enlarge text

display size

D To select a page

while viewing a

When using Programme
Guide:

Z –24 hours
z +24 hours
CC –1 page
cc +1 page

normal picture

During Playback:

c

To PLAY

v To STOP
W/w To PAUSE/STEP

To start Time Shift
Recording

Z To SKIP-BACK
CC To REWIND
cc To FAST FORWARD
z To SKIP-FORWARD

22 To record TV programmes
23 To call up text services
24 To switch between 2D and 3D mode
25 Picture still
26 To access Media Player Menu
27 Selectable Picture preferences
28 Widescreen viewing

s Stereo/bilingual transmissions

29
30 To access More Information Menu
31 Digital Subtitles or Analogue TEXT Subtitle pages if

available

Inserting batteries and effective range

Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote are AAA,
IEC R03 1.5V.

Do not combine a used, old
battery with a new one or mix

batteries immediately to prevent acid from leaking into the
battery compartment. Dispose of them in accordance with
instructions on page 103 of this manual.

Warning: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.

The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need replacing.

battery types. Remove dead

11

English

CONNECTING YOUR TV

Cableclamps(forStandtype)

Cableclamps
(forWallMounttype)

RGB/PC INPUT

EXT 1

*

HEADPHONE jack

LAN port

HDMI 1/2/3/4 INPUTS

COMPONENT
VIDEO INPUT

(EXT 2)

* When using the COMPONENT VIDEO INPUT (EXT 2), also connect

the AV Adaptor cable ② (RED and WHITE plugs) as Audio cables
to the VIDEO/AUDIO INPUT (EXT 3). EXT 3 Audio is shared.

VIDEO/AUDIO INPUT (EXT 3)

DIGITAL AUDIO
OUTPUT (OPTICAL)

Satellite dish

Media Recorder

Aerial Cable

“F-type”

Connecting external equipment

English

Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.

Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/o r
through the media recorder to the television.

Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the LNB from the satellite dish to the SATELLITE
ANTENNA socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.

SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television.

Before running Auto Tuning, put your decoder and media
recorder to Standby.

The Digital Audio Output socket enables the connection of a
suitable surround sound system.

NOTE: This output is always active.

HDMI® (High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output. For acceptable video or PC signal formats
through the HDMI terminals, see page 105.

NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.

LAN port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.

A wide variety of external equipment can be connected to
the back of the television; therefore, the relevant owner’s
manuals for all additional equipment must be referred to
for exact instructions.

If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.

When the external input mode is s elected while viewing DTV
mode, the SCART socket does not output video/audio signals.

12

o to select between DTV, EXT 1, EXT 2,

CONNECTING YOUR TV

the back of your television

HDMI device

HDMI cable

English

Connecting an HDMI® or DVI device to the HDMI input

The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital
video from a DVI (Digital Visual Interface) source
device.

This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant consumer electronic
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 105.

NOTE:

• Some early HDMI equipment may not work properly with
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
INSTAPORT™ and Enable Content Type options to “Off”.
Your early HDMI source should operate properly with your
television. See page 90.

• Supported Audio format: Linear PCM, Dolby Digital (AC-3),
sampling rate 32/44.1/48kHz.

To connect an HDMI device

Connect an HDMI cable (type A connector) to the HDMI
terminal.

For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo ( ).

• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.

• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).

• See “HDMI 3 Audio” section on page 90.

To connect a DVI device

Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI 3 terminal and audio cables to the PC/
HDMI 3 (AUDIO) socket (see illustration).

• The recommended HDMI-to-DVI adaptor cable length is

6.6 ft (2m).

• An HDMI-to-DVI adaptor cable transfers video only.
Separate analogue audio cables are required.

• See “HDMI 3 Audio” section on page 90.

the back of your television

HDMI-to- DVI adaptor Cable

Audio cable for HDMI to television
connection (not supplied)

DVI device

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:

• When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.

To view the HDMI device video, press the
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

o button to select

HDMI’s ARC (Audio Return Channel)

feature

This feature enables the audio signal of the TV to be sent to
the AV amplifier via the HDMI cable. It will not be necessary to
connect a cable from the audio output of the TV to the audio
input of the AV amplifier to reproduce the audio received
from the tuner of the TV through the AV amplifier.

the back of your television

AV amplier that supports ARC

HDMI cable

13

CONNECTING YOUR TV

the back of your television

AV amplier Playback device

Playback device

REGZA-LINK connection

English

You can control the basic functions of connected audio/video devices using the television’s remote
control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of
setup and operations, see pages 93–95.

For the setup shown above, you will need three HDMI cables.

NOTE:

• If several devices are connected, the REGZA-LINK feature
may not operate properly.

• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( ).

• This function is available when one PC and one AV amplifier
are connected separately. However, it may not operate
properly if the PC is connected via the AV amplifier.

Before controlling the device(s):

• After completing the above connections, set the REGZA­LINK Setup menu as you desire (see page 93).

• The connected devices must also be set. For details, see the
operation manual for each device.

• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.

• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.

14

Connecting a computer

Computer

Audio cable for PC to television
connection (not supplied)

the back of your television

Conversion adaptor
if required
(not supplied)

Mini D-sub
15 pin connector

RGB PC cable

(not supplied)

With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the
television and hear the sound from the television’s
speakers.

CONNECTING YOUR TV

• When PC input mode is selected, some of the television’s
features will be unavailable e.g. Colour System in the
Setup/System Setup menu.

• Some PC models may output unique signals that the
television may be unable to detect (see page 104).

• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.

English

To connect a PC to the RGB/PC terminal

When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI 3 (AUDIO) socket. Select PC
from the PC/HDMI 3 Audio options in the AV Connection
menu located in the Preferences menu.

To use a PC, set the monitor output resolution on the PC
before connecting it to the television. For acceptable PC
signal formats, see page 104.

To display the optimum picture, use the PC setting feature
(see page 87).

NOTE:

• The PC audio input terminal on the television is shared with
the HDMI 3 analogue audio input terminal (see page 90).

• Some PC models cannot be connected to this television.

• An adaptor is not needed for computers with a compatible
mini D-sub15-pin terminal.

• Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.

• A ban d m ay a ppe ar at t he e dg es o f t he s cre en o r p art s of th e
picture may be obscured. This is due to scaling of the
picture by the set, it is not a malfunction.

To connect a PC to the HDMI terminal

When connecting a PC to the HDMI terminal on th e television,
use an HDMI-to-DVI adaptor cable and an analogue audio
cable.

If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not
necessary.

the back of your television

Computer

HDMI-to- DVI
adaptor Cable

Audio cable for PC to
television connection (not
supplied)

For acceptable PC and video signal formats, see page 105.

NOTE:

• The edges of the images may be hidden.

• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.

15

CONNECTING YOUR TV

Modem (if available)

Server PC

Router with Hub

the back of your television

Cable or Phone jack

[1] [2]

[2]

[3][2]

Access point (AP)

Wireless LAN router

Modem

TV (Built-In WLAN system)

Computer

Connecting a home network

English

The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DL NA CER TIF IED ™ s erv er a nd pla y/d isp la y th em o n
your TV.

NOTE:

• If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments.

• If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 52.

• If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.

• If you connect the TV and PC directly, use a crossover LAN
cable.

To connect the TV to a home network -

Wired

To connect the TV to a home network

with an internet connection - Wireless

Please refer to “Wireless Setup” section on page 49.

[1] Coaxial or telephone cable (depending on your modem typ e)

[2] Standard LAN cable

[3] Do NOT connect a phone jack directly to the TV’s LAN port.

16

Setting up the USB HDD

An unregistered USB HDD has been detected.
Register the USB HDD?

Yes

Device Name

Registered

Connected
USB HDD 1

USB HDD 2

USB HDD 3

Device List

To connect an USB HDD (not supplied)

USB2

USB cable
(not supplied)

NOTE: For available USB HDD information, see "Product Information" on the website.

To register an USB HDD

When you connect a new USB HDD to the USB 2 port on the
TV, the following screen will appear.

a Press C or c to select Yes and press OK.

The formatting confirmation window will appear.

b Press C or c to select Yes and press OK.

Registration will start.

c If you want to name the USB HDD, press C or c to

select Yes and press OK.

See page 53 to input characters.

The maximum number of characters is 10.

If you prefer the default name ”USB HDD X,” select No
and press OK.

d The Device List will appear.

While in the list mode, the following key operations
are available:

OK button................. To register/remove

RED button ..............To disconnect

GREEN button ........ To change Device Name

YELLOW button .....To test

BLUE button............ To format

NOTE:

• To disconnect a USB HDD from the TV, follow the
procedures for “To disconnect a USB HDD” section
(page 62).

• When using a USB HDD, if necessary, perform the settings
and operations shown in “Using the USB HDD Function”
section (see page 55).

• Connect the USB HDD to the USB 2 port.
Recording and playback cannot be performed if connected
to the USB 1 port.

• Up to 8 USB HDDs can be registered to this TV.

• Recorded programmes saved on the USB HDD can only be
viewed on this TV. They cannot be viewed when connected
to another TV (including the same model of TV), a PC, or
other device.

• If an HDD is re-registered, it will not be formatted.

• When the USB HDD is formatted, all the data stored on the
HDD will be deleted.

CONNECTING YOUR TV

English

USB HDD

You can now use registered USB HDDs.

17

CONNECTING YOUR TV

Ambient Light Sensor

Camera Sensor

Control panel (touch sensor)

3D IR

• RED (in 3D mode)

ORANGE LED – Programme timer
set (digital only)
RED LED – Programme timer
Active (digital only)

RED LED – Standby
BLUE LED – Power on

COMMON INTERFACE
The Common Interface is for a
Conditional Access Module (CAM).
Contact a service provider.
The software updating of CI Plus
CAM may be automatically
executed. At this time, your
Recording/Reminder program­ming will be canceled.

USB 1 port
Media Player

USB 2 port
Media Player/
USB HDD connection port

Controls and input connections

English

A wide variety of external equipment can be connected to the input sockets on the side of the television.

While all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.

Switching on

If the RED LED is not lit, check that the mains plug is
connected to the power supply and press
control; it may take a few moments. The BLUE LED will be lit.

To put the television into Standby, press
control. To view the television, press
take a few seconds to appear.

For energy saving:

We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television is
not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.

NOTE: Putting the television into standby mode will reduce
energy consumption, but will still draw some power.

Press MENU on the remote control to display the menu.

The five initial topics icons will appear. As each symbol is
selected by pressing
Press
sub menu to see any options.

Using the menu system

C or c on the remote control.

Bb C c to enter a sub menu and then enter a further

1 again. The picture may

1 on the remote

1 on the remote

18

NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are
not available in a mode, they will appear grayed out.

To use the option, press
move up and down and press
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.

B and b on the remote control to

C or c to select your desired

Using the TV controls and connections

To alter the volume gently touch –
To alter the programme position touch
Touch MENU and
picture options.
Touch MENU to finish.
To select an external input, touch

input source is selected.
The Media Player feature provides access to photo, movie and

music files stored on a USB storage device that is connected
via the USB 1 or USB 2 port or on a network device.
The USB 2 port has to be used with a USB HDD (not supplied)
in order to record/playback TV programmes.

NOTE: The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other connected
equipment.

Please always refer to the owner’s manual of the equipment to be
connected for full details.

NOTE: Interactive video games that involve shooting a “gun”
at an on-screen target may not work with this TV.

b p B, – 2 + to control the sound and

2 +.

b p B.

o until the appropriate

CONNECTING YOUR TV

TV Programmes

Media Player

Connected TV

Setup

Function

Programme

Timers

Genre Search

Library

Guide

MENU structure

To ope n th e mai n me nu ( ill ust rati on b elo w) , pre ss MENU on the remote control or on the TV control panel.

1st Layer 2nd Layer 3rd Layer

Press MENU. Press

TV Programmes

C c / B. Press C c.Press OK. Press BbC c.

English

Media Player

Connected TV

Function

Setup

Guide
Genre Search
Programme Timers
Library

Photo
Movie
Music
Media Player Setup

Toshiba Places
YouTube

Photo Frame
On Timer
Sleep Timer

Picture
Sound
Preferences
System Setup

Jump to Programme Guide (EPG)
Jump to Genre Search
Jump to Programme Timers
Jump to Library

Device Select or Photo Viewer
Device Select or Movie Viewer
Device Select or Music Viewer
Media Player Setup Menu

Jump to Toshiba Places
Jump to YouTube

Jump to Photo Frame
On Timer Menu
Sleep Timer Menu

Picture Menu
Sound Menu
Preferences Menu
System Setup Menu

19

SETTING UP YOUR TV

Quick Setup

Country

Germany

Primary Subtitle Language

German

English

English

English

Secondary Subtitle Language

Primary Audio Language

Secondary Audio Language

AutoView

No

AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?

Ant/Cable/Satellite

Satellite

Cable

Next

Antenna

Auto Tuning

Progress Found

ATV Tune Waiting...

Channel: C7

DTV Tune 3% 2

Startup Application

English

Before switching on the television, set your
decoder and media recorder, if applicable, to
Standby. To set up the television, use the buttons
on the remote control as detailed on page 11.

Quick Setup

a Press the 1 button. The Menu Language screen will

appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.

b Press B b C c to select the menu language and

press OK.

c Highlight Country and press C or c to select. The

television is now set to tune the stations for your
country.

NOTE:

• The following display menus will differ slightly
according to the country you selected.

• If there is not a country that you want to select in the
list, select Others.

d Press OK, and the Location screen will appear.

Location

To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.

Home

e Press C or c to select Home or Store. For normal

home use, select Home.

f Press OK, and the TV Mounting screen will appear,

press

C or c to select Stand or Wall.

TV Mounting
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the
Sound menu.

Stand

g Press OK, and the AutoView screen will appear. Press

C or c to select Yes or No.

h Press OK. If the Ant/Cable/Satellite screen appears,

press

B or b to select Antenna, Cable or Satellite

and press OK to check ( ).

If DVB-C is not supported in your area, Cable will not
be displayed.

• When you select Antenna or Cable, follow steps 9
to 12.

• When you select Satellite, skip to step 13.

• When you select Antenna (or Cable) and Satellite,
the Satellite Settings startup screen will appear
automatically after completing the Antenna (or
Cable) scan and pressing OK.

i Select Next and press OK. The Auto Tuning start up

screen will appear with the option to select between
DTV and ATV, DTV or ATV if available. Use
select the appropriate mode.

j Press B or b to highlight Start Scan and press OK.

The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.

You must allow the television to complete the
search.

When the search is complete, the television will
automatically select position one.

The Auto Tuning screen will display the total number
of services found.

NOTE: If there are multiple channels with the same
channel number, a confirmation window will appear.

C or c to select the one you prefer.

Press

20

C or c to

k Press C or c to view the DTV (digital channel) or ATV

SatelliteNo. Dish LNB

ASTRA 19.2˚E

Satellite Settings

1

4

3

2

11

Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600

Switch Type

None

LNB Power

On

Done

Positioning

Signal Level 30%

Go to Stored Position

Store Position

Transponder

1/83 (10743 MHz H)

Positioning

WE

Go to 0

Satellite : ASTRA 19.2°E

Step Size

1

PLEASE NOTE

Auto Tuning - Satellite

Start Scan

Satellite

Free to Air

ASTRA(19.2°E)

Scan Option

(analogue channel) lists.

l Press B or b to move through the list to select a

channel and press OK to view.

In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.

REMEMBER: Press TV at any time to select between
ATV and DTV (DTV Ant TV/Radio/Text, DTV Cable TV/

Radio/Text, DTV Sat TV/Radio/Text if available)
modes.

NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.

m Select Next and press OK. The Satellite Settings

screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. See “Satellite
Settings” on page 22.

SETTING UP YOUR TV

B or b to highlight Store Position and press

Press
OK to store the dish position. Repeat steps 13 and 14
for the next satellite as necessary.

If your satellite dish is not movable, the Positioning
screen will not appear.

Adjust the dish position manually for the maximum
Signal Level strength.

Highlight Done and press OK.

o If the reception testing completes successfully, the

Auto Tuning startup screen will display.

You can select Scan Option from Free to Air and All.

p Press B or b to highlight Start Scan and press OK.

The television will start to search for available DVB-S
channels. The progress bar will indicate the scan
status.

When the search is complete, the Auto Tuning results
screen will display the total number of services found.

q Press B or b to move through the list to select a

channel and press OK to view.

English

Highlight Done and press OK.

n If your satellite dish is movable, the following

Positioning screen will appear.

B or b to highlight Positioning and press C or

Press

c to find the dish position with the strongest signal

level.

The Quick Setup menu can also be accessed at any
time from the Setup/System Setup menu.

Ant/Cable/Satellite (if available)

From this menu, you can set the RF input configuration.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight System Setup icon.

c Press OK to display System Setup menu.

d Press B or b to select Ant/Cable/Satellite and press

C or c to select Antenna, Cable or Satellite.

NOTE: When you attempt to change the Ant/Cable/
Satellite setting, a warning message will appear

followed by PIN entry (if PIN has been set) and a
prompt for Auto Tuning.

21

SETTING UP YOUR TV

Auto Tuning

DTV and ATVTuning Mode

DTV

Quick ScanScan Type

AutoStart Frequency

AutoEnd Frequency

AutoModulation

AutoSymbol Rate

AutoNetwork ID

Start Scan

e When Ant/Cable/Satellite is set to Cable, the

English

following setting options will be provided in the Auto
Tuning screen.

Press

B or b to select an item and press C or c to

select your desired option.

With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.

DTV Scan Type:

This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.

DTV Start Frequency:

This sets the frequency from which the scan will begin.

DTV End Frequency:

This sets the frequency at which the scan will end.

DTV Modulation:

You can choose from five QAM modulation settings.

DTV Symbol Rate:

This is the baud rate (KS/s) of the scan.

DTV Network ID:

This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.

Satellite Settings

From the System Setup menu, you can add the satellites that you

wish to tune and configure detailed settings for each one

individually.

To add a satellite:

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight System Setup icon.

c Press OK to display System Setup menu.

d Press B or b to select Satellite Settings and press

OK.

Satellite Settings

Switch Type

LNB Power

Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600

SatelliteNo. Dish LNB

ASTRA 19.2˚E

1

2

3

4

Done

None

On

11

e Press b to highlight a new line to add an another

satellite and press OK.

f Press b until the required satellite is displayed and

press OK.

To delete a satellite:

a In the Satellite Settings menu, press B or b to select

the satellite you want to delete.

b Press the RED button. A confirmation window will

appear.

c Press C or c to select Yes and press OK.

NOTE: It is not possible to delete position No.1.

22

To edit the satellite settings:

ASTRA 19.2˚E

111

Transponder Settings

1 10743 H

Frequency Polarisation Symbol Rate S/S2

7 10861

8 10876

2 10773

3 10788

4 10817

5 10832

6 10847

H

V

H

V

V

H

V

22000

22000

22000

22000

22000

22000

22000

22000

S

S

S

S

S

S

S

S

Transponder Settings

76 12640 V

Frequency Polarisation Symbol Rate S/S2

82 12728

83

77 12662

78 12669

79 12692

80 12699

81 12721

V

H

V

H

V

H

22000

22000

22000

22000

22000

22000

22000

S

S

S

S

S

S

S

83 0 H0S

83 12731 H 22000 S2

a In the Satellite Settings menu, press B to highlight

Switch Type.

SETTING UP YOUR TV

English

To delete a transponder:

a In the Transponder Settings menu, press B or b to

highlight the line you want to delete.

b Press C or c to select None, ToneBurst, DiSEqC

2way or DiSEqC 4way as your satellite switch type.

c Press b to highlight LNB Power and press C or c to

select On or Off.

To add a transponder:

a In the Satellite Settings menu, press B or b to

highlight the line you want to edit and press OK.

b Press the GREEN button. The Transponder Settings

screen will appear.

c Press B to highlight a new line.

b Press the RED button.

To edit the Transponder Settings:

a In the Transponder Settings menu, press B or b to

highlight the line you want to edit and press OK.

b Press C or c to select Frequency, Polarisation,

Symbol Rate or S/S2, and set the item using the

number buttons if necessary.

c Press OK to save your settings.

d Repeat steps 1 through 3 for other lines.

e Press the BLUE button to finish editing and return to

Satellite Settings.

Press the GREEN but ton to c ancel any edi ts tha t were
made.

Press the YELLOW button to reset all transponder
settings to their initial default settings.

To select the Dish Type:

a In the Satellite Settings menu, press B or b to select

the required satellite line and press OK.

b Press C or c to highlight Dish and press the GREEN

button.

Dish Settings

Dish : 1

Dish Type

Fixed

d Press OK.

e Edit each parameter as required and press OK.

c Press C or c to select Dish Type. You can select

Movable or Fixed as the Dish Type.

23

SETTING UP YOUR TV

LNB Settings

Lower LOF

9750

LNB : 1

Upper LOF

10600

System Setup

Menu Language

English

Country

Ant/Cable/Satellite

Auto Tuning

ATV Manual Tuning

DTV Settings

DTV Manual Tuning

Satellite Settings

Germany

Auto Tuning

Previous settings will be lost! Press EXIT for no
change.

AllSatellite

Free to AirSearch Option

Start Scan

To select the LNB Settings:

English

a In the Satellite Settings menu, press B or b to select

the required satellite line and press OK.

b Press C or c to highlight LNB and press the GREEN

button.

c Press B or b to select Lower LOF or Upper LOF and

input the appropriate frequencies.

Auto Tuning

NOTE: As new services are broadcast, it will be necessary to
re-tune the television in order to view them.

Auto Tuning will completely re-tune the television and can be
used to update the channel list. It is recommended that Auto

Tuning is run periodically to ensure that all new services are

added. All current channels and settings, i.e. locked channels,

will be lost.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight System Setup icon.

c Press OK to display System Setup menu.

e For DTV/ATV Tuning:

A screen will appear warning that previous
programmes and settings will be deleted.

Auto Tuning

Previous settings will be lost!
Press EXIT for no change.

DTV and ATVTuning Mode

Start Scan

Press

C or c to select DTV and ATV, DTV or ATV, if

available, then highlight Start Scan and press OK to
continue with the Auto Tuning.

NOTE: If you have selected “Others” for the Country
field in the System Setup menu, and selected a
tuning mode other than “DTV” , choose the optimum
ATV broadcasting system (B/G, I, D/K or L).

The television will start to search for all available DTV
and/or ATV services.

You must allow the television to complete the
search.

When the search is complete, the Auto Tuning screen
will display the services found.

For Satellite Tuning:

A screen will appear warning that previous programmes
and settings will be deleted.

d Press B or b to select Auto Tuning and press OK.

Press B or b to highlight Satellite and press C or c to
select the desired satellite (No.1 Sat ~ No.4 Sat or
All).

You can select Free to Air or All as the Search Option.
Highlight Start Scan and press OK to continue with
the Auto Tuning.

When the search is complete, the Auto Tuning screen
will display the services found.

f Press B or b to move through the list to select a

channel and press OK to view.

24

SETTING UP YOUR TV

ATV Manual Tuning

System

1 A C 2 0 V C R

I

123 4 65 7 8 9

Pos. Channel Station

ATV Manual Tuning

1

2

3

4

6

7

8

C2

C7

S10

S40

C22

5

C25

C28

C30

ATV Manual Tuning

System

1 A C 2 0

I

ATV Manual Tuning

Search

1 C 2 0 IA

English

ATV Manual Tuning

Tuning

The television can be tuned-in manually using ATV Manual

Tuning. For example, you might use the feature if the television

cannot be connected to a media recorder/decoder with a SCART

lead or when you want to tune-in a station on another System.

C and c to move across the screen and select any of the

Use
ATV Manual Tuning options. Then use
settings.

1 Position

The number to be pressed on the remote control to tune
the channel.

2 System

Specific to certain areas.

3 Colour System

Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.

4 Skip

Set Skip to On (

8) or Off (() for the selected channel.

See page 26.

5 Signal Class

The channel classification.

6 Channel

The channel number on which a station is being
broadcast.

7 Search

Search up and down for a signal.

8 Manual Fine Tuning

Only used if interference/weak signal is experienced. See
page 99.

9 Station

Station identification. Use the
enter up to seven characters.

To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.

B or b to adjust the

B b and C c buttons to

a In the System Setup menu, press b to select ATV

Manual Tuning and press OK.

System Setup

Menu Language

Country

Ant/Cable/Satellite

Satellite Settings

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

English

Germany

b Use B or b to select the desired position. We suggest

Pos. 0 for a media recorder.

Different Channel numbers may be displayed.

c Press OK to select. If the channel chosen for the media

recorder is set to skip, Skip should be removed before
storing.

d Press c to select System and press B or b to change

if required.

e Then press c to select Search.

f Press B or b to begin the search. The search symbol

will flash.

25

SETTING UP YOUR TV

PLEASE NOTE

ATV Manual Tuning

Station

1 A C 2 0 V C R I

Pos. Channel Station

ATV Manual Tuning

1

2

3

4

6

7

8

C2

C7

S10

S40 ABC1

ABC1C22

5

C25

C28

C30

ATV Manual Tuning

Skip: On

1 A C 2 0 I

g Each signal will show on the television. If it is not your

English

media recorder, press
search.

B or b again to restart the

h When your media rec order si gnal is fo und, pres s c to

move along to Station. Use
the required characters, e.g. VCR.

B, b, C and c to put in

i Press OK to save.

j Repeat for each position you want to tune, or press

BACK to return to the list of channels and select the
next number to tune.

k Press EXIT when you have finished.

This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step 3.
Enter the Position number, the System, then C for
standard (terrestrial) channels or S for cable
channels and the Channel number. Press OK to
save.

Skip

To prevent certain channels from being viewed, positions can be

skipped.

a Select ATV Manual Tuning from the System Setup

menu.

b Use B or b to highlight the position to be skipped

and press OK to select.

d Use B or b to turn Skip on.

Press OK.

8 on the screen indicates a skipped position.

e Press BACK and repeat from Step 2 or press EXIT.

Each position has to be individually selected. To turn
Skip off, repeat the procedure for each position.

Skipped positions cannot be selected by P
or by the controls on the television but can still be
accessed by the number buttons on the remote
control.

U and Pu

Sorting positions

Channels may be moved and saved to the position of your

choice.

a Select ATV Manual Tuning from the System Setup

menu.

b With the list of channels showing, use B or b to

highlight the channel you want to move and press

ATV Manual Tuning

Pos. Channel Station

2

S10

3

C7

4

C40

5

C22

1

C2

6

C25

7

C28

8

C30

ABC1

ABC1

c Use B or b to move through the list to your preferred

position. As you do so, the other channels will move
to make room.

c.

c Press c to select Skip.

d Press C to save your move.

Repeat as necessary and press EXIT.

26

SETTING UP YOUR TV

DTV Manual Tuning

WEAK

Signal Strength
Quality

Channel

GOOD

Start Scan

STRONGAVERAGE

13

Pos.New TypeName

ABC ONE

0 New Channels - Total 6

ABC TWO

ABC THREE

ABC NEWS 24

DTV Manual Tuning

2

1

7

40

ABCi

51

DTV Manual Tuning - Satellite

WEAK

Signal Strength
Quality

Satellite

POOR

Start Scan

STRONGAVERAGE

ASTRA 28.2°E

Transponder

1/83

Frequency

10714 MHz

Symbol Rate

22000 KS/s

Polarisation

H

Search Option

Free to Air

English

DTV Manual Tuning

NOTE: The content of this menu varies depending on the DTV

input (Antenna, Cable, or Satellite) that is currently selected.

Manual Tuning

This feature is available for service engineers or can be used for

direct channel entry if the multiplex channel is known.

a Select DTV Manual Tuning from the System Setup

menu and press OK.

b Enter the multiplex number using the number

buttons or use
down.

c Highlight Start Scan and press OK. The television will

automatically search for that multiplex.

C or c to adjust the number up or

Manual Tuning for DVB-C

When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:

Frequency – input a specific frequency to be scanned

Modulation – choose from one of five QAM modulation

options

Symbol Rate – in put a sp ecifi c baud r ate (K S/s) to be use d for
the manual scan

Highlight Start Scan and press OK.

Manual Tuning for DVB-S

When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:

Press

B or b to highlight an item (Satellite, Transponder,

Frequency, Symbol Rate, Polarisation or Search Option)

C or c to select the required option.

and press

Highlight Start Scan and press OK.

When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information at the top of the screen will be
updated.

d Repeat as necessary. Press EXIT to finish.

27

SETTING UP YOUR TV

DTV Settings

Channels

Parental PIN Setup

Subtitle and Audio

Parental Control

Local Time Setting

DVB Character Set

Dynamic Scan

Standby Channel Update

Standard

Off

On

Channels
Line No. 1/10

TV

Sort: A-Z Sort

1 ABC ONE

2 ABC TWO

Pos. Name

7 ABC THREE

30 CABC Channel

40 ABC NEWS 24

51 ABCi

822 AA

823 AC

ABC ONE

Pos.

----

Name

Sorting Type Number

Sort

Sort

DTV Settings

English

Channels (Antenna/Cable)

The channel order may be changed to suit your personal

preference.

a Select DTV Settings from the System Setup menu

and press OK.

b Select Channels and press OK.

c For y our c onv eni enc e, yo u ca n jum p to spe cifi c pl ace s

in the list by one of two methods.

Move — Press the GREEN button to activate the

Move feature. Press the

channel you wish to move and press OK to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat
as necessary.
Once all desired channels have been checked, press
the

B or b buttons to place the focus at the position

to which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.

Channels
Line No. 1/10

Pos. Name

1 ABC ONE

2 ABC TWO

7 ABC THREE

30 CABC Channel

40 ABC NEWS 24

51 ABCi

822 AA

823 AC

B or b buttons to select the

TV

Sort: A-Z Sort

Sort — Press the YELLOW button. A confirmation

window will appear. Press
press OK.

Sort
Your existing channel order will be lost. Do you wish to

continue?

The Sorting Type selection window will appear.

C or c to select Yes and

Yes

Line Number Jump —Use the number buttons

(0-9) to input the line number you want to select and
press OK.

Name Jump —Press CC or cc to jump to the

next station name with a different initial letter.

It is also possible to change the Position number of a
particular channel.

Renumber — Press the RED button to renumber

the highlighted channel. Edit the channel number
using the number buttons and press OK. If the
position number you input already exists, a
confirmation window will appear.

28

C or c to set the sorting type.

Press

A-Z Sort Station name order (A to Z)

Number Position No. order (numerical sequence)

Press

b to highlight Sort and press OK.

Channels (Satellite)

Channels
Line No. 3/1200

Satellite TV

1 DDD 19.2°E

Pos. Station Satellite

822 AA

823 AC

2AB

3E

801 BBC

802 BB

803 BA

25.6°E

25.6°E

19.2°E

19.2°E

22.5°E

22.5°E

22.5°E

Group By Satellite

Sorting Type Number

Preset Order Yes

Sort

Sort

a Select DTV Settings from the System Setup menu

and press OK.

b Select Channels and press OK.

The satellite channel list will appear.

c For your convenience, you can edit and sort your

channel list.

Line Number Jump — Press the number buttons

(0-9) to input the line number you want to select and
then press OK.

Station Letter Jump — Press CC or cc to jump

to the next station name with a different initial letter.

Satellite Jump —Press Z or z to jump to the

next channel on a different Satellite.

Renumber — Same as Antenna/Cable channels.

See page 28.

Move — Same as Antenna/Cable channels. See

page 28.

Sort — Press the YELLOW button. A confirmation

window will appear. Press
press OK.

The Sort menu will appear.

C or c to select Yes and

SETTING UP YOUR TV

Group —Press C or

Sorting Type — Press C or

A-Z Sort Station name order (A to Z)

Number Position No. order (numerical sequence)

Preset Order — Press C or

This item is displayed when Country is set to
Germany, and only applies to the Astra 19.2°E
satellite.

Press

b to highlight Sort and press OK.

c to select All or By Satellite.

c to set the sorting type.

c to set Yes or No.

Standby Channel Update

If the Standby Channel Update is set to On, when the TV is in

standby mode, Digital Tuning is automatically executed and any

new channels are saved.

a Select DTV Settings from the System Setup menu

and press OK.

b Press b to select Standby Channel Update and

press

C or c to select On.

DVB Character Set

This feature allows you to manually select the character set

(Standard = Table 0, West = Table 5 or Latin alphabet 9) to

be used for DVB-C or DVB-T channels.

a Select DTV Settings from the System Setup menu

and press OK.

b Press b to select DVB Character Set and press C or

c to select Standard, West or Latin alphabet 9.

Dynamic Scan

If the broadcast information has changed in your DVB-T

receiving area, the TV screen will display the message

“Broadcast information has changed. Would you like to

rescan now?”. Select Yes or No. If you do not wish for the TV to

detect changes and prompt you to rescan, you shou ld set this

feature to “Off”.

a Select DTV Settings from the System Setup menu

and press OK.

English

b Press b to select Dynamic Scan and press C or c to

select On.

29

SETTING UP YOUR TV

English

You can select either Home or Store mode. Home is

recommended for normal home use. Select Store when using

Location setting

the television for displaying in a shop, etc.

a Select Location from the System Setup menu.

b Press C or c to select Home or Store.

Analogue switch-off

This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.

This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.

30